岩体裂隙区全长黏结锚杆应变测试方法

doi:10.12068/j.issn.1005-3026.2021.01.020

东北大学学报（自然科学版） ›› 2021, Vol. 42 ›› Issue (1): 131-138.DOI: 10.12068/j.issn.1005-3026.2021.01.020

岩体裂隙区全长黏结锚杆应变测试方法

韩滔¹，金长宇¹，鲁宇¹，刘冬²

(1.东北大学资源与土木工程学院，辽宁沈阳110819; 2.汕头大学工学院，广东汕头515063)

出版日期:2021-01-15 发布日期:2021-01-13
通讯作者: 韩滔
作者简介:韩滔(1993-)，男，内蒙古赤峰人，东北大学博士研究生；金长宇(1979-)，男，辽宁鞍山人，东北大学教授.
基金资助:
中央高校基本科研业务费专项资金资助项目(N170104025)；汕头大学科研启动基金资助项目(NTF19008)；广东省基础与应用基础研究基金资助项目(2020A1515011398).

Strain Measurement Method of Fully-Grouted Rock Bolt in Rock Mass Fractured Zone

HAN Tao¹， JIN Chang-yu¹， LU Yu¹， LIU Dong²

1. School of Resources & Civil Engineering， Northeastern University， Shenyang 110819， China; 2. College of Engineering， Shantou University， Shantou 515063， China.

Online:2021-01-15 Published:2021-01-13
Contact: LIU Dong
About author:-
Supported by:
-

摘要/Abstract

摘要： 受到裂隙岩体非连续变形以及全长黏结锚杆与黏结剂间复杂剪切作用的影响，裂隙区域的锚杆应变量值一直难以准确测量.通过3D打印制备全长黏结锚杆，并在杆体内、外侧分别粘贴应变片，利用单轴压缩试验获得了裂隙开裂过程全长黏结锚杆拉应变的演化规律.研究发现，外侧的应变片受黏结剂剪切变形影响较大，且当黏结剂塑性变形能力较强时，其测试结果易失真.而内部的应变片能准确获得杆体应变的全过程曲线.最后利用FLAC软件模拟裂隙处锚杆失效过程，验证了应变片不同粘贴方式对测试结果的影响，也进一步证明了杆体内粘贴应变片测试方法的可行性.

关键词: 岩体；裂隙；锚杆；应变；测试方法

Abstract: Due to the effects of discontinuous deformation in fractured rock masses and complex shearing between the rock bolt and the grout， the strain of rock bolt in fractured zone can hardly be measured accurately. A fully-grouted rock bolt was prepared by using 3D printing， and strain gauges were installed inside and outside the bolt respectively. The evolution law of tensile strain in the fully-grouted rock bolt during the fracture propagation process was obtained by uniaxial compression test. It was found that the outer strain gauges were greatly affected by the shear deformation of the grout， and the measurement results are easy to be distorted when the plastic deformation capacity of the grout is high. However， the internal strain gauges could accurately obtain the complete strain of bolt. Finally， the failure process of rock bolt in fractured zone was numerically simulated by FLAC software， the influence of strain gauge location on the measurement results was verified， which further proved the reliability of measurement by strain gauges inside the rock bolt.

Key words: rock mass; fracture; rock bolt; strain; measurement method

中图分类号:

TU45

韩滔，金长宇，鲁宇，刘冬. 岩体裂隙区全长黏结锚杆应变测试方法[J]. 东北大学学报（自然科学版）, 2021, 42(1): 131-138.

HAN Tao， JIN Chang-yu， LU Yu， LIU Dong. Strain Measurement Method of Fully-Grouted Rock Bolt in Rock Mass Fractured Zone[J]. Journal of Northeastern University(Natural Science), 2021, 42(1): 131-138.

参考文献

[1]He L，An X M，Zhao Z Y.Fully grouted rock bolts: an analytical investigation［J］.Rock Mechanics and Rock Engineering，2015，48(3):1181-1196.
[2]Feng X W，Zhang N，He F Z，et al.Implementation of a pretensioned，fully bonded bolting system and its failure mechanism based on acoustic emission: a laboratorial and field study［J］.Geotechnical Testing Journal，2017，40(6):978-999.
[3]Jarred D J，Haberfield C M.Tendon/grout interface performance in grouted anchors［C］//Proceedings of Ground Anchorages and Anchored Structures.London，1997: 3-12.
[4]荣冠，朱焕春，周创兵.螺纹钢与圆钢锚杆工作机理对比试验研究［J］.岩石力学与工程学报，2004，24(3):469-475. (Rong Guan，Zhu Huan-chun，Zhou Chuang-bing.Testing study on working mechanism of fully grouted bolts of thread steel and smooth steel［J］.Chinese Journal of Rock Mechanics and Engineering，2004，24(3):469-475.)
[5]Martin L B，Tijani M，Hadj-Hassen F.A new analytical solution to the mechanical behaviour of fully grouted rockbolts subjected to pull-out tests［J］.Construction and Building Materials，2011，25(2):749-755.
[6]Yu C.Experimental study and stress analysis of rock bolt anchorage performance［J］.Journal of Rock Mechanics and Geotechnical Engineering，2014，6(5):428-437.
[7]Teymen A，Kilic A.Effect of grout strength on the stress distribution (tensile) of fully-grouted rockbolts［J］.Tunnelling and Underground Space Technology，2018，77: 280-287.
[8]林传年，刘泉声，高玮，等.光纤传感技术在锚杆轴力监测中的应用［J］.岩土力学，2008，29(11):3161-3164.(Lin Chuan-nian，Liu Quan-sheng，Gao Wei，et al.Application of fiber optical sensing technology to monitoring axial forces of anchor bolts［J］.Rock and Soil Mechanics，2008，29(11):3161-3164.)
[9] Jing H W，Yang S Q，Zhang M L，et al.An experimental study on anchorage strength and deformation behavior of large-scale jointed rock mass［J］.Tunnelling and Underground Space Technology，2014，43:184-197.
[10]Forbes B，Vlachopoulos N，Hyett A J，et al.A new optical sensing technique for monitoring shear of rock bolts［J］.Tunnelling and Underground Space Technology，2017，66: 34-46.
[11]Chai J，Liu Q，Liu J X，et al.Assessing the difference in measuring bolt stress: a comparison of two optical fiber sensing techniques［J］.Journal of Sensors，2018，2018: 1-11.
[12]Yang Z Y，Chen J M，Huang T H.Effect of joint sets on the strength and deformation of rock mass models［J］.International Journal of Rock Mechanics and Mining Sciences，1998，35(1):75-84.
[13]周辉，徐荣超，卢景景，等.深埋隧洞板裂化围岩预应力锚杆锚固效应试验研究及机制分析［J］.岩石力学与工程学报，2015，34(6):1081-1090.(Zhou Hui，Xu Rong-chao，Lu Jing-jing，et al.Experimental investigations and mechanism analysis of anchoring effect of pre-stressed bolts for slabbing surrounding rock in deep tunnel［J］.Chinese Journal of Rock Mechanics and Engineering，2015，34(6):1081-1090.)
[14]Jin C Y，Shao A L，Liu D，et al.Failure mechanism of highly stressed rock mass during unloading based on the stress arch theory［J］.International Journal of Geomechanics，2018，18(11):1-10.
[15]Kilic A，Yasar E，Celik A G.Effect of grout properties on the pull-out load capacity of fully grouted rock bolt［J］.Tunnelling and Underground Space Technology，2002，17(4):355-362.
[16]Sitharam T G，Maji V B，Verma A K.Practical equivalent continuum model for simulation of jointed rock mass using FLAC^3D［J］.International Journal of Geomechanics，2007，7(5):389-395.
[17]Jin C Y，Yang C X，Fang D，et al.Study on the failure mechanism of basalts with columnar joints in the unloading process on the basis of an experimental cavity［J］.Rock Mechanics and Rock Engineering，2015，48(3):1275-1288.

岩体裂隙区全长黏结锚杆应变测试方法

Strain Measurement Method of Fully-Grouted Rock Bolt in Rock Mass Fractured Zone

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	贾蓬，李博，祝鹏程，王琦伟. 单轴受压高温损伤砂岩的电学响应特征[J]. 东北大学学报（自然科学版）, 2023, 44(4): 558-564.
[2]	康玉梅，谷今，魏梦琦. 不同加载速率下软硬互层类岩石力学及声发射特性[J]. 东北大学学报（自然科学版）, 2023, 44(3): 399-407.
[3]	纪洪广，陈东升，苏晓波，权道路. 基于三轴加卸载试验的花岗岩弹性模量变异与能量演化分析[J]. 东北大学学报（自然科学版）, 2023, 44(3): 415-423.
[4]	王述红，朱宝强，张泽. 基于改进理想点模型的岩体结构面分级方法[J]. 东北大学学报（自然科学版）, 2021, 42(1): 117-123.
[5]	李光，马凤山，郭捷，赵海军. 大尺寸工程模型试验中的相似材料配比试验研究[J]. 东北大学学报:自然科学版, 2020, 41(11): 1653-1660.
[6]	王述红，朱宝强，王鹏宇. 模拟退火聚类算法在结构面产状分组中的应用[J]. 东北大学学报:自然科学版, 2020, 41(9): 1328-1333.
[7]	付腾飞，徐涛，朱万成，王兴伟. 基于多晶离散元法的砂岩三轴压缩损伤特性[J]. 东北大学学报:自然科学版, 2020, 41(7): 968-974.
[8]	王鹏宇，朱承金，王述红，姚骞. 预制管廊横向接头抗弯力学模型及取值方法[J]. 东北大学学报:自然科学版, 2020, 41(5): 629-634.
[9]	张泽，王述红，杨天娇，张雨浓. 寒区隧道围岩水热耦合数值分析[J]. 东北大学学报:自然科学版, 2020, 41(5): 635-641.
[10]	朱承金，王述红，任艺鹏，孙子涵. 无人机摄影测量边坡结构面及块体稳定分析[J]. 东北大学学报:自然科学版, 2019, 40(11): 1636-1641.
[11]	贾蓬，张瑶，刘冬桥，张亚兵. 真三轴条件下单裂隙砂岩破坏过程的颗粒流模拟[J]. 东北大学学报:自然科学版, 2019, 40(11): 1654-1659.
[12]	杨天娇，王述红，张泽，高钰. 寒区隧道围岩水热力耦合数值分析[J]. 东北大学学报:自然科学版, 2019, 40(8): 1178-1184.
[13]	王鹏宇，王述红，朱承金. 城市地下管廊结构地震动力响应分析[J]. 东北大学学报:自然科学版, 2019, 40(7): 1020-1027.
[14]	王述红，邱伟，高红岩，张紫杉. 数值流形位移法在岩体裂缝扩展中的应用[J]. 东北大学学报:自然科学版, 2019, 40(4): 552-556.
[15]	王述红，任艺鹏，陈俊智，张紫杉. 一种改进鱼群聚类算法在结构面分组中的应用[J]. 东北大学学报:自然科学版, 2019, 40(3): 420-424.