东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2004, Vol. 25 ›› Issue (12): 1142-1144.DOI: -

• 论著 • 上一篇    下一篇

冷连轧机出口飞剪的控制方法

葛延津;张贵强;陈岩   

  1. 东北大学信息科学与工程学院;东北大学信息科学与工程学院;东北大学信息科学与工程学院 辽宁沈阳　110004
  • 收稿日期:2013-06-24 修回日期:2013-06-24 出版日期:2004-12-15 发布日期:2013-06-24
  • 通讯作者: Zhang, G.-Q.
  • 作者简介:-
  • 基金资助:
    国家科技部创新基金资助项目(01C2621210454)

Control of flying shears by exit of tandem cold mill

Ge, Yan-Jin (1); Zhang, Gui-Qiang (1); Chen, Yan (1)   

  1. (1) Sch. of Info. Sci. and Eng., Northeastern Univ., Shenyang 110004, China
  • Received:2013-06-24 Revised:2013-06-24 Online:2004-12-15 Published:2013-06-24
  • Contact: Zhang, G.-Q.
  • About author:-
  • Supported by:
    -

RichHTML

1

PDF (PC)

614

摘要： 讨论了经冷连轧机轧制出的带钢,当其剪切点在冷连轧机的末机架出现后,轧机出口飞剪对带钢进行剪切的控制算法·在飞剪进行剪切过程中,飞剪剪刃位置是由与飞剪电动机同轴安装的凸轮开关发出的指令进行控制的·采用所述控制方法进行剪切,带钢剪切断面光滑·同时给出了在剪切过程中带钢承受的张力与正常轧制过程中张力的关系·

关键词: 飞剪, 剪切控制, KSV算法, 凸轮开关, 张力

Abstract: The control process and relevant algorithm for cutting strips by flying shears are discussed and developed under conditions that the cut point of strip is positioned near the exit of the last stand of tandem cold mill (TCM). The shear knives' position of the flying shears is controlled by the instructions sent from a cam switch which is coaxial with the motor rotor of the flying shears. The strip sections cut off by such a control procedure and relevant algorithm are proved, and the strips' tensile between this control procedure and conventional rolling process is also given.

中图分类号: