游梁式抽油机悬点负载耦合动力学建模

doi:10.12068/j.issn.1005-3026.2016.09.003

东北大学学报:自然科学版 ›› 2016, Vol. 37 ›› Issue (9): 1225-1229.DOI: 10.12068/j.issn.1005-3026.2016.09.003

游梁式抽油机悬点负载耦合动力学建模

李翔宇¹，高宪文¹，侯延彬¹，王宏日²

(1. 东北大学信息科学与工程学院，辽宁沈阳110819; 2.装甲兵技术学院控制工程系，吉林长春130117)

收稿日期:2015-06-17 修回日期:2015-06-17 出版日期:2016-09-15 发布日期:2016-09-18
通讯作者: 李翔宇
作者简介:李翔宇(1982-)，男，辽宁沈阳人，东北大学博士研究生；高宪文(1954-)，男，辽宁盘锦人，东北大学教授，博士生导师.
基金资助:
国家自然科学基金资助项目(61573088，61433004).

Coupled Dynamic Modeling for Polished Rod Load of Beam Pumping Unit

LI Xiang-yu¹， GAO Xian-wen¹， HOU Yan-bin¹， WANG Hong-ri²

1. School of Information Science & Engineering， Northeastern University， Shenyang 110819， China; 2. Department of Control Engineering，Armored Force Technique Institute，Changchun 130117，China.

Received:2015-06-17 Revised:2015-06-17 Online:2016-09-15 Published:2016-09-18
Contact: GAO Xian-wen
About author:-
Supported by:
-

摘要/Abstract

摘要： 建立了描述游梁式抽油机悬点负载动态特性的耦合动力学模型.采用多自由度的弹簧-质量-阻尼器机械动力学系统描述抽油杆柱振动特性.综合考虑有杆泵抽汲过程中泵腔内气体可压缩性、泵腔压力变化、泵阀局部阻力等因素的影响，建立了泵腔压力、进泵流体流量、泵腔内液体体积与柱塞运动之间相互关系的数学模型，得到一组描述有杆泵动态抽汲过程的新模型，确定了求解抽油杆柱振动模型的井下边界条件.采用时步有限元方法对所建杆-泵耦合动力学模型进行仿真计算.油田现场应用表明，所建模型具有较高精度，可用于抽油井负荷、泵效、扭矩和平衡度等工况参数预测及故障诊断.

关键词: 游梁式抽油机, 悬点负载, 抽油杆柱, 抽油泵, 动力学建模

Abstract: A coupled dynamic model for describing the dynamic performance of the polished rod load of beam pumping units was established. The multi-degree-of-freedom spring-quality-damper mechanical dynamic system was adopted to describe the vibration characteristic of the sucker rod string. The compressibility of the gas in the pump barrel， the changing pressure in the pump barrel and local resistance of the pump valve were comprehensively considered. The new equations describing the dynamic sucker rod pumping process were set up in order to determine downhole boundary conditions to solve the sucker rod string vibration model， which represented the interrelationship between the pressure in the pump barrel， the fluid flow into the pump barrel， the volume of the fluid in the pump barrel and the movement of the plunger piston. The time-stepping finite element method was employed to simulate the rod-pump coupled dynamic model. Oil field application shows the fairly effectiveness and accuracy of the new model， which can be used for the prediction of the working condition parameters such as the load， pump efficiency， torque and balance， and the fault diagnosis.

Key words: beam pumping unit, polished rod load, sucker rod string, oil pump, dynamic modeling

中图分类号:

N941.3

李翔宇，高宪文，侯延彬，王宏日. 游梁式抽油机悬点负载耦合动力学建模[J]. 东北大学学报:自然科学版, 2016, 37(9): 1225-1229.

LI Xiang-yu， GAO Xian-wen， HOU Yan-bin， WANG Hong-ri. Coupled Dynamic Modeling for Polished Rod Load of Beam Pumping Unit[J]. Journal of Northeastern University Natural Science, 2016, 37(9): 1225-1229.

参考文献

[1]李琨，高宪文，仇治学，等.有杆泵抽油系统井下工况诊断的物元分析方法［J］.东北大学学报(自然科学版)，2013，34(5):613-617.(Li Kun，Gao Xian-wen，Qiu Zhi-xue，et al.Matter-element analysis method of downhole conditions diagnosis for suck rod pumping system［J］.Journal of Northeastern University(Natural Science)，2013，34(5):613-617.)
[2]Li K，Gao X W，Tian Z D，et al.Using the curve moment and the PSO-SVM method to diagnose downhole conditions of a sucker rod pumping unit［J］.Petroleum Science，2013，10(1):73-80.
[3]Hou Y B，Gao X W，Wang M S，et al.Application of dynamic liquid level prediction model based on improved SVR in sucker rod pump oil wells［C］// Proceedings of the 32nd Chinese Control Conference.Xi’an，2013:7826-7830．
[4]Xing M M，Dong S M，Tong Z X，et al.Dynamic simulation and efficiency analysis of beam pumping system［J］.Journal of Central South University，2015，22(9):3367-3379.
[5]Peng G L，He J，Yang S P，et al.Application of the fiber-optic distributed temperature sensing for monitoring the liquid level of producing oil wells［J］.Measurement，2014，58:130-137.
[6]Luan G H，He S L，Yang Z，et al.A prediction model for a new deep-rod pumping system［J］.Journal of Petroleum Science and Engineering，2012，80(1):75-80.
[7]Li X Y，Gao X W，Cui Y B，et al.Dynamic liquid level modeling of sucker-rod pumping systems based on Gaussian process regression［C］// Proceedings of 2013 9th International Conference on Natural Computation.Shenyang，2013:917-922.
[8]李翔宇，高宪文，侯延彬.基于在线动态高斯过程回归抽油井动液面软测量建模［J］.化工学报，2015，66(6):2150-2158.(Li Xiang-yu，Gao Xian-wen，Hou Yan-bin.Online dynamic Gaussian process regression for dynamic liquid level soft sensing of sucker-rod pumping well［J］.Journal of Chemical Industry and Engineering，2015，66(6):2150-2158.)
[9]Gibbs S G，Miller D L.Inferring power consumption and electrical performance from motor speed in oil-well pumping units［J］.IEEE Transactions on Industry Applications，1997，33(1):187-193.
[10]刘芳超，王素玲，徐广元，等.细长抽油杆柱振动特性数值研究［J］.钻采工艺，2013，36(6):82-85.(Liu Fang-chao，Wang Su-ling，Xu Guang-yuan，et al.Numerical simulation study on vibration performance of slender sucker rod［J］.Drilling & Production Technology，2013，36(6):82-85.)

游梁式抽油机悬点负载耦合动力学建模

Coupled Dynamic Modeling for Polished Rod Load of Beam Pumping Unit

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics

本文评价

[1]	胡蛟，胡茑庆，沈建，罗鹏. 直升机主减典型部件故障动力学建模与仿真[J]. 东北大学学报（自然科学版）, 2022, 43(12): 1732-1740.
[2]	赵丽;汪林. 油田游梁式抽油机几种节能方法分析及论证[J]. 东北大学学报:自然科学版, 1993, 14(5): 536--.