东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2012, Vol. 33 ›› Issue (12): 1762-1765.DOI: -

• 论著 • 上一篇    下一篇

柴油机曲轴连杆组合结构动态特性分析

孙丽娜;李沈;花纯利;刘颖;   

  1. 东北大学机械工程与自动化学院;
  • 收稿日期:2013-06-19 修回日期:2013-06-19 发布日期:2013-04-04
  • 通讯作者: -
  • 作者简介:-
  • 基金资助:
    国家重点基础研究发展计划项目子课题(1103401)

Dynamic characteristics of crankshaft-connecting rod of diesel engine

Sun, Li-Na (1); Li, Shen (1); Hua, Chun-Li (1); Liu, Ying (1)   

  1. (1) School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110819, China
  • Received:2013-06-19 Revised:2013-06-19 Published:2013-04-04
  • Contact: Sun, L.-N.
  • About author:-
  • Supported by:
    -

RichHTML

0

PDF (PC)

613

摘要： 以康明斯6BT5.9柴油机曲轴连杆组合结构为研究对象,采用试验模态分析和有限元理论分析相结合的方法得到其动态特性,进而改善动力性能,降低振动强度,优化结构设计.在进行有限元理论分析时,分别采用耦合自由度法、弹簧-阻尼单元联接法、虚拟材料法模拟曲轴连杆的边界联接方式.对试验模态分析法与理论模态分析法所得到的模态参数采用频率准则进行相关性分析,可以看出弹簧-阻尼单元联接法、虚拟材料法得到的计算值与试验值相关性更高,即这两种方法在结合面接触处理上更合理,为柴油机整机动态分析及优化设计提供了理论依据.

关键词: 柴油发动机, 动态特性, 有限元法, 曲轴连杆, 虚拟材料

Abstract: The dynamic characteristics of crankshaft-connecting rod of the Cummins 6BT5.9 diesel engine were studied using a combined method of experimental modal and finite element analysis to optimize the dynamic performance, intensity of vibration and structure design. In the finite element analysis, the boundary conditions of combined structure were simulated by methods of coupled degrees of freedom, spring-damper unit connection and virtual material, respectively. Frequency criteria was then used to investigate the correlation analysis of the modal parameters obtained. It shows that the correlation between the calculated and experimental parameters by spring-damper unit connection and virtual material method is higher, which are more reasonable in dealing with the joint surface contact. It provides a theoretical basis for dynamic analysis and optimization design of diesel engine.

中图分类号: