东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2010, Vol. 31 ›› Issue (10): 1421-1423+1428.DOI: -

• 论著 • 上一篇    下一篇

单机架可逆轧机板形测控系统的研究与设计

刘佳伟;张殿华;王鹏飞;王军生;   

  1. 东北大学轧制技术及连轧自动化国家重点实验室;鞍山钢铁集团公司鞍钢股份有限公司;
  • 收稿日期:2013-06-20 修回日期:2013-06-20 出版日期:2010-10-15 发布日期:2013-06-20
  • 通讯作者: -
  • 作者简介:-
  • 基金资助:
    国家自然科学基金重点资助项目(50534020)

Research and design of flatness control system of single-stand reversing cold mill

Liu, Jia-Wei (1); Zhang, Dian-Hua (1); Wang, Peng-Fei (1); Wang, Jun-Sheng (2)   

  1. (1) The State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, China; (2) Ansteel Company Limited, Anshan Iron and Steel Group Corporation, Anshan 114001, China
  • Received:2013-06-20 Revised:2013-06-20 Online:2010-10-15 Published:2013-06-20
  • Contact: Liu, J.-W.
  • About author:-
  • Supported by:
    -

RichHTML

0

PDF (PC)

532

摘要： 为提高鞍钢单机架可逆轧机板形控制系统的自动化水平和产品板形的控制精度,设计开发了采用国产压磁式冷带轧机板形仪的板形测控系统.对该板形测控系统的结构、原理及实现予以详细介绍.针对该轧制板形控制的特点,利用板形功效系数对板形自动控制系统模型进行设计.研究结果表明,利用功效系数方法可以调高板形控制系统的精度.通过板形在线检测系统的投入,使被轧带材板形质量有了较大程度的提高,板形偏差控制在±50μm/m.

关键词: 板形, 自动控制系统, 功效系数, 冷轧

Abstract: To upgrade the automatic control of flatness of strip, a relevant control system was designed and developed for the signal-stand reversing cold mill in Ansteel, with a domestic magnetic-pressure flatness meter used for cold-rolled strip. The structure, operating principle and implementation of the flatness control system were described in detail. In the design of the control system the efficiency factor of flatness was introduced to develop the control model, and efficiency factor of flatness can serve the function of improving the control accuracy of strip shape. With the online flatness control system applied to the detection of the strip as the products from a reversing cold mill, the flatness error is available to be controlled within ±50 μm/m.

中图分类号: