东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2012, Vol. 33 ›› Issue (6): 848-851.DOI: -

• 论著 • 上一篇    下一篇

COREX-3000竖炉炉顶布料过程的DEM仿真

李强;刘栋梁;张丽娟;邹宗树;   

  1. 东北大学材料与冶金学院;宝山钢铁股份有限公司;
  • 收稿日期:2013-06-19 修回日期:2013-06-19 发布日期:2013-04-04
  • 通讯作者: -
  • 作者简介:-
  • 基金资助:
    国家科技支撑计划项目(2011BAE04B01,2011BAE04B02);;

Simulation of burden charging for COREX-3000 shaft by discrete element method

Li, Qiang (1); Liu, Dong-Liang (1); Zhang, Li-Juan (1); Zou, Zong-Shu (1)   

  1. (1) School of Materials and Metallurgy, Northeastern University, Shenyang 110819, China; (2) Baoshan Iron and Steel Co. Ltd., Shanghai 200941, China
  • Received:2013-06-19 Revised:2013-06-19 Published:2013-04-04
  • Contact: Li, Q.
  • About author:-
  • Supported by:
    -

RichHTML

0

PDF (PC)

727

摘要： COREX-3000预还原竖炉内的煤气流分布直接影响着煤气利用率、直接还原铁的金属化率和炉料顺行,而炉顶布料制度是调节煤气流分布的主要手段.基于离散颗粒动力学原理,建立COREX-3000竖炉布料的DEM数值模型,确定了模型参数,并对布料过程中的颗粒速度变化和颗粒分布情况,以及形成料堆的料面形状和料堆结构进行了颗粒尺度的分析.模拟结果表明混装布料时,粒径小、密度大的矿物颗粒易于穿过表层的大粒径、密度小的燃料颗粒层,从而表现出在料堆的表层大颗粒富集.

关键词: COREX-3000, 竖炉, 布料, 离散单元法, 料堆形状

Abstract: The distribution of reducing gas in the shaft furnace of COREX-3000 influences directly the gas utilization ratio, the metallization degree of directly reduced iron and the burden descent. The charging of burden is the main means for regulating the gas flow distribution. A mathematical simulation model of burden distribution for COREX-3000 shaft was developed by discrete element method, and the model parameters were determined. The change of particles velocity and particles distribution in the process of burden charging, as well as the surface profile and inner structure of the bed, were analyzed at particulate-scale. The simulation results show that the small radius, heavy mineral particles tend to go through the surface layer consisted of the light and large size of fuel particles, thus it seems to make large particles enriched in the surface of heap.

中图分类号: