东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2012, Vol. 33 ›› Issue (7): 983-986.DOI: -

• 论著 • 上一篇    下一篇

两流T型连铸中间包结构优化

钟良才;张果;鲁碧为;刘锡海;   

  1. 东北大学材料与冶金学院;
  • 收稿日期:2013-06-19 修回日期:2013-06-19 发布日期:2013-04-04
  • 通讯作者: -
  • 作者简介:-
  • 基金资助:
    国家高技术研究发展计划项目(2007AA04Z194)

Two-strand T-type tundish configuration optimization in continuous casting

Zhong, Liang-Cai (1); Zhang, Guo (1); Lu, Bi-Wei (1); Liu, Xi-Hai (1)   

  1. (1) School of Materials and Metallurgy, Northeastern University, Shenyang 110819, China
  • Received:2013-06-19 Revised:2013-06-19 Published:2013-04-04
  • Contact: Zhong, L.-C.
  • About author:-
  • Supported by:
    -

RichHTML

0

PDF (PC)

636

摘要： 在实验室中以1∶2.5几何相似比建立了两流T型中间包钢液流动的物理模型,保持弗劳德数相等进行物理模拟实验.实验结果表明,原方案中间包结构的最小停留时间为35.00 s,峰值时间为103.75 s左右,平均停留时间约为273.42 s,活塞流体积分数约为17.88%,死区体积分数为29.53%.采用湍控器、一堰和两坝作为该中间包的控流装置,可以大幅度改善中间包的流体流动特性.结构改进后的中间包流体流动特性:最小停留时间达到151.75 s,峰值时间为281.25 s,平均停留时间为354.16 s,活塞流体积分数为55.80%,死区体积分数降低到8.73%.

关键词: 连铸, 两流T型中间包, 结构优化, 物理模拟, 控流装置

Abstract: A two-strand T-type tundish model was set up in the laboratory with 1:2.5 scale from a tundish prototype. The physical simulation experiment was conducted with Froude number being equal to each other. The results indicated that in the former tundish configuration, the minimum residence time, the peak concentration time, the mean residence time, the plug flow region proportion and the dead volume fraction are 35.00 s, 103.75 s, 273.42 s, 17.88%, 29.53%, respectively. The flow characteristics in the tundish with a turbulence inhibitor, a weir and two dams as its flow control devices can greatly be improved. The minimum residence time, the peak concentration time and the average residence time increase to 151.75 s, 281.25 s and 354.16 s, respectively in the thundish with the optimization configuration and the plug flow and dead volume fractions are 55.80% and 8.73%, respectively.

中图分类号: