东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2006, Vol. 27 ›› Issue (7): 755-758.DOI: -

• 论著 • 上一篇    下一篇

频率对矩形电磁连铸结晶器内磁场和弯月面的影响

张林涛;王恩刚;邓元安;赫冀成;   

  1. 东北大学材料电磁过程研究教育部重点实验室;东北大学材料电磁过程研究教育部重点实验室;东北大学材料电磁过程研究教育部重点实验室;东北大学材料电磁过程研究教育部重点实验室 辽宁沈阳110004;辽宁沈阳110004;辽宁沈阳110004;辽宁沈阳110004
  • 收稿日期:2013-06-23 修回日期:2013-06-23 出版日期:2006-07-15 发布日期:2013-06-23
  • 通讯作者: Zhang, L.-T.
  • 作者简介:-
  • 基金资助:
    国家高技术研究发展计划项目(2001AA337040)

Influence of frequency on magnetic field distribution and meniscus in rectangular soft-contact EMCC mold

Zhang, Lin-Tao (1); Wang, En-Gang (1); Deng, Yuan-An (1); He, Ji-Cheng (1)   

  1. (1) The Key Laboratory of National, Electromagnetic Processing of Materials, Shenyang 110004, China
  • Received:2013-06-23 Revised:2013-06-23 Online:2006-07-15 Published:2013-06-23
  • Contact: Zhang, L.-T.
  • About author:-
  • Supported by:
    -

RichHTML

1

PDF (PC)

713

摘要： 研究了在电磁软接触连铸过程中,电源输入频率的变化对矩形电磁软接触结晶器内的磁感应强度分布规律和弯月面变化情况的影响.结果表明:当电源输入频率增大时,结晶器内的磁感应强度减小.电源输入频率的改变不影响结晶器内磁场分布的相对均匀性.弯月面的高度与电源输入频率成反比,频率越高,弯月面稳定性越好.在实际生产中,如果需要提高电源输入频率,则应该同时适当的增大电源功率来弥补激励电流的减小,以保证软接触效果.

关键词: 电磁软接触结晶器, 连铸, 频率, 磁感应强度, 弯月面

Abstract: The distribution of magnetic induction in rectangular soft-contact mold during electromagnetic continuous casting (EMCC) was investigated considering the electric frequency. The low-melting-point Sn-Pb-Bi alloy was used as simulacrum to investigate the distortion of meniscus. The results showed that the magnetic induction in mold decreases with increasing frequency while the changing frequency does not affect the uniformity of distribution of magnetic induction. The height of meniscus is in inverse proportion to the frequency, i.e., the higher the frequency, the more stable the meniscus. Actually to ensure the effect of soft-contact continuous casting, the power input should be increased to compensate the decrease in exciting current if the frequency increases.

中图分类号: