高锰TWIP钢热变形行为及应变补偿型本构方程的建立

doi:10.12068/j.issn.1005-3026.2021.03.004

东北大学学报（自然科学版） ›› 2021, Vol. 42 ›› Issue (3): 325-332.DOI: 10.12068/j.issn.1005-3026.2021.03.004

高锰TWIP钢热变形行为及应变补偿型本构方程的建立

陈勇¹，文光奇^2,3，张晓明¹，丁桦^2,3

(1. 东北大学轧制技术及连轧自动化国家重点实验室，辽宁沈阳110819; 2. 东北大学材料科学与工程学院，辽宁沈阳110819; 3. 辽宁省轻量化用关键金属结构材料制备重点实验室，辽宁沈阳110819)

收稿日期:2020-08-05 修回日期:2020-08-05 接受日期:2020-08-05 发布日期:2021-03-12
通讯作者: 陈勇
作者简介:陈勇(1989-)，男，河北唐山人，东北大学博士研究生；张晓明(1965-)，男，黑龙江青冈人，东北大学教授，博士生导师；丁桦(1958-)，女，安徽合肥人，东北大学教授，博士生导师.
基金资助:
国家自然科学基金资助项目(51974084).

Hot Deformation Behavior of a High-Mn TWIP Steel and Establishment of Strain-Compensated Constitutive Equation

CHEN Yong¹， WEN Guang-qi^2,3， ZHANG Xiao-ming¹， DING Hua^2,3

1. State Key Laboratory of Rolling and Automation， Northeastern University， Shenyang 110819， China; 2. School of Materials Science & Engineering， Northeastern University， Shenyang 110819， China; 3. Key Laboratory of Lightweight Structural Materials， Liaoning Province， Shenyang 110819， China.

Received:2020-08-05 Revised:2020-08-05 Accepted:2020-08-05 Published:2021-03-12
Contact: ZHANG Xiao-ming
About author:-
Supported by:
-

摘要/Abstract

摘要： 对高锰TWIP钢进行不同温度(850~1100℃)和应变速率(0.01，0.1，1，5，10s^-1)的绝热压缩试验，研究试验钢高温热变形行为. 分析了变形温度和应变速率对流动特性的影响，建立了应变补偿型本构方程，并采用三种标准统计参数对应变补偿型本构方程的精确度进行了评估. 结果表明:流动应力对变形温度和应变速率的敏感程度很高，且随着变形温度的提高或应变速率的降低，流动应力呈下降趋势;应变速率对动态再结晶过程有着很复杂的影响;流动应力预测值与试验值具有较高的吻合度，表明建立的应变补偿型本构方程能够精确预测流动应力.

关键词: 高锰TWIP钢;热变形;流动特性;本构方程;应变补偿

Abstract: Hot deformation behaviors of a high-Mn twinning induced plasticity (TWIP) steel were investigated using isothermal hot compression tests at different temperature ranging from 850℃ to 1100℃ and constant strain rates of 0.01， 0.1， 1， 5 and 10s^-1， respectively. The effects of deformation temperature and strain rate on flow behavior were analyzed. A developed constitutive equation considering the strain compensation was established and its accuracy was evaluated based on three standard statistical parameters. The results indicate that the flow stress is strongly sensitive to deformation temperature and strain rate， which decreases with the increase in temperature or the decrease in strain rate. Strain rate has a complex influence on the kinetics of dynamic recrystallization. Since the predicted flow stress is in good agreement with the experimental one， it proves that the strain-compensated constitutive equation can estimate the flow stress accurately.

Key words: high-Mn TWIP steel; hot deformation; flow behavior; constitutive equation; strain compensation

中图分类号:

TG142.1

陈勇，文光奇，张晓明，丁桦. 高锰TWIP钢热变形行为及应变补偿型本构方程的建立[J]. 东北大学学报（自然科学版）, 2021, 42(3): 325-332.

CHEN Yong， WEN Guang-qi， ZHANG Xiao-ming， DING Hua. Hot Deformation Behavior of a High-Mn TWIP Steel and Establishment of Strain-Compensated Constitutive Equation[J]. Journal of Northeastern University(Natural Science), 2021, 42(3): 325-332.

参考文献

[1]Li Y，Lu Y F，Li W，et al.Hierarchical microstructure design of a bimodal grained twinning-induced plasticity steel with excellent cryogenic mechanical properties［J］.Acta Materialia，2018，158:79-94.
[2]Wang X J，Sun X J，Song C，et al.Enhancement of yield strength by chromium/nitrogen alloying in high-manganese cryogenic steel［J］.Materials Science & Engineering A，2017，698:110-116.
[3]Chen Y，Zhang X M，Cai Z H，et al.Effects of rolling temperature on the microstructure and mechanical properties of a high-Mn austenitic steel for cryogenic applications［J］.Steel Research International，2020，91(7):1900660.
[4]Chen J，Ren J K，Liu Z Y，et al.The essential role of niobium in high manganese austenitic steel for application in liquefied natural gas tanks［J］.Materials Science & Engineering A，2020，772:138733.
[5]Hamada A，Juuti T，Khosravifard A，et al.Effect of silicon on the hot deformation behavior of microalloyed TWIP-type stainless steels［J］.Materials & Design，2018，154:117-129.
[6]Li D J，Feng Y R，Yin Z F，et al.Prediction of hot deformation behaviour of Fe-25Mn-3Si-3Al TWIP steel［J］.Materials Science & Engineering A，2011，528(28):8084-8089.
[7]Li D Z，Wei Y H，Liu C Y，et al.Hot deformation behaviors of Fe-30Mn-3Si-3Al TWIP steel during compression at elevated temperature and strain rate［J］.Steel Research International，2013，84(8):740-750.
[8]Mejía I，Reyes-Calderón F，Cabrera J M.Modeling the hot flow behavior of a Fe-22Mn-0.41C-1.6Al-1.4Si TWIP steel microalloyed with Ti，V and Nb［J］.Materials Science & Engineering A，2015，644:374-385.
[9]Li D J，Bai Q，Feng Y R，et al.Influences of Nb-microalloying on the hot deformation behavior of Fe-25Mn-3Si-3Al TWIP steel［J］.Materials Research Express，2019，6(8):0865g6.
[10]Cai J，Li F G，Liu T Y，et al.Constitutive equations for elevated temperature flow stress of Ti-6Al-4V alloy considering the effect of strain［J］.Materials & Design，2011，32(3):1144-1151.
[11]Ji G L，Li F G，Li Q H，et al.A comparative study on Arrhenius-type constitutive model and artificial neural network model to predict high-temperature deformation behaviour in Aermet100 steel［J］.Materials Science & Engineering A，2011，528(13/14):4774-4782.
[12]Haghdadi N，Zarei-Hanzaki A，Abedi H R.The flow behavior modeling of cast A356 aluminum alloy at elevated temperatures considering the effect of strain［J］.Materials Science & Engineering A，2012，535:252-257.
[13]McQueen H J，Ryan N D.Constitutive analysis in hot working［J］.Materials Science & Engineering A，2002，322(1/2):43-63.
[14]Marandi A，Zarei-Hanzaki A，Haghdadi N，et al.The prediction of hot deformation behavior in Fe-21Mn-2.5Si-1.5Al transformation-twinning induced plasticity steel［J］.Materials Science & Engineering A，2012，554:72-78.
[15]Zener C，Hollomon J H.Effect of strain rate upon plastic flow of steel［J］.Journal of Applied Physics，1944，15(1):22-32.
[16]Medina S F，Hernandez C A.General expression of the Zener-Hollomon parameter as a function of the chemical composition of low alloy and microalloyed steels［J］.Acta Materialia， 1996，44(1):137-148.
[17]Sellars C M，Mctegart W J.On the mechanism of hot deformation［J］.Acta Metallurgica Sinica， 1966，14(9):1136-1138.
[18]Sellars C M，Mctegart W J.La relation entre la résistance et la structure dans la deformation à chaud［J］.Mémoires Scientifiques de la Revue de Metallurgie， 1966，63:731-746.(Sellars C M，Mctegart W J.The relationship between the resistance and the structure during hot deformation［J］.Scientific Papers of the Journal of Metallurgy，1966，63:731-746.)
[19]Jonas J J，Sellars C M，Mctegart W J.Strength and structure under hot-working conditions［J］.Revue De Metallurgie Cahiers Dinformations Techniques， 1969，14(1):1-24.
[20]Sellars C M，Mctegart W J.Hot workability［J］.International Metallurgical Reviews， 1972，17:1-24.
[21]Zhang J Q，Di H S，Wang X Y，et al.Constitutive analysis of the hot deformation behavior of Fe-23Mn-2Al-0.2C twinning induced plasticity steel in consideration of strain［J］.Materials & Design，2013，44:354-364.
[22]Hamada A S，Karjalainen L P，Somani M C.The influence of aluminum on hot deformation behavior and tensile properties of high-Mn TWIP steels［J］.Materials Science & Engineering A，2007，467(1/2):114-124.
[23]Cai J，Li F G，Liu T Y，et al.Constitutive equations for elevated temperature flow stress of Ti-6Al-4V alloy considering the effect of strain［J］.Materials & Design，2011，32(3):1144-1151.
[24]Changizian P，Zarei-Hanzaki A，Roostaei A A.The high temperature flow behavior modeling of AZ81 magnesium alloy considering strain effects［J］.Materials & Design，2012，39:384-389.

高锰TWIP钢热变形行为及应变补偿型本构方程的建立

Hot Deformation Behavior of a High-Mn TWIP Steel and Establishment of Strain-Compensated Constitutive Equation

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	周晓光，王铎，张东航，刘振宇. ESP工艺下低碳钢奥氏体演变行为[J]. 东北大学学报（自然科学版）, 2021, 42(1): 37-43.
[2]	王明明，高秀华，杜林秀，张大征. V-N微合金化X80抗大变形管线钢的组织与力学性能[J]. 东北大学学报:自然科学版, 2020, 41(6): 801-806.
[3]	辛博，周显新，巩亚东. 变厚度熔覆层沉积成形工艺与性能研究[J]. 东北大学学报:自然科学版, 2020, 41(3): 374-379.
[4]	张大征，高秀华，杜林秀，王鸿轩. 多级热处理对柔性立管用高强钢组织性能影响[J]. 东北大学学报:自然科学版, 2020, 41(1): 49-54.
[5]	董春宇，赵宪明，周晓光，赵景莉. 冷却工艺参数对海洋工程用H型钢组织性能的影响[J]. 东北大学学报:自然科学版, 2019, 40(4): 478-482.
[6]	王学强，赵金华，袁国，王国栋. 超快冷下X65管线钢微观组织演变及强化机制分析[J]. 东北大学学报:自然科学版, 2019, 40(3): 334-339.
[7]	吴俊宇，王斌，王丙兴，王昭东. 轧制道次间插入冷却对特厚钢板组织与性能的影响[J]. 东北大学学报:自然科学版, 2018, 39(11): 1582-1587.
[8]	周晓光，陈其源，刘振宇，吴思炜. Ti微合金化汽车大梁钢510L动态再结晶行为[J]. 东北大学学报:自然科学版, 2018, 39(5): 624-629.
[9]	王鹤松，袁国，曹光明，王国栋. 双辊薄带连铸低碳微合金钢的铸态组织[J]. 东北大学学报:自然科学版, 2018, 39(4): 497-500.
[10]	陈其源，周晓光，刘振宇，吴思炜. Ti微合金化汽车大梁钢510L的组织性能[J]. 东北大学学报:自然科学版, 2018, 39(3): 339-344.
[11]	宁方坤，贾伟涛，朱伏先，王平. P91厚壁钢管混晶组织分析[J]. 东北大学学报:自然科学版, 2018, 39(1): 50-55.
[12]	叶其斌，谢谦，刘振宇，王国栋. 超快冷工艺对钢板心部异常带状组织的抑制作用[J]. 东北大学学报:自然科学版, 2017, 38(12): 1696-1701.
[13]	周晓光，郭洪河，蒋小冬，刘振宇. Ti微合金化Q390高强钢热变形行为研究[J]. 东北大学学报:自然科学版, 2017, 38(12): 1702-1706.
[14]	李兴，陈礼清. 奥氏体化温度对Fe-17Mn-0.05C钢组织和拉伸性能的影响[J]. 东北大学学报:自然科学版, 2017, 38(8): 1084-1087.
[15]	利成宁，袁国，康健，王国栋. 异步热轧对低合金钢显微组织及力学性能的影响[J]. 东北大学学报:自然科学版, 2017, 38(7): 941-945.