Fabrication of Ultrafine-Grained Gradient Cemented Carbide by SPS Pre-sintered Method
XU Zhi-feng1， ZHOU Xiang-kui2， WANG Kai1， WANG Qiang1
1. Key Laboratory of Electromagnetic Processing of Materials， Ministry of Education， Northeastern University， Shenyang 110819， China; 2. Mechanical and Electrical Engineering Institute， Zhengzhou University of Light Industry， Zhengzhou 450002， China.
XU Zhi-feng， ZHOU Xiang-kui， WANG Kai， WANG Qiang. Fabrication of Ultrafine-Grained Gradient Cemented Carbide by SPS Pre-sintered Method[J]. Journal of Northeastern University Natural Science, 2018, 39(11): 1593-1597.
[1]Suzuki H，Hayashi K，Taniguchi Y.The β-free layer formed near the surface of vacuum-sintered WC-β-Co alloys containing nitrogen［J］.Transactions of the Japan Institute of Metals，1981，22(11):758-764. [2]Andrén H O.Microstructure development during sintering and heat-treatment of cemented carbides and cermets［J］.Materials Chemistry and Physice，2001，67(1):209-213. [3]Lengauer W，Dreyer K.Functionally graded hardmetals［J］.Journal of Alloys and Compounds，2002，338:194-211. [4]Konyashina I，Ries B.Wear damage of cemented carbides with different combinations of WC mean grain size and Co content.part I:ASTM wear tests［J］.International Journal of Refractory Metals and Hard Materials，2014，46:12-19. [5]Ekroth M，Frykholm R，Lindholm M，et al.Gradient zones in WC-Ti(C，N)-Co-based cemented carbides:experimental study and computer simulations［J］.Acta Material，2000，48(9):2177-2185. [6]Schwarzkopf M，Exner H E，Fischmeister H F，et al.Kinetics of compositional modification of(W，Ti)C-WC-Co alloy surfaces［J］.Material Science Engineering A，1988，105/106:225-231. [7]Gustafson P，Ostlund A.Binder-phase enrichment by dissolution of cubic carbides［J］.International Journal of Refractory Metals and Hard Materials，1994，12(3):129-136. [8]Frykholm R，Ekroth M，Jansson B，et al.A new labyrinth factor for modelling the effect of binder volume fraction on gradient sintering of cemented carbides［J］.Acta Materialia，2003，51(4):1115-1121. [9]Azcona I，Ordóez A，Sánchez J M，et al.Hot isostatic pressing of ultrafine tungsten carbide-cobalt hardmetals［J］.Journal of Materials Science，2002，37(19):4189-4195. [10]Breval E，Cheng J P，Agrawal D K，et al.Comparison between microwave and conventional sintering of WC/Co composites［J］.Materials Science and Engineering A，2005，391(1/2):285-295. [11]Sivaprahasam D，Chandrasekar S B，Sundaresan R R.Microstructure and mechanical properties of nanocrystalline WC-12Co consolidated by spark plasma sintering［J］.International Journal of Refractory Metals and Hard Materials，2007，25:144-152. [12]Bauer R E.Sinter-HIP furnaces sintering and compacting in a combined cycle［J］.Modern Developments in Powder Metallurgy，1988，18(6):5-10. [13]Frykholm R，Andrén H O.Development of the microstructure during gradient sintering of a cemented carbide［J］.Materials Chemistry and Physics，2001，67(1):203-208. [14]Chen W M，Xie W，Zhang L J，et al.Diffusion-controlled growth of fcc-free surface layers on cemented carbides:experimental measurements coupled with computer simulation［J］.International Journal of Refractory Metals and Hard Materials，2013，41:531-539.
