东北大学学报:自然科学版 ›› 2018, Vol. 39 ›› Issue (6): 856-861.DOI: 10.12068/j.issn.1005-3026.2018.06.019

• 机械工程 • 上一篇    下一篇

失谐整体叶盘的硬涂层减振研究

高峰, 孙伟   

  1. (东北大学 机械工程与自动化学院, 辽宁 沈阳110819)
  • 收稿日期:2017-02-24 修回日期:2017-02-24 出版日期:2018-06-15 发布日期:2018-06-22
  • 通讯作者: 高峰
  • 作者简介:高峰(1990-),男,山东临沂人,东北大学博士研究生; 孙伟(1975-),男,辽宁营口人,东北大学教授,博士生导师.冯明杰(1971-), 男, 河南禹州人, 东北大学副教授; 王恩刚(1962-), 男, 辽宁沈阳人, 东北大学教授,博士生导师.
  • 基金资助:
    国家自然科学基金资助项目(51775092).国家自然科学基金资助项目(51171041).

On the Vibration Reduction of Mistuned Blisks by Hard Coating

GAO Feng, SUN Wei   

  1. School of Mechanical Engineering & Automation, Northeastern University, Shenyang 110819, China.
  • Received:2017-02-24 Revised:2017-02-24 Online:2018-06-15 Published:2018-06-22
  • Contact: SUN Wei
  • About author:-
  • Supported by:
    -

摘要: 提出一种对叶片涂敷硬涂层的减振方法来提高失谐整体叶盘的可靠性,并以叶片双面涂敷NiCoCrAlY+YSZ硬涂层的失谐整体叶盘为例进行振动研究.首先,为了在保证计算精度的前提下提高计算效率,利用固定界面动刚度模态综合法对涂层叶盘有限元模型进行了减缩处理;其次,基于该有限元减缩模型对涂层叶盘进行模态分析,并与全尺寸有限元模型做出了数据比较;最后探究了硬涂层对整体叶盘的影响.研究结果表明,NiCoCrAlY+YSZ硬涂层具有较强的阻尼效应,能够显著抑制整体叶盘的共振响应.

关键词: 失谐整体叶盘, 硬涂层, 减缩模型, 阻尼减振

Abstract: A vibration reduction method by hard coating was proposed to improve the working reliability of mistuned blisks (integrally bladed disks), and the mistuned blisk with depositing NiCoCrAlY+YSZ hard coating on both sides of the blades was taken as an example to conduct the vibration investigation. Firstly, the ROM (reduced-order model) of the hard-coated blisk, which can improve the computational efficiency under the premise of ensuring the computational precision, was established by using an improved fixed-IDSMSM (fixed interface dynamic stiffness modal synthesis method). Secondly, the modal analysis of the hard-coated blisk was achieved based on the proposed ROM, and the results were compared with those of the FOM (full-order FEM). Finally, the influence of hard coating on mistuned blisks was studied. The results revealed that the NiCoCrAlY+YSZ hard coating has a good damping effect on mistuned blisks, and can suppress remarkably the resonant response of mistuned blisks.

Key words: mistuned blisk, hard coating, reduced-order model, damped vibration reduction

中图分类号: