东北大学学报(自然科学版) ›› 2011, Vol. 32 ›› Issue (2): 258-261.DOI: -

• 论著 • 上一篇    下一篇

脉冲磁场下电磁力特性研究:凝固实验

华骏山;张永杰;王恩刚;赫冀成;   

  1. 东北大学材料电磁过程教育部重点实验室;宝钢研究院;
  • 收稿日期:2013-06-19 修回日期:2013-06-19 发布日期:2013-04-04
  • 通讯作者: -
  • 作者简介:-
  • 基金资助:
    国家高技术研究发展计划项目(2001AA337040);;

On the characteristics of pulsed electromagnetic force: Solidification experiment

Hua, Jun-Shan (1); Zhang, Yong-Jie (1); Wang, En-Gang (1); He, Ji-Cheng (1)   

  1. (1) Key Laboratory of Electromagnetic Processing of Materials, Ministry of Education, Northeastern University, Shenyang 110819, China; (2) Baosteel Research Institute, Shanghai 201900, China
  • Received:2013-06-19 Revised:2013-06-19 Published:2013-04-04
  • Contact: Hua, J.-S.
  • About author:-
  • Supported by:
    -

摘要: 采用低熔点金属伍德合金研究了工频脉冲磁场对金属液面波动行为的影响规律:工频脉冲磁场的周向电磁力搅拌熔体使其形成环状涡流;而径向电磁力在其表现为压力作用时使熔体在中心形成圆形液柱,表现为拉力作用时使熔体在中心形成圆形漩涡.另外,采用Sn-20%Pb合金研究了工频脉冲磁场对铸坯质量的影响:工频脉冲磁场的作用不仅使Sn-Pb合金的微观组织明显细化,而且使铸坯的表面质量得到明显改善.在本实验条件下,当脉冲放电频率为3.9和6.6 Hz时,金属熔体的液面发生共振运动,加速了熔体内的流动,从而增强了脉冲磁场的细化效果.

关键词: 脉冲磁场, 电磁力, 晶粒细化, 表面质量

Abstract: With the low-melting-point Wood's metal used, how the PMF (pulsed magnetic field) affects the fluctuation behavior of melt meniscus in PMF was investigated, where the melt was stirred with the peripheral electromagnetic force to form a vertex, while the radial electromagnetic force formed a liquid cylinder and vertex at the central part of melt if the force played a role of compression and tension, respectively. Moreover, the Sn-20wt% Pb alloy was applied to investigating the effect of the PMF on the quality of billet. The results showed that the microstructure of the alloy is obviously refined with the surface quality of billet improved greatly. Also, under the experimental conditions, when the pulsed discharge frequency is 3.9 or 6.6 Hz, a resonance occurs on the surface of molten metal so as to accelerate the flowability in the melt, thus enhancing the grain refining effect of the PMF.

中图分类号: