东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2004, Vol. 25 ›› Issue (1): 58-61.DOI: -

• 论著 • 上一篇    下一篇

铝热自蔓延制备CuCr合金渣系的粘度测量及模型建立(Ⅰ)

张廷安;豆志河;徐淑香;杨欢   

  1. 东北大学材料与冶金学院;东北大学材料与冶金学院;中国铝业集团;东北大学材料与冶金学院 辽宁沈阳　110004
  • 收稿日期:2013-06-24 修回日期:2013-06-24 出版日期:2004-01-15 发布日期:2013-06-24
  • 通讯作者: Zhang, T.-A.
  • 作者简介:-
  • 基金资助:
    国家自然科学基金资助项目(59971016),(50374026)·

Viscosity measurement and modeling for slag systems CuCr alloys prepared via Al thermit-SHS (I)

Zhang, Ting-An (1); Dou, Zhi-He (1); Xu, Shu-Xiang (2); Yang, Huan (1)   

  1. (1) Sch. of Mat. and Metall., Northeastern Univ., Shenyang 110004, China; (2) Aluminium Co. of China, Beijing 100088, China
  • Received:2013-06-24 Revised:2013-06-24 Online:2004-01-15 Published:2013-06-24
  • Contact: Zhang, T.-A.
  • About author:-
  • Supported by:
    -

RichHTML

1

PDF (PC)

732

摘要： 根据Al2O3基渣系的结构特点将S.C.Du和S.Seetharaman等人的粘度数学模型应用于非二氧化硅体系,建立了针对铝热反应测量渣系粘度的模型·根据添加剂选择原则结合相图研究了CaO Al2O3和CaO Al2O3 MgO体系作为铝热自蔓延制备CuCr合金渣系组分的可行性·由实验测量值和模型计算值比较分析,该模型处理以Al2O3为基体的渣系是成功的·

关键词: 铝热反应, CuCr合金, 粘度, 计算模型, 熔渣

Abstract: The viscosity model proposed by Sichen Du and S. Seetharaman et al was applied as a reference to the slag systems without SiO2, based on the constitutional characteristics of Al2O3 slag systems. A new viscosity model was developed for viscosity measurement, focusing on the reaction of aluminium thermit. The feasibility of taking CaO-Al2O3 and CaO-Al2O3-MgO systems as the constituents of the slag systems of CuCr alloy prepared via aluminium thermit-SHS is studied, according to the principle of additive selection in combination with relevant phase diagrams. An analysis was made comparing the experimental measurements with the viscosity values calculated in accordance to the new model. The result shows that it is successful to use the new model to determine the viscosity value of the slag systems which are constituted via the reaction of aluminium thermit.

中图分类号: