一种Mn-Al系TRIP钢的临界区奥氏体稳定化研究

doi:10.12068/j.issn.1005-3026.2016.02.007

东北大学学报:自然科学版 ›› 2016, Vol. 37 ›› Issue (2): 179-183.DOI: 10.12068/j.issn.1005-3026.2016.02.007

一种Mn-Al系TRIP钢的临界区奥氏体稳定化研究

胡智评，许云波，谭小东

(东北大学轧制技术及连轧自动化国家重点实验室，辽宁沈阳110819)

收稿日期:2014-12-03 修回日期:2014-12-03 出版日期:2016-02-15 发布日期:2016-02-18
通讯作者: 胡智评
作者简介:胡智评 (1989-)，男，辽宁鞍山人，东北大学博士研究生；许云波 (1976-)，男，山西盂县人，东北大学教授，博士生导师.
基金资助:
国家自然科学基金资助项目(51174059，51404155，U1260204)；国家重点基础研究发展计划项目(2011CB606306)；中央高校基本科研业务费专项资金资助项目 (N130407003)；新世纪优秀人才支持计划项目(NCET-13-0111)；辽宁省高等学校优秀人才支持计划项目(LR2014007).

Intercritical Austenite Stabilization of a Mn-Al TRIP Steel

HU Zhi-ping， XU Yun-bo， TAN Xiao-dong

State Key Laboratory of Rolling and Automation， Northeastern University， Shenyang 110819， China.

Received:2014-12-03 Revised:2014-12-03 Online:2016-02-15 Published:2016-02-18
Contact: XU Yun-bo
About author:-
Supported by:
-

摘要/Abstract

摘要： 利用实验室MMS-200热模拟试验机对Fe-0.2C-7Mn-3Al钢的临界区奥氏体稳定化行为进行研究.通过SEM，EPMA，TEM和XRD等手段观察并分析了实验钢的微观组织演变以及C和Mn元素的配分过程.实验结果表明，不同的临界区退火温度下，实验钢中均存在25%~30%左右的粗大压扁状δ铁素体.随着退火温度的升高，微观组织中残余奥氏体的含量先增加后减小，体积分数为10.2%~32.5%，残余奥氏体与临界区铁素体呈板条状相间分布，板条宽度约200~300nm.最佳的临界区退火温度为750℃. C，Mn，Al元素的协同作用促进了临界区奥氏体的稳定化，使得实验钢能够在较短的时间内完成有效的配分.

关键词: Mn-Al系TRIP钢, 奥氏体稳定化, 奥氏体逆相变, 组织演变, 残余奥氏体

Abstract: The intercritical austenite stabilization of Fe-0.2C-7Mn-3Al steel was investigated by MMS-200 thermo-mechanical test machine in the lab. The microstructure evolution and the partitioning process of C， Mn were characterized and analyzed by using SEM， EPMA， TEM and XRD. The results show that there are always 25%-30% bulky flattened ferrite at different intercritical annealing temperatures. As the intercritical annealing temperature increases， the retained austenite content in the microstructure increases first and then decreases， with the volume fraction being 10.2%-32.5%. The retained austenite and the intercritical ferrite are located with the lath shape， and the lath width is 200-300nm. The optimized annealing temperature is 750℃. The synergistic effect of C， Mn and Al promotes the austenite stabilization during intercritical annealing， which causes the partitioning process with less time of the tested steel.

Key words: Mn-Al TRIP steel, austenite stabilization, austenite reverse transformation, microstructure evolution, retained austenite

中图分类号:

TG113.12

胡智评，许云波，谭小东. 一种Mn-Al系TRIP钢的临界区奥氏体稳定化研究[J]. 东北大学学报:自然科学版, 2016, 37(2): 179-183.

HU Zhi-ping， XU Yun-bo， TAN Xiao-dong. Intercritical Austenite Stabilization of a Mn-Al TRIP Steel[J]. Journal of Northeastern University Natural Science, 2016, 37(2): 179-183.

参考文献

[1]Lee S，Lee S J，De Cooman B C.Austenite stability of ultrafine grained transformation-induced plasticity steel with Mn partitioning［J］.Scripta Materialia，2011，65(3):225-228.
[2]Gibbs P J，De Cooman B C，Brown D W，et al.Strain partitioning in ultra-fine grained medium-manganese transformation induced plasticity steel［J］.Materials Science and Engineering:A，2014，609 (15):323-333.
[3]Sohn S S，Lee S，Lee B J，et al.Effect of annealing temperature on microstructural modification and tensile properties in 0.35 C-3.5 Mn-5.8 Al lightweight steel［J］.Acta Materialia， 2013，61(13):5050-5066.
[4]Park S J，Hwang B，Lee K H，et al.Microstructure and tensile behavior of duplex low-density steel containing 5 mass% aluminum［J］.Scripta Materialia， 2013，68(6):365-369.
[5]Lee S，lee S J，De Cooman B C.Reply to comments on “austenite stability of ultrafine-grained transformation-induced plasticity steel with Mn partitioning”［J］.Scripta Materialia， 2012，66(10):832-833.
[6]Speer J，Matlock D K，De Cooman B C，et al.Carbon partitioning into austenite after martensite transformation［J］.Acta Materialia， 2003，51(9):2611-2622.
[7]De Cooman B C.Structure-properties relationship in TRIP steels containing carbide-free bainite［J］.Current Opinion in Solid State and Materials Science，2004，8(3/4):285-303.
[8]Yoo J D，Park K T.Microband-induced plasticity in a high Mn-Al-C light steel［J］.Materials Science and Engineering:A，2008，496(1/2):417-424.
[9]Remy L，Pineau A.Twinning and strain-induced F.C.C.→ H.C.P.transformation in the Fe-Mn-Cr-C system［J］. Materials Science and Engineering，1977，28(1):99-107.
[10]Xu Y B，Tan X D，Yang X L，et al.Microstructure evolution and mechanical properties of a hot-rolled directly quenched and partitioned steel containing proeutectoid ferrite［J］.Materials Science and Engineering:A，2014，607:460-475.
[11]Lee S，De Cooman B C.On the selection of the optimal intercritical annealing temperature for medium Mn TRIP steel［J］.Metallurgical and Materials Transactions:A，2013，44(11):5018-5024.
[12]Zhang R，Cao W Q，Peng Z J，et al.Intercritical rolling induced ultrafine microstructure and excellent mechanical properties of the medium-Mn steel［J］.Materials Science and Engineering:A，2013，583:84-88.
[13]Yi H L，Lee K Y，Bhadeshia H K.Mechanical stabilisation of retained austenite in δ-TRIP steel［J］.Materials Science and Engineering:A，2011，528(18):5900-5903.
[14]Cai Z H，Ding H，Misra R D K H，et al.Unique impact of ferrite in influencing austenite stability and deformation behavior in a hot-rolled Fe-Mn-Al-C steel［J］.Materials Science and Engineering:A，2014，595:86-91.
[15]Cao W Q，Wang C，Shi J，et al.Microstructure and mechanical properties of Fe-0.2C-5Mn steel processed by ART-annealing［J］. Materials Science and Engineering:A，2011，528(22/23):6661-6666.
[16]Santofimia M J，Zhao L，Petrov R，et al.Microstructural development during the quenching and partitioning process in a newly designed low-carbon steel［J］.Acta Materialia，2011，59(15):6059-6068.

一种Mn-Al系TRIP钢的临界区奥氏体稳定化研究

Intercritical Austenite Stabilization of a Mn-Al TRIP Steel

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	周成，刘文鹏，叶其斌，王昭东. 亚稳奥氏体对高强度海洋工程用钢力学性能的影响[J]. 东北大学学报（自然科学版）, 2021, 42(10): 1400-1406.
[2]	黄慧强，邸洪双，张天宇，闫宁. 两相区退火温度对高铝低硅TRIP钢组织性能的影响[J]. 东北大学学报:自然科学版, 2019, 40(12): 1700-1706.
[3]	王晓晖，康健，袁国，王国栋. 等温处理过程热轧TRIP钢残余奥氏体的分解行为[J]. 东北大学学报:自然科学版, 2019, 40(1): 32-37.
[4]	陈其源，周晓光，刘振宇，吴思炜. Ti微合金化汽车大梁钢510L的组织性能[J]. 东北大学学报:自然科学版, 2018, 39(3): 339-344.
[5]	李云杰，康健，袁国，王国栋. 低碳Si-Mn系DQ&P钢组织演变模拟研究[J]. 东北大学学报:自然科学版, 2017, 38(1): 36-41.
[6]	李志超，丁桦，蔡志辉，李美玲. 退火时间对中锰热轧TRIP钢组织演变的影响[J]. 东北大学学报:自然科学版, 2015, 36(9): 1256-1260.
[7]	彭良贵，刘伟杰，刘相华，支颖. 基于动态碳配分机制的高强塑积热成形钢研究[J]. 东北大学学报:自然科学版, 2015, 36(8): 1110-1115.
[8]	卢日环，刘相华，闫述，刘立忠. 瞬时淬火工艺下低碳钢的组织演变规律[J]. 东北大学学报:自然科学版, 2015, 36(11): 1567-1571.
[9]	沈鑫珺，裴新华，唐帅，王国栋. 卷取温度对热轧F/B双相钢组织性能的影响[J]. 东北大学学报:自然科学版, 2014, 35(8): 1120-1123.
[10]	谭小东，许云波，杨小龙，吴迪. 一步淬火分配钢的工艺设计与微观组织演变[J]. 东北大学学报:自然科学版, 2014, 35(5): 681-685.
[11]	谢辉，杜林秀，胡军. 冷却工艺对低碳Ti微合金化热轧超高强钢组织性能的影响[J]. 东北大学学报:自然科学版, 2014, 35(4): 508-511.
[12]	赵阳，袁晓云，陈礼清，刘相华. S38MnSiV非调质钢热变形行为及组织演变[J]. 东北大学学报(自然科学版), 2013, 34(9): 1244-1247.
[13]	朱丽娟;吴迪;赵宪明;周晓光;. TRIP钢在连续冷却过程中的相变行为[J]. 东北大学学报(自然科学版), 2008, 29(5): 685-688.
[14]	路贵民;史立峰;王平;崔建忠;. ZL201合金半固态二次加热时的组织演变[J]. 东北大学学报(自然科学版), 2006, 27(6): 669-672.
[15]	刘建勋;李壮;吴迪;迟伟凡;. 新一代热轧TRIP钢的研究[J]. 东北大学学报(自然科学版), 2006, 27(4): 418-421.