选区激光熔化FeCoNiCr系高熵合金微观组织的实验研究

doi:10.12068/j.issn.1005-3026.2023.04.011

东北大学学报（自然科学版） ›› 2023, Vol. 44 ›› Issue (4): 536-543.DOI: 10.12068/j.issn.1005-3026.2023.04.011

选区激光熔化FeCoNiCr系高熵合金微观组织的实验研究

温雪龙¹，王承宝¹，刘文博¹，任海洋²

(1. 东北大学机械工程与自动化学院，辽宁沈阳110819； 2. 空军预警学院，湖北武汉430019)

发布日期:2023-04-27
通讯作者: 温雪龙
作者简介:温雪龙(1985-)，男，辽宁沈阳人，东北大学副教授.
基金资助:
国家自然科学基金资助项目(52275412)；中央高校基本科研业务费专项资金资助项目(N2103023).

Experimental Study on the Microstructure of FeCoNiCr High-Entropy Alloys by Selective Laser Melting

WEN Xue-long¹， WANG Cheng-bao¹， LIU Wen-bo¹， REN Hai-yang²

1. School of Mechanical Engineering & Automation， Northeastern University， Shenyang 110819， China; 2. Air Force Early Warning Academy， Wuhan 430019， China.

Published:2023-04-27
Contact: WEN Xue-long
About author:-
Supported by:
-

摘要/Abstract

摘要： 介绍了关于选区激光熔化的热分析理论，利用选区激光熔化技术制备FeCoNiCrAl_0.5和FeCoNiCrAl_0.8高熵合金试件.利用超景深显微镜对试件微观组织进行观测，分析了粉末粒径、元素含量，以及工艺参数等因素对选区激光熔化高熵合金的微观组织的影响.结果表明，随着激光功率增大，试件顶部等轴晶的占比越来越少，尺寸越来越细小，试件底部组织中枝晶的占比逐渐增多，尺寸不断增大；随着扫描速度增大，高熵合金试件底部组织中枝晶尺寸逐渐减小、宽度变窄；搭接率对高熵合金试件微观组织影响较小；制得的高熵合金试件存在着裂纹、凹陷及气孔等缺陷.

关键词: 选区激光熔化；高熵合金；微观组织；缺陷

Abstract: The thermal analysis theory of selective laser melting was introduced， and FeCoNiCrAl_0.5 and FeCoNiCrAl_0.8 high-entropy alloys were prepared by selective laser melting. The effects of powder particle size， element content and process parameters on the microstructure of high-entropy alloys by selective laser melting were analyzed. The results showed that with the increase of laser power， the proportion of equiaxed crystals at the top of the specimen becomes smaller， while the proportion of dendrites in the bottom of the specimen becomes larger and larger. With the increase of scanning speed， the size and width of dendrite in the bottom of high-entropy alloy specimens decrease gradually. The effect of lap ratio on the microstructure of high-entropy alloys is small. It was found that the high-entropy alloy specimens have some defects such as cracks， dents and pores.

Key words: selective laser melting; high-entropy alloy; microstructure; defect

中图分类号:

TH161

温雪龙，王承宝，刘文博，任海洋. 选区激光熔化FeCoNiCr系高熵合金微观组织的实验研究[J]. 东北大学学报（自然科学版）, 2023, 44(4): 536-543.

WEN Xue-long， WANG Cheng-bao， LIU Wen-bo， REN Hai-yang. Experimental Study on the Microstructure of FeCoNiCr High-Entropy Alloys by Selective Laser Melting[J]. Journal of Northeastern University(Natural Science), 2023, 44(4): 536-543.

参考文献

[1]Feng R，Feng B J，Gao M C，et al.Superior high-temperature strength in a supersaturated refractory high-entropy alloy ［J］.Advanced Materials，2021，33(48):2102401.
[2]Fan X J，Qu R T，Zhang Z F.Relation between strength and hardness of high-entropy alloys ［J］.Acta Metallurgica Sinica，2021，34(11):1461-1482.
[3]Lv W J，Yang X S，Ji Y Q，et al.Effects of TiC nanoparticle additions on microstructure and mechanical properties of FeCrAl alloys prepared by directed energy deposition ［J］.Journal of Nuclear Materials，2021，554:153094.
[4]Zhou K X，Li J J，Wu Q F，et al.Remelting induced fully-equiaxed microstructures with anomalous eutectics in the additive manufactured Ni32Co30Cr10Fe10Al18 eutectic high-entropy alloy ［J］.Scripta Materialia，2021，201:113952.
[5]Li X P.Additive manufacturing of advanced multi-component alloys:bulk metallic glasses and high entropy alloys ［J］.Advanced Engineering Materials，2018，20(5):170-174.
[6]Kim Y K，Baek M S，Yang S S，et al.In-situ formed oxide enables extraordinary high-cycle fatigue resistance in additively manufactured CoCrFeMnNi high-entropy alloy ［J］.Additive Manufacturing，2021，38:101832.
[7]Fujieda T，Chen M C，Shiratori H，et al.Mechanical and corrosion properties of CoCrFeNiTi-based high-entropy alloy additive manufactured using selective laser melting ［J］.Additive Manufacturing，2018，25:412-420.
[8]Zhang C C，Feng K，Kokawa H，et al.Cracking mechanism and mechanical properties of selective laser melted CoCrFeMnNi high entropy alloy using different scanning strategies ［J］.Materials Science and Engineering A，2020，789:139672.
[9]Wang B，Sun M，Li B，et al.Anisotropic response of CoCrFeMnNi high-entropy alloy fabricated by selective laser melting ［J］.Materials，2020，13(24):5687-5704.
[10]Zhang H，Zhao Y Z，Cai J，et al.High-strength NbMoTaX refractory high-entropy alloy with low stacking fault energy eutectic phase via laser additive manufacturing ［J］.Materials & Design，2021，201(5):109462.
[11]Niu P D，Li R D，Yuan T C，et al.Microstructures and properties of an equimolar AlCoCrFeNi high entropy alloy printed by selective laser melting ［J］.Intermetallics，2019，104:24-32.
[12]Su Y，Luo S C，Wang Z M.Microstructure evolution and cracking behaviors of additively manufactured AlxCrCuFeNi2 high entropy alloys via selective laser melting ［J］.Journal of Alloys and Compounds，2020，842:155823.
[13]Sun K，Peng W，Yang L，et al.Effect of SLM processing parameters on microstructures and mechanical properties of Al_0.5CoCrFeNi high entropy alloys ［J］.Metals—Open Access Metallurgy Journal，2020，10(2):292-304.
[14]Bartkowski D，Kinal G.Microstructure and wear resistance of Stellite-6/WC MMC coatings produced by laser cladding using Yb:YAG disk laser ［J］.International Journal of Refractory Metals and Hard Materials，2016，58:157-164.
[15]Zhang L，Wang C，Han L，et al.Influence of laser power on microstructure and properties of laser clad Co-based amorphous composite coatings ［J］.Surfaces and Interfaces，2017，6:18-23.
[16]Caprio L，Gkhan A，Previtali B.Observing molten pool surface oscillations during keyhole processing in laser powder bed fusion as a novel method to estimate the penetration depth ［J］.Additive Manufacturing，2020，36:101470.

选区激光熔化FeCoNiCr系高熵合金微观组织的实验研究

Experimental Study on the Microstructure of FeCoNiCr High-Entropy Alloys by Selective Laser Melting

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	焦安源，张国富，丁浩东，刘伟军. TC4钛合金孔的磁粒研磨试验[J]. 东北大学学报:自然科学版, 2020, 41(9): 1304-1310.
[2]	马廉洁，左宇辰，周云光，付海玲. 氧化锆陶瓷车削刀具几何参数的多目标优化[J]. 东北大学学报:自然科学版, 2020, 41(8): 1129-1134.
[3]	康程铭，赵春雨，付立新. 基于物理建模法的加工中心主轴热误差建模[J]. 东北大学学报:自然科学版, 2020, 41(4): 528-533.
[4]	周云光，董彪，岳新伟，谭雁清. 牙科氧化锆陶瓷微尺度磨削力研究[J]. 东北大学学报:自然科学版, 2020, 41(4): 557-562.
[5]	杨玉莹，巩亚东，屈硕硕，蔡明. 增/减材复合加工316L宏观形貌和残余应力试验[J]. 东北大学学报:自然科学版, 2020, 41(3): 380-386.
[6]	李明，于天彪，张荣闯，王宛山. 基于石墨烯强化MQL的GH4169合金铣削表面质量研究[J]. 东北大学学报:自然科学版, 2020, 41(3): 387-392.
[7]	温雪龙，于兴晨，巩亚东，孟凡涛. FeCoNiCrMo高熵合金磨削机理及表面粗糙度[J]. 东北大学学报:自然科学版, 2020, 41(2): 246-251.
[8]	屈硕硕，巩亚东，杨玉莹，舍跃斌. 2.5D C_f/SiC复合材料磨削工艺试验研究[J]. 东北大学学报:自然科学版, 2020, 41(2): 252-257.
[9]	于天彪，刘传蒙，于奎东，王宛山. 激光热辅助磨削石英玻璃的实验研究[J]. 东北大学学报:自然科学版, 2019, 40(10): 1467-1473.
[10]	屈硕硕，巩亚东，杨玉莹，蔡明. 单向碳纤维增强陶瓷基复合材料磨削表面质量研究[J]. 东北大学学报:自然科学版, 2019, 40(9): 1310-1315.
[11]	尹国强，巩亚东，李雨晴，宋俊利. 新型点磨削砂轮磨削表面/亚表面质量研究[J]. 东北大学学报:自然科学版, 2019, 40(6): 835-840.
[12]	田英健，邹平，陈硕，温泉. 轴向超声振动辅助钻削机理与试验研究[J]. 东北大学学报:自然科学版, 2019, 40(5): 705-709.
[13]	蔡明，巩亚东，屈硕硕，杨玉莹. 镍基单晶高温合金磨削表面质量及亚表面微观组织试验[J]. 东北大学学报:自然科学版, 2019, 40(3): 386-391.
[14]	蔡明，巩亚东，冯耀利，刘瑶佳. 镍基高温合金磨削表面工艺性能试验研究[J]. 东北大学学报:自然科学版, 2019, 40(2): 234-238.
[15]	陈硕，邹平，田英健，毛亮. 高温合金轴向超声振动钻削减摩机理[J]. 东北大学学报:自然科学版, 2018, 39(10): 1485-1489.