试件形状对铝合金摩擦叠焊成形的影响

doi:10.12068/j.issn.1005-3026.2018.07.018

东北大学学报:自然科学版 ›› 2018, Vol. 39 ›› Issue (7): 1000-1004.DOI: 10.12068/j.issn.1005-3026.2018.07.018

试件形状对铝合金摩擦叠焊成形的影响

任朝晖，鞠建忠，吕冬杰，徐宇航

(东北大学机械工程与自动化学院，辽宁沈阳110819)

收稿日期:2017-03-13 修回日期:2017-03-13 出版日期:2018-07-15 发布日期:2018-07-11
通讯作者: 任朝晖
作者简介:任朝晖(1968-)，男，辽宁沈阳人，东北大学教授．冯明杰(1971-)，男，河南禹州人，东北大学副教授; 王恩刚(1962-)，男，辽宁沈阳人，东北大学教授，博士生导师.
基金资助:
国家自然科学基金资助项目(51475084)；国家重点研究发展计划项目(2017YFB1103700).国家自然科学基金资助项目(51171041).

Effects of Specimen Shapes on the Friction Hydro-Pillar Processing Forming of Aluminum Alloys

REN Zhao-hui， JU Jian-zhong， LYU Dong-jie， XU Yu-hang

School of Mechanical Engineering & Automation， Northeastern University， Shenyang 110819， China.

Received:2017-03-13 Revised:2017-03-13 Online:2018-07-15 Published:2018-07-11
Contact: REN Zhao-hui
About author:-
Supported by:
-

摘要/Abstract

摘要： 为了研究不同试件形状对铝合金摩擦叠焊单元成形的影响，选取7075铝合金为试验对象，使用ABAQUS有限元软件，对摩擦叠焊单元成形这一复杂的热力耦合过程进行数值模拟，在将其简化为二维轴对称模型的基础上，采用FRIC子程序和网格重划分技术进行分析.对比温度云图、变形情况以及应力分布，结果表明:试件形状能够影响焊接缺陷产生的以及缺陷的尺寸;相对于焊棒形状，焊孔形状对焊接缺陷产生的影响更大，直角焊孔对塑性金属的流动阻碍作用最大，倒角焊孔次之.圆角焊孔阻碍作用最小，更容易得到较好的焊接质量.

关键词: 摩擦叠焊, 试件形状, 热力耦合, 7075铝合金, 焊接缺陷

Abstract: In order to study the effects of different specimen shapes on the friction hydro-pillar processing (FHPP) forming of aluminum alloys， 7075 aluminum alloy was selected as the experimental object， and the ABAQUS finite element software was used. The numerical simulation of the complex thermo-mechanical coupling process of FHPP was simplified to a two-dimensional axisymmetric model and analyzed with FRIC subroutine and grid remeshing technique. By comparing the temperature cloud， deformation and stress distribution， the results showed that the shape of the specimen can affect the forming of welding defects and the defect size， the shape of the welding hole has a greater impact on the welding defect than the shape of welding rod and the fillet can be very good to prevent the forming of welding defects， the rectangular weld hole has the largest effect on hindering the fluidity for plastic metals， the chamfer weld hole has a second influence， and the fillet weld hole has the least influence which leads to better welding quality.

Key words: FHPP(friction hydro-pillar processing), specimen shape, thermo-mechanical coupling, 7075 aluminum alloy, welding defect

中图分类号:

TG453

任朝晖，鞠建忠，吕冬杰，徐宇航. 试件形状对铝合金摩擦叠焊成形的影响[J]. 东北大学学报:自然科学版, 2018, 39(7): 1000-1004.

REN Zhao-hui， JU Jian-zhong， LYU Dong-jie， XU Yu-hang. Effects of Specimen Shapes on the Friction Hydro-Pillar Processing Forming of Aluminum Alloys[J]. Journal of Northeastern University Natural Science, 2018, 39(7): 1000-1004.

参考文献

[1]Andrews R E，Mitchell J S.Underwater repair by friction stitch welding ［J］.Metals & Materials，1990，6(12):796-797.
[2]Shinoda T，Fujikawa T.Appropriateness of friction hydro pillar processing (FHPP) condition［J］.Pre-prints of the National Meeting of JWS，2003，73:16-17.
[3]Meyer A.Friction hydro pillar processing:bonding mechanism and properties［D］.Braunschweig:Technischen Universitat Carolo-Wilhelmina，2003.
[4]Katoh K，Tokisue H.Friction hydro pillar processing using 2024 and 7075 aluminum alloys ［J］.Pre-prints of the National Meeting of JWS，2006，78:50-51.
[5]Du B，Sun Z P，Yang X Q.Characteristics of friction plug welding to 10mm thick AA2219-T87 sheet:weld formation，microstructure and mechanical property ［J］.Materials Science and Engineering:A，2016，654:21-29.
[6]Zhang X D，Deng C Y，Wang D P.Improving bonding quality of underwater friction stitch welds by selecting appropriate plug material and welding parameters and optimizing joint design［J］.Materials and Design，2016，91:398-410.
[7]Cui L，Yang X Q，Wang D P.Experimental study of friction taper plug welding for low alloy structure steel:welding process，defects，microstructures and mechanical properties［J］.Materials and Design，2014，62(10):271-281.
[8]曲瑞，杨立军，田丽峰，等.摩擦叠焊单元成形过程分析［J］.机械工程学报，2016，52(8):97-103.(Qu Rui，Yang Li-jun，Tian Li-feng，et al.Procedure analysis of friction hydro pillar processing ［J］.Journal of Mechanical Engineering，2016，52(8):97-103.)
[9]高辉，焦向东，周灿丰，等.基于ABAQUS的水下摩擦螺柱焊焊接过程仿真［J］.焊接学报，2014，35(12):50-54.(Gao Hui，Jiao Xiang-dong，Zhou Can-feng，et al.Study on simulation of underwater friction stud welding process based on ABAQUS［J］.Transactions of the China Welding Institution，2014，35(12):50-54.)
[10]刘兵，彭超群，王日初.大飞机用铝合金的研究现状及展望［J］.中国有色金属学报，2010，20(9):1705-1715.(Liu Bing，Peng Chao-qun，Wang Ri-chu.Recent development and prospects for giant plane aluminum alloys ［J］.The Chinese Journal of Nonferrous Metals，2010，20(9):1705-1715.)

试件形状对铝合金摩擦叠焊成形的影响

Effects of Specimen Shapes on the Friction Hydro-Pillar Processing Forming of Aluminum Alloys

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 8

编辑推荐

Metrics

本文评价

[1]	冯莹莹，赵双，刘照松，骆宗安. 7075铝合金搅拌摩擦焊模拟与实验研究[J]. 东北大学学报（自然科学版）, 2021, 42(3): 340-346.
[2]	修世超，卢跃，孙聪，李清良. 端面磨削动态热力耦合效应及对表面去除过程影响[J]. 东北大学学报（自然科学版）, 2021, 42(3): 389-395.
[3]	任朝晖，刘振，周世华，段景曦. 钛合金激光熔丝增材制造的温度场与应力场模拟[J]. 东北大学学报:自然科学版, 2020, 41(4): 551-556.
[4]	杨天娇，王述红，张泽，高钰. 寒区隧道围岩水热力耦合数值分析[J]. 东北大学学报:自然科学版, 2019, 40(8): 1178-1184.
[5]	张修铭，刘莉娟，修世超，白斌. 基于热-力耦合磨削表层残余应力的仿真分析[J]. 东北大学学报:自然科学版, 2014, 35(12): 1758-1762.
[6]	王高松;赵志浩;崔建忠;董帅;. 不同磁场条件对双流铸造7075铝合金组织的影响[J]. 东北大学学报(自然科学版), 2011, 32(5): 679-682+695.
[7]	周娜;王丙兴;吴迪;张殿华;. 中厚板控冷过程的温度-应力耦合计算与翘曲分析[J]. 东北大学学报(自然科学版), 2007, 28(12): 1717-1720.
[8]	路贵民;董杰;石路;崔建忠. 液相线半连续铸造7075铝合金半固态组织演变[J]. 东北大学学报:自然科学版, 2002, 23(2): 148-151.