东北大学学报（自然科学版）

东北大学学报:自然科学版 ›› 2016, Vol. 37 ›› Issue (1): 79-84.DOI: 10.12068/j.issn.1005-3026.2016.01.017

• 资源与土木工程 • 上一篇    下一篇

露天矿多采区受约束条件下全境界优化

胥孝川1， 顾晓薇1， 王青 1， 刘剑平1,2   

  1. (1. 东北大学 资源与土木工程学院， 辽宁 沈阳110819； 2. 东煤沈阳基础工程公司， 辽宁 沈阳110016)
  • 收稿日期:2014-11-20 修回日期:2014-11-20 出版日期:2016-01-15 发布日期:2016-01-08
  • 通讯作者: 胥孝川
  • 作者简介:胥孝川(1986-)，男，四川绵阳人，东北大学博士研究生； 顾晓薇(1971-)，女，辽宁凤城人，东北大学教授，博士生导师; 王青(1962-)，男，内蒙古兴和人，东北大学教授，博士生导师.
  • 基金资助:
    国家自然科学基金资助项目(51474049)； 辽宁省自然科学基金资助项目(2014020040)； 辽宁省教育厅重点实验室基础研究项目(LZ2014020)； 沈阳市科技计划项目(F14-231-1-07).

Optimizing the Whole Boundary of Open Pit Mining Areas with Restrictions

XU Xiao-chuan1， GU Xiao-wei1， WANG Qing1， LIU Jian-ping1,2   

  1. 1. School of Resources & Civil Engineering， Northeastern University， Shenyang 110819， China； 2. Eastern Coal-Based Engineering Company in Shenyang， Shenyang 110016， China.
  • Received:2014-11-20 Revised:2014-11-20 Online:2016-01-15 Published:2016-01-08
  • Contact: GU Xiao-wei
  • About author:-
  • Supported by:
    -

RichHTML

0

PDF (PC)

667

摘要： 基于浮锥排除法基本原理，使用Smart Miner 软件对两露天采场进行全境界优化，将两个不同生产条件的采场合为一个矿区.考虑到不同采区生产技术经济参数不一样，而境界优化结果对这些参数的敏感度较高，所以软件增加了优化中识别开采对象所在分区，按所属分区的技术经济参数进行优化的功能；同时采场开采范围受地表构筑物影响，因此软件新增在任何约束范围进行境界优化功能.以司家营露天矿区为例分别在有约束和无约束条件下根据分区参数进行优化.结果表明，地表构筑物对最佳境界的约束“很硬”，由此少采1亿t矿，且在-202m水平开始形成挂帮矿；如果这1亿t矿仍然露天开采，那么地表构筑物移除费用必须小于3.4亿元.

关键词: 境界优化, 浮锥法, 露天矿, 利润值, 模型

Abstract: Based on the theory of floating cone exclusive method， the ultimate boundary of two open pits in different producing conditions was optimized together by Smart Miner software. In view of the technical and economic parameters being different in open pits and the optimization results being sensitive to these parameters， the software incorporated some functions to indentify the partitions of mining objects and optimized the boundary by the corresponding parameters in each partition. Meanwhile， the software incorporated the function of optimizing boundary in any constraint ranges for the mining range being restricted by the surface structures. Taking Sijiaying open pit as an example， the ultimate boundary was optimized with restrictions and non-restrictions according to the parameters in different partitions. The results showed that the surface structures which caused 0.1 billion ore loss were a strong constraint to the optimum boundary. The 0.1 billion ores formed hanging wall ores from -202m level. If the hanging wall ores were still mined opening， the cost of moving surface structures must be less than 0.34 billion.

Key words: boundary optimization, floating cone method, open pit mine, profit value, model

中图分类号: