V-N微合金化X80抗大变形管线钢的组织与力学性能

doi:10.12068/j.issn.1005-3026.2020.06.007

东北大学学报:自然科学版 ›› 2020, Vol. 41 ›› Issue (6): 801-806.DOI: 10.12068/j.issn.1005-3026.2020.06.007

V-N微合金化X80抗大变形管线钢的组织与力学性能

王明明，高秀华，杜林秀，张大征

(东北大学轧制技术及连轧自动化国家重点实验室，辽宁沈阳110819)

收稿日期:2019-11-20 修回日期:2019-11-20 出版日期:2020-06-15 发布日期:2020-06-12
通讯作者: 王明明
作者简介:王明明(1991-)，男，安徽阜阳人，东北大学博士研究生；高秀华(1966-)，女，河北唐山人，东北大学教授，博士生导师；杜林秀(1962-)，男，辽宁本溪人，东北大学教授，博士生导师.
基金资助:
国家高技术研究发展计划项目(2015AA03A501).

Microstructure and Mechanical Properties of V-N Microalloyed X80 High Deformability Pipeline Steel

WANG Ming-ming， GAO Xiu-hua， DU Lin-xiu， ZHANG Da-zheng

State Key Laboratory of Rolling and Automation， Northeastern University， Shenyang 110819， China.

Received:2019-11-20 Revised:2019-11-20 Online:2020-06-15 Published:2020-06-12
Contact: GAO Xiu-hua
About author:-
Supported by:
-

摘要/Abstract

摘要： 通过热模拟试验机研究了V-N微合金钢过冷奥氏体动态连续冷却相变行为，设计了V-N微合金化X80抗大变形管线钢的轧制与冷却工艺参数并分析了组织和力学性能的关系.结果表明，动态CCT曲线出现高温转变区和中温转变区分离的现象，转变温度范围分别是637~728℃和441~601℃，当冷速为10~20℃/s时，形成针状铁素体为主的组织.V-N微合金化管线钢组织以多边形铁素体和针状铁素体为主，屈服强度、抗拉强度、均匀延伸率和-20℃夏比冲击功分别为603MPa，724MPa，11.1%和214J，满足API Spec 5L对X80管线钢的力学性能要求，同时具有好的强塑性匹配.

关键词: V-N微合金化, 管线钢, 抗大变形, 显微组织, 力学性能

Abstract: The dynamic continuous cooling transformation behavior of undercooled austenite in a V-N microalloyed steel was studied by means of thermal simulation test machine. Furthermore， the rolling and cooling process parameters of V-N microalloyed X80 high deformability pipeline steel were designed and the relationship between microstructure and mechanical properties was analyzed. The dynamic CCT curve shows a separation of high temperature transformation region and intermediate temperature transformation region， and the transformation ranges are 637~728℃ and 441~601℃， respectively. When the cooling rate is in the range of 10~20℃/s， the microstructure mainly consists of acicular ferrite. The microstructure of V-N microalloyed pipeline steel is dominated bypolygonal ferrite and acicular ferrite. Yield strength， tensile strength， uniform elongation and -20℃ Charpy impact energy are 603MPa， 724MPa， 11.1% and 214J， respectively. These meet the requirements of X80 pipeline steels according to the API Spec 5L specification that the produced pipeline steel should have a good combination of strength and ductility.

Key words: V-N microalloying, pipeline steel, high deformability, microstructure, mechanical property

中图分类号:

TG142.1

王明明，高秀华，杜林秀，张大征. V-N微合金化X80抗大变形管线钢的组织与力学性能[J]. 东北大学学报:自然科学版, 2020, 41(6): 801-806.

WANG Ming-ming， GAO Xiu-hua， DU Lin-xiu， ZHANG Da-zheng. Microstructure and Mechanical Properties of V-N Microalloyed X80 High Deformability Pipeline Steel[J]. Journal of Northeastern University Natural Science, 2020, 41(6): 801-806.

参考文献

[1]Wang B X，Lian J B.Effect of microstructure on low-temperature toughness of a low carbon Nb-V-Ti microalloyed pipeline steel［J］.Materials Science and Engineering:A，2014，592:50-56.
[2]贾书君，刘清友，李拔.厚壁X70管线钢的组织和性能［J］.材料热处理学报，2016，37(4):129-134.(Jia Shu-jun，Liu Qing-you，Li Ba.Microstructure and mechanical properties of thick wall X70 pipeline steel［J］.Transactions of Materials and Heat Treatment，2016，37(4):129-134.)
[3]Wang S Y，Yu H，Zhou T，et al.Effects of non-recrystallization zone reduction on microstructure and precipitation behavior of a ferrite-bainite dual phase steel［J］.Materials and Design，2015，88:847-853.
[4]Hu J，Du L X，Xie H，et al.Microstructure and mechanical properties of TMCP heavy plate microalloyed steel［J］.Materials Science and Engineering:A， 2014，607:122-131.
[5]Turk A，Martín D S，Rivera-Díaz-del-Castillo P E J，et al.Correlation between vanadium carbide size and hydrogen trapping in ferritic steel［J］.Scripta Materialia，2018，152:112-116.
[6]Lagneborg R，Siwecki T，Zajac S，et al.The role of vanadium in microalloyed steels［J］.The Scandinavian Journal of Metallurgy，1999，28(5):186-241.
[7]Hu J，Du L X，Wang J J，et al.Structure-mechanical property relationship in low carbon microalloyed steel plate processed using controlled rolling and two-stage continuous cooling［J］.Materials Science and Engineering:A， 2013，585:197-204.
[8]Mukherjee S，Timokhina I，Zhu C，et al.Clustering and precipitation processes in a ferritic titanium-molybdenum microalloyed steel［J］.Journal of Alloys and Compounds，2017，690:621-632.
[9]Nayak S S，Misra R D K，Hartmann J，et al.Microstructure and properties of low manganese and niobium containing HIC pipeline steel［J］.Materials Science and Engineering:A，2008，494:456-463.
[10]Mazaheri Y，Kermanpur A，Najafizadeh A.A novel route for development of ultrahigh strength dual phase steels［J］.Materials Science and Engineering:A，2014，619:1-11.
[11]孟德亮，康永林，郑晓飞，等.两阶段控制冷却工艺对含钼X80抗大变形管线钢组织与性能的影响［J］.北京科技大学学报，2011，33(7):834-840.(Meng De-liang，Kang Yong-lin，Zheng Xiao-fei，et al.Effect of two-stage controlled cooling on the microstructure and properties of Mo-containing X80 high-deformability pipeline steel［J］.Journal of University of Science and Technology Beijing， 2011，33(7):834-840.)
[12]Olalla V C，Bliznuk V，Sanchez N，et al.Analysis of the strengthening mechanisms in pipeline steels as a function of the hot rolling parameters［J］.Materials Science and Engineering:A，2014，604:46-56.
[13]Deng W，Gao X H，Zhao D W，et al.Effect of Ti-enriched carbonitride on microstructure and mechanical properties of X80 pipeline steel［J］.Journal of Materials Science and Technology， 2010，26(9):803-809.
[14]Xiao F R，Liao B，Shan Y Y，et al.Challenge of mechanical properties of an acicular ferrite pipeline steel［J］.Materials Science and Engineering:A， 2006，431:41-52.
[15]康健，赵金华，王学强，等.超快冷下X70管线钢热轧工艺及显微组织［J］.东北大学学报(自然科学版)，2015，36(11):1576-1580.(Kang Jian，Zhao Jin-hua，Wang Xue-qiang，et al.Hot rolling process and microstructures of X70 pipeline steel under ultra-fast cooling［J］.Journal of Northeastern University (Natural Science)，2015，36(11):1576-1580.)
[16]于庆波，赵贤平，孙斌，等.高层建筑用钢板的屈强比［J］.钢铁，2007，42(11):74-78.(Yu Qing-bo，Zhao Xian-ping，Sun Bin，et al.Yield-strength ratio of steel plate for high-rise building［J］.Iron and Steel，2007，42(11):74-78.)
[15]关守平，房少纯.一种新型的区间-粒子群优化算法［J］.东北大学学报(自然科学版)，2012，33(10):1381-1384.(Guan Shou-ping，Fang Shao-chun.A new interval particle swarm optimization algorithm［J］.Journal of Northeastern University(Natural Science)，2012，33(10):1381-1384.)

V-N微合金化X80抗大变形管线钢的组织与力学性能

Microstructure and Mechanical Properties of V-N Microalloyed X80 High Deformability Pipeline Steel

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	邸洪双，柯浩鹏，张天宇. 多步热处理对含Cu中碳低合金钢组织与性能的影响[J]. 东北大学学报（自然科学版）, 2023, 44(3): 340-348.
[2]	左玉波，凌放，韩友，朱庆丰. 固溶后冷轧变形量对2195铝锂合金组织和力学性能的影响[J]. 东北大学学报（自然科学版）, 2023, 44(2): 199-205.
[3]	田妮，张耀中，周轶然，秦广华. Zr对Al-10Zn-2.5Mg-1.6Cu合金板材组织与性能的影响[J]. 东北大学学报（自然科学版）, 2022, 43(7): 951-958.
[4]	董艳伍，彭飞，田家龙，姜周华. 时效对10Ni10Mn2CuAl钢组织及性能的影响[J]. 东北大学学报（自然科学版）, 2022, 43(5): 646-651.
[5]	宋红宇，刘海涛，王国栋. 薄带连铸取向硅钢的热轧孪生行为[J]. 东北大学学报（自然科学版）, 2022, 43(2): 182-187.
[6]	赵宇辉，高孟秋，赵吉宾，贺晨. 增减材复合制造WC颗粒增强316L不锈钢材料组织性能[J]. 东北大学学报（自然科学版）, 2022, 43(2): 197-205.
[7]	王胤，李勇，钱晓明，张博四. 真空离心铸造冷却速率对7055铝合金组织和力学性能的影响[J]. 东北大学学报（自然科学版）, 2022, 43(12): 1769-1776.
[8]	张广泰，吴锐，李雪藩，阿迪力·赛买提. 老化-荷载作用下叠层轮胎隔震垫时变力学性能[J]. 东北大学学报（自然科学版）, 2021, 42(8): 1180-1186.
[9]	高彩茹，屈兵兵，田余东，杜林秀. 回火温度对在线淬火Q690q桥梁钢显微组织和力学性能的影响[J]. 东北大学学报（自然科学版）, 2021, 42(7): 927-933.
[10]	毕梦园，谢仁义，张艺凡，衣海龙. CoCrFeNi高熵合金组织演变规律及再结晶动力学[J]. 东北大学学报（自然科学版）, 2021, 42(7): 933-938.
[11]	朱成林，高秀华，王明明，宋丽英. 淬火温度对12Cr14Ni2不锈结构钢组织及力学性能的影响[J]. 东北大学学报（自然科学版）, 2021, 42(6): 781-788.
[12]	董硕，沙松，蒙世仟，荣冠. 液氮冷却作用下三类高温岩石力学性能试验研究[J]. 东北大学学报（自然科学版）, 2021, 42(11): 1591-1599.
[13]	蔡志辉，文光奇，韩阿康，张开华. 调质工艺对V微合金油井管用钢力学性能的影响[J]. 东北大学学报（自然科学版）, 2021, 42(10): 1414-1420.
[14]	鲍君峰，于月光，贾成厂. ZrO₂添加量对等离子放电烧结制备WC-6Co组织和性能的影响[J]. 东北大学学报（自然科学版）, 2021, 42(1): 43-48.
[15]	王宏岩，于驰，高秀华. X65MS钢在饱和H₂S/CO₂环境下的腐蚀产物研究[J]. 东北大学学报:自然科学版, 2020, 41(6): 812-817.