东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2013, Vol. 34 ›› Issue (9): 1248-1251.DOI: -

• 材料与冶金 • 上一篇    下一篇

合金凝固过程中晶粒尺寸和形貌演变的预测

周志敏1，王娜1,2，李勇3，管曙荣2   

  1. (1.东北大学理学院，辽宁沈阳110819；2.上海宝钢集团公司，上海200002；3.焦作万方铝业股份有限公司，河南焦作454150)
  • 收稿日期:2013-03-25 修回日期:2013-03-25 出版日期:2013-09-15 发布日期:2013-04-22
  • 通讯作者: 周志敏
  • 作者简介:周志敏(1964-)，男，河南伊川人，东北大学教授.
  • 基金资助:
    国家自然科学基金重点资助项目(51034002).

Prediction of the Grain Size and the Morphology Evolution of Alloys in Solidification Process

ZHOU Zhimin1， WANG Na1,2， LI Yong3， GUAN Shurong2   

  1. 1. School of Sciences， Northeastern University， Shenyang 110819， China; 2. Bao Steel Group Corporation， Shanghai 200002， China; 3. Jiaozuo Wanfang Aluminum Manufacturing Co.Ltd.， Jiaozuo 454150， China.
  • Received:2013-03-25 Revised:2013-03-25 Online:2013-09-15 Published:2013-04-22
  • Contact: ZHOU Zhimin
  • About author:-
  • Supported by:
    -

RichHTML

0

PDF (PC)

1229

摘要： 利用合金凝固热力学原理，考虑形核和长大因素，建立了预测晶粒尺寸的理论模型，利用该模型对近液相线半连续铸造6061铝合金的晶粒大小进行了计算，所得结果与实验吻合.在所计算的几个条件中，最大误差小于7μm.通过对凝固过程中液固界面法向生长的扰动分析，得出球形晶粒周边主导波长及对应于一定波数的临界晶粒直径表达式.利用此关系可以很好地解释球晶生长及其向一定形貌的枝晶转变的条件及机理；对于分析凝固组织中不同形貌晶粒的形成及演化具有参考价值；对于半固态合金组织性能预测及其制备工艺优化具有实际意义.

关键词: 半固态成形, 近液相线半连续铸造, 微观组织预测, 晶粒尺寸, 晶粒形貌

Abstract: A theoretical model on the grain size prediction was established according to the thermodynamics of the alloy solidification and consideration on the factors of the nucleation and grain growth. The grain size of the near liquidus semicontinuous casting 6061 aluminum alloy was calculated by using the model. The calculated results are well consistent with the experimental ones with the maximum error less than 7μm. Through the analysis of the growing disturbance along the normal direction to the liquidsolid interface during the solidification， a equation of the critical grain diameter corresponding to a certain wave number and the dominant wavelength surround the spherical grains were obtained. The spherical grain growth and its transformation conditions and mechanism of dendritic grains with specific type were well explained by these expressions， which is of great significance to the study on the formation and evolution of the grains with different morphologies， and to the prediction of microstructures and properties of semisolid alloy as well as the processing optimization.

Key words: semisolid forming, near liquidus semicontinuous casting, microstructural prediction, grain size, grain morphology

中图分类号: