Ω形阶梯径向流变压吸附床制氧特性的数值模拟

doi:10.12068/j.issn.1005-3026.2020.04.011

东北大学学报:自然科学版 ›› 2020, Vol. 41 ›› Issue (4): 516-520.DOI: 10.12068/j.issn.1005-3026.2020.04.011

Ω形阶梯径向流变压吸附床制氧特性的数值模拟

冯明杰，徐凤森，周帅磊

(东北大学冶金学院，辽宁沈阳110819)

收稿日期:2019-05-21 修回日期:2019-05-21 出版日期:2020-04-15 发布日期:2020-04-17
通讯作者: 冯明杰
作者简介:冯明杰(1971-)，男，河南禹州人，东北大学副教授.
基金资助:
国家重点研发计划项目(2017YFA0700300).

Numerical Simulation of Oxygen Generation Characteristics of Ω-Shaped Step Radial Flow Pressure Swing Adsorbent Bed

FENG Ming-jie， XU Feng-sen， ZHOU Shuai-lei

School of Metallurgy， Northeastern University， Shenyang 110819， China.

Received:2019-05-21 Revised:2019-05-21 Online:2020-04-15 Published:2020-04-17
Contact: XU Feng-sen
About author:-
Supported by:
-

摘要/Abstract

摘要： 为了提高PSA制氧设备的性能，设计了一种Ω形阶梯径向流吸附床.以Fluent 16.0为计算平台，采用数值模拟的方法研究了该吸附床的流场、浓度场、制氧特性和床层穿透时间等参数的变化规律，并与传统的Π形径向流吸附床进行了比较.结果表明:在同样条件下，与Π形床相比，Ω形阶梯径向流吸附床的穿透时间显著延长，流动不均匀区显著缩小；Ω形阶梯径向流吸附床成品气O₂的摩尔分数可达91.8%，Π形床仅为87.1%.在吸附阶段，两种吸附床内O₂的高摩尔分数区外形存在明显差异，Ω形阶梯径向流吸附床内O₂的高摩尔分数区以近圆杯状向前推进，Π形床则以长圆锥状向前推进.

关键词: 变压吸附, PSA制氧, 径向流, 吸附床, 氧气浓度

Abstract: In order to improve the performance of PSA oxygen production equipment， an Ω-shaped step radial flow adsorption bed was designed. Using Fluent 16.0 software， the change rule of the flow field， concentration field， oxygen production characteristics and bed penetration time of the adsorption bed were studied by numerical simulations， which were further compared with those in the traditional Π radial flow adsorption bed. The results showed that the penetration time of the Ω-shaped step radial flow adsorption bed is significantly longer than that of the Π-shaped one under the same conditions and the flow unevenness area is greatly reduced. Moreover， for the Ω-shaped bed， the O₂ molar fraction of the production gas can reach 91.8%， which is only 87.1% for the Π-shaped one. There is a great difference in the shape of the high molar fraction O₂ zone in the two types of adsorption beds during adsorption stage. The high molar fraction O₂ zone moves forward in a near cup shape in the Ω-shaped bed， while it becomes a long cone shape in the Π-shaped one.

Key words: pressure swing adsorption, PSA oxygen production, radial flow, adsorption bed, O₂ concentration

中图分类号:

TQ028.1

冯明杰，徐凤森，周帅磊. Ω形阶梯径向流变压吸附床制氧特性的数值模拟[J]. 东北大学学报:自然科学版, 2020, 41(4): 516-520.

FENG Ming-jie， XU Feng-sen， ZHOU Shuai-lei. Numerical Simulation of Oxygen Generation Characteristics of Ω-Shaped Step Radial Flow Pressure Swing Adsorbent Bed[J]. Journal of Northeastern University Natural Science, 2020, 41(4): 516-520.

参考文献

[1]祝显强，刘应书，杨雄，等.我国变压吸附制氧吸附剂及工艺研究进展［J］.化工进展，2015，34(1):19-25.(Zhu Xian-qiang，Liu Ying-shu，Yang Xiong，et al.Progress of modified adsorbent and pressure swing adsorption for oxygen production in China［J］.Chemical Industry and Engineering Progress，2015，34(1):19-25.)
[2]Ebrahimi A，Meratizaman M，Reyhani H A，et al.Energetic，exergetic and economic assessment of oxygen production from two columns cryogenic air separation unit［J］.Energy，2015，90(2):1298-1316.
[3]Zheng X G，Liu Y S，Liu W H.Two-dimensional modeling of the transport phenomena in the adsorber during pressure swing adsorption process［J］.Industrial & Engineering Chemistry Research，2010，49(22):11814-11824.
[4]Kwapinski W，Salem K，Mewes D，et al.Thermal and flow effects during adsorption in conventional，diluted and annular packed beds［J］.Chemical Engineering Science，2010，65(14):4250-4260.
[5]Chai S W，Kothare M V，Sircar S.Rapid pressure swing adsorption for reduction of bed size factor of a medical oxygen concentrator［J］.Industrial & Engineering Chemistry Research，2011，50(14):8703-8710.
[6]Yaghoobpour E，Ahmadpour A，Farhadian N，et al.Molecular dynamics simulation of carbon molecular sieve preparation for air separation［J］.Korean Journal of Chemical Engineering，2015，32(3):494-500
[7]Beeyani A K，Singh K，Vyas R K，et al.Parametric studies and simulation of PSA process for oxygen production from air［J］.Polish Journal of Chemical Technology，2010，12(2):18-28.
[8]Li Y，Si H Q，Wang B，et al.Optimization design research of air flow distribution in vertical radial flow adsorbers［J］.Korean Journal of Chemical Engineering，2018，35(4):835-846.
[9]Dai Z S，Yu M，Rui D Z，et al.Investigation on a vertical radial flow adsorber designed by a novel parallel connection method［J］.Chinese Journal of Chemical Engineering，2018，26(3):484-493.
[10]Moran A，Talu O.Role of pressure drop on rapid pressure swing adsorption performance［J］.Industrial & Engineering Chemistry Research，2017，56(19):5715-5723.
[11]Vemula R R，Kothare M V，Sircar S.Anatomy of a rapid pressure swing adsorption process performance［J］.Aiche Journal，2015，61(6):2008-2014.
[12]Launder B E，Spalding D E.The numerical computational of turbulent flow［J］.Computer Method in Applied Mechanics and Engineering，1973(3):267-271.
[15]关守平，房少纯.一种新型的区间-粒子群优化算法［J］.东北大学学报(自然科学版)，2012，33(10):1381-1384.(Guan Shou-ping，Fang Shao-chun.A new interval particle swarm optimization algorithm［J］.Journal of Northeastern University(Natural Science)，2012，33(10):1381-1384.)

Ω形阶梯径向流变压吸附床制氧特性的数值模拟

Numerical Simulation of Oxygen Generation Characteristics of Ω-Shaped Step Radial Flow Pressure Swing Adsorbent Bed

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics

本文评价

[1]	王坤，刘燕，侯君洋，张廷安. 镁蒸气铁水脱硫气液反应过程水模型研究[J]. 东北大学学报:自然科学版, 2018, 39(12): 1727-1731.
[2]	王坤，刘燕，张廷安. 底吹-机械搅拌耦合铁水脱硫的模拟[J]. 东北大学学报:自然科学版, 2018, 39(6): 818-822.