东北大学学报(自然科学版) ›› 2013, Vol. 34 ›› Issue (2): 284-287.DOI: -

• 机械工程 • 上一篇    下一篇

微铣削力在高速微尺度加工中的实验研究与分析

张金峰,巩亚东,张永震,刘月明   

  1. (东北大学机械工程与自动化学院,辽宁沈阳110819)
  • 收稿日期:2012-07-24 修回日期:2012-07-24 出版日期:2013-02-15 发布日期:2013-04-04
  • 通讯作者: -
  • 作者简介:张金峰(1979-),男,山东禹城人,东北大学博士研究生;巩亚东(1958-),男,辽宁本溪人,东北大学教授,博士生导师.
  • 基金资助:
    国家自然科学基金资助项目(51075064).

Experimental Research and Analysis on Micro Milling Forces in Process of HighSpeed MicroScale Milling

ZHANG Jinfeng, GONG Yadong, ZHANG Yongzhen, LIU Yueming   

  1. School of Mechanical Engineering & Automation, Northeastern University, Shenyang 110819, China.
  • Received:2012-07-24 Revised:2012-07-24 Online:2013-02-15 Published:2013-04-04
  • Contact: ZHANG Jinfeng
  • About author:-
  • Supported by:
    -

摘要: 对微铣削过程中微铣刀刀刃受到的微铣削力进行测量,并研究其特性和变化规律.从理论角度对螺旋立铣刀的受力机理进行重点分析.借助现有的微铣削实验平台,选择典型的工件材料并设计相应的实验方法.对加工不同材料工件的刀具所受到的微铣削力进行分析,获得了微铣削力的特征和变化规律.实验结果表明:刀具受到的微铣削力随着微铣削参量的变化而变化,其变化规律与加工工件的材料性能密切相关.微铣刀刃径、每齿进给量、轴向铣削深度和材料的晶粒尺寸是引起尺寸效应的主要因素.

关键词: 微铣削力, 铣削参量, 材料性能, 尺寸效应, 立铣刀

Abstract: The milling force on micro cutter blade was investigated in order to understand the characteristics and law of highspeed milling. The forced mechanism of end milling cutter was further analyzed theoretically. The experiment was carried out in a testplatform using typical materials and methods. The results show that the laws are closely linked to the physical and mechanical properties of the materials along with the changes of micro milling parameters. Moreover, the tool edge radius, feed per tooth, axial depth of cut, and grain size of the material are the main factors causing the dimensional effect.

Key words: micro milling force, milling parameter, material property, dimensional effect, end milling cutter

中图分类号: