Journal of Northeastern University(Natural Science)

Journal of Northeastern University ›› 2005, Vol. 26 ›› Issue (10): 979-981.DOI: -

• OriginalPaper • Previous Articles     Next Articles

Rolling technology of fine-grain grade III bars with plain carbon steel

Wang, Xiao-Wen (1); Zhao, De-Wen (1); Liu, Xiang-Hua (1); Wang, Guo-Dong (1)   

  1. (1) Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, China
  • Received:2013-06-24 Revised:2013-06-24 Online:2005-10-15 Published:2013-06-24
  • Contact: Wang, X.-W.
  • About author:-
  • Supported by:
    -

RichHTML

0

PDF (PC)

706

Abstract: 400 MPa hot-rolled ribbed bars in diameters from 6 mm to 10 mm were produced with plain carbon steel through controlled rolling and controlled cooling adjusting the billets' chemical composition. The technological investigation showed that it is fully attainable to produce Grade III bars meeting the National Standard GB1499-98 with plain carbon steel through comprehensive strengthening without adding any microalloy in the billets. The Grade III ribbed bars have been successfully produced up to over 3100 ton in steelworks in China using technology proposed.

CLC Number: