基于磨粒轨迹的双端面磨削材料去除均匀性研究

doi:10.12068/j.issn.1005-3026.2020.12.009

东北大学学报:自然科学版 ›› 2020, Vol. 41 ›› Issue (12): 1727-1732.DOI: 10.12068/j.issn.1005-3026.2020.12.009

基于磨粒轨迹的双端面磨削材料去除均匀性研究

李清良¹，修世超¹，张鹏¹，王昆²

(1.东北大学机械工程与自动化学院，辽宁沈阳 110819； 2. 沈阳海默数控机床有限公司，辽宁沈阳 110179)

收稿日期:2020-04-29 修回日期:2020-04-29 出版日期:2020-12-15 发布日期:2020-12-22
通讯作者: 李清良
作者简介:李清良(1987-)，男，辽宁大连人，东北大学博士研究生；修世超(1959-)，男，内蒙古赤峰人，东北大学教授，博士生导师.
基金资助:
国家自然科学基金资助项目(51775101)；中央高校基本科研业务费专项资金资助项目(N180306003).

Study on Surface Material Removal Uniformity in Double Side Grinding Based on Abrasive Particle Trajectories

LI Qing-liang¹， XIU Shi-chao¹， ZHANG Peng¹， WANG Kun²

1. School of Mechanical Engineering & Automation，Northeastern University， Shenyang 110819， China; 2. Shenyang Hermos CNC Machine Co.， Ltd.， Shenyang 110179， China.

Received:2020-04-29 Revised:2020-04-29 Online:2020-12-15 Published:2020-12-22
Contact: XIU Shi-chao
About author:-
Supported by:
-

摘要/Abstract

摘要： 双端面磨削加工中，工件上下表面由两个端面砂轮分别以面接触形式磨削，具有较高的加工效率，但往往存在着表面材料去除量不均匀现象.为了分析双端面磨削中工件表面材料非均匀性去除影响因素，建立端面磨削中材料去除量分布模型，在不同磨削参数下进行仿真与实验研究.结果表明，砂轮与工件转速比的大小对工件表面去除均匀性具有显著影响.仿真与实验结果趋势一致，为改善端面磨削表面材料去除均匀性、提高表面质量提供了理论依据.

关键词: 双端面磨削, 表面质量, 磨粒轨迹, 材料去除, 均匀性

Abstract: In the double side grinding process， the two surfaces of the workpiece were ground separately by two end grinding wheels， which has a high processing efficiency. However， the removal non-uniformity of surface materials still exists. Material removal distribution model was established and the simulation and experimental researches were carried out under different grinding parameters in order to analyze the factors affecting the removal non-uniformity of surface materials in the double side grinding. The research demonstrated that the speed ratio of the grinding wheel and the workpiece has a significant effect on the removal uniformity of surface materials. The simulation data was consistent with the experimental results， which provides a theoretical basis for improving the removal uniformity of surface materials and surface quality.

Key words: double side grinding, surface quality, abrasive particle trajectory, material removal, uniformity

中图分类号:

TG580

李清良，修世超，张鹏，王昆. 基于磨粒轨迹的双端面磨削材料去除均匀性研究[J]. 东北大学学报:自然科学版, 2020, 41(12): 1727-1732.

LI Qing-liang， XIU Shi-chao， ZHANG Peng， WANG Kun. Study on Surface Material Removal Uniformity in Double Side Grinding Based on Abrasive Particle Trajectories[J]. Journal of Northeastern University Natural Science, 2020, 41(12): 1727-1732.

参考文献

[1]Zhang D K，Li C H，Jia D Z，et al.Grinding model and material removal mechanism of medical nanometer zirconia ceramics［J］.Recent Pat Nanotech，2014，8(1):2-17.
[2]鲁翰敏，温嘉旺，修世超，等.多尺度点磨削表面纹理功能及摩擦学特性分析［J］.机械设计与制造，2016(7):93-95.(Lu Han-min，Wen Jia-wang，Xiu Shi-chao，et al.Analysis of multi-scale point grinding surface texture features and tribological properties［J］.Machinery Design & Manufacture，2016(7):93-95.)
[3]王胜，张强，李长河.有限元建模方法在磨削加工中的应用［J］.精密制造与自动化，2013(1):40-45.(Wang Sheng，Zhang Qiang，Li Chang-he.Finite element modeling approaches in grinding［J］.Precise Manufacturing & Automation，2013(1):40-45.)
[4]Hocheng H，Tsai H Y，Tsai M S.Effects of kinematic variables on nonuniformity in chemical mechanical planarization［J］.International Journal of Machine Tools Manufacture，2000，40(11):1651-1669.
[5]Kasai T.A kinematic analysis of disk motion in a double sided polisher for chemical mechanical planarization (CMP)［J］.Tribology International，2008，41(2):111-118.
[6]Kim H，Jeong H.Effect of process conditions on uniformity of velocity and wear distance of pad and wafer during chemical mechanical planarization［J］.Journal of Electronic Materials，2004，33(1):53-60.
[7]Hu Z W，Fang C F，Deng W W，et al.Speed ratio optimization for ceramic lapping with fixed diamond pellets［J］.International Journal of Advanced Manufacturing Technology，2017，90:3159-3169.
[8]Tam H Y，Cheng H.An investigation of the effects of the tool path on the removal of material in polishing［J］.Journal of Materials Processing Technology，2010，210(5):807-818.
[9]Tso P L，Wang Y Y，Tsai M J.A study of carrier motion on a dual-face CMP machine［J］.Journal of Materials Processing Technology，2001，116(2/3):194-200.
[10]Baisie E A，Li Z C，Zhang X H.Design optimization of diamond disk pad conditioners［J］.International Journal of Advanced Manufacturing Technology，2013，66:2041-2052.
[11]Lee H，Lee D，Jeong H.Mechanical aspects of the chemical mechanical polishing process:A review［J］.International Journal of Precision Engineering Manufacturing，2016，17(4):525-536.
[12]Sousa F J P，Aurich J C，Weingaertner W L，et al.Kinematics of a single abrasive particle during the industrial polishing process of porcelain stoneware tiles［J］.Journal of the European Ceramic Society，2007，27(10):3183-3190.
[13]Yuan J，Yao W，Zhao P，et al.Kinematics and trajectory of both-sides cylindrical lapping process in planetary motion type［J］.International Journal of Machine Tools Manufacture，2015，92:60-71.
[14]Zhang C J，Tong J L，Zhao B，et al.Research on removal mechanism and surface features of Al₂O₃ engineering ceramics in ultrasonic lapping［J］.Key Engineering Materials，2014，621:146-152.
[15]Fang C F，Zhao Z X，Lu L Y，et al.Influence of fixed abrasive configuration on the polishing process of silicon wafers［J］.International Journal of Advanced Manufacturing Technology，2017，88(1):1-10.
[16]Wang L J，Hu Z W，Fang C F，et al.Study on the double-sided grinding of sapphire substrates with the trajectory method［J］.Precision Engineering，2018，51:308-318.
[17]Zhao D，Wang T，He Y，et al.Kinematic optimization for chemical mechanical polishing based on statistical analysis of particle trajectories［J］.IEEE Transactions on Semiconductor Manufacturing，2013，26(4):556-563.
[18]王庆仓，张晓东，苏建修，等.SiC单晶片化学机械研磨试验研究［J］.表面技术，2015(4):137-140.(Wang Qing-cang，Zhang Xiao-dong，Su Jian-xiu，et al.Experimental study on chemical mechanical lapping of SiC single crystal wafer［J］.Surface Technology，2015(4):137-140.)
[19]Sharp K W，Miller M H，Scattergood R O.Analysis of the grain depth-of-cut in plunge grinding［J］.Precision Engineering，2000，24(3):220-230.
[20]Fang C F，Liu C，Zhao Z X，et al.Study on geometrical patterns of textured fixed-abrasive pads in sapphire lapping based on trajectory analysis［J］.Precision Engineering，2018，53:169-178.

基于磨粒轨迹的双端面磨削材料去除均匀性研究

Study on Surface Material Removal Uniformity in Double Side Grinding Based on Abrasive Particle Trajectories

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	温雪龙，王承宝，巩亚东，孙付强. 涂层微磨具的制备及磨削表面质量实验研究[J]. 东北大学学报（自然科学版）, 2022, 43(5): 681-688.
[2]	温雪龙，李佳育，李欣妍. TiC涂层微磨具磨削表面质量影响因素[J]. 东北大学学报（自然科学版）, 2022, 43(4): 534-540.
[3]	周云光，田川川，马廉洁，毕长波. 氧化锆陶瓷微尺度磨削表面质量试验研究[J]. 东北大学学报（自然科学版）, 2022, 43(1): 83-88.
[4]	马哲伦，于奎东，董金龙，于天彪. Al₂O₃陶瓷的激光辅助磨削机理[J]. 东北大学学报:自然科学版, 2020, 41(4): 541-546.
[5]	李明，于天彪，张荣闯，王宛山. 基于石墨烯强化MQL的GH4169合金铣削表面质量研究[J]. 东北大学学报:自然科学版, 2020, 41(3): 387-392.
[6]	王海艳，陶克新，金天. 球头铣刀螺旋铣孔材料去除及孔形成过程分析[J]. 东北大学学报:自然科学版, 2020, 41(11): 1602-1608.
[7]	屈硕硕，巩亚东，杨玉莹，蔡明. 单向碳纤维增强陶瓷基复合材料磨削表面质量研究[J]. 东北大学学报:自然科学版, 2019, 40(9): 1310-1315.
[8]	刘静，李家栋，王昊杰，王昭东. 真空渗碳炉加热系统结构优化数值模拟研究[J]. 东北大学学报:自然科学版, 2019, 40(5): 641-646.
[9]	蔡明，巩亚东，屈硕硕，杨玉莹. 镍基单晶高温合金磨削表面质量及亚表面微观组织试验[J]. 东北大学学报:自然科学版, 2019, 40(3): 386-391.
[10]	武晓刚，何纯玉，矫志杰，王君. 厚规格钢板差厚轧制数值模拟与工艺研究[J]. 东北大学学报:自然科学版, 2019, 40(2): 197-201.
[11]	李强，巩亚东，梁彩霞，刘洺君. 基于水基MQL的DD5单晶合金铣削表面粗糙度研究[J]. 东北大学学报:自然科学版, 2018, 39(9): 1293-1298.
[12]	巩亚东，马晓腾，孙瑶. 基于响应曲面法电火花线切割回转零件实验研究[J]. 东北大学学报:自然科学版, 2018, 39(7): 1005-1010.
[13]	贾蓬，秦兵，王良，刘志超. 高轴向应力下围岩环状破裂模式及其影响因素[J]. 东北大学学报:自然科学版, 2018, 39(4): 564-569.
[14]	陈岩，芦旭，江鹏，关振群. 影响螺纹副轴向力分布均匀性的关键因素分析[J]. 东北大学学报:自然科学版, 2017, 38(8): 1142-1147.
[15]	利成宁，袁国，康健，王国栋. 异步热轧对低合金钢显微组织及力学性能的影响[J]. 东北大学学报:自然科学版, 2017, 38(7): 941-945.