基于分形理论的接触式机械密封端面泄漏模型

doi:10.12068/j.issn.1005-3026.2019.04.014

东北大学学报:自然科学版 ›› 2019, Vol. 40 ›› Issue (4): 526-530.DOI: 10.12068/j.issn.1005-3026.2019.04.014

基于分形理论的接触式机械密封端面泄漏模型

李小彭¹，杨泽敏¹，王琳琳¹，杨语星²

(1. 东北大学机械工程与自动化学院，辽宁沈阳110819; 2. 东北大学信息科学与工程学院，辽宁沈阳110819)

收稿日期:2018-01-29 修回日期:2018-01-29 出版日期:2019-04-15 发布日期:2019-04-26
通讯作者: 李小彭
作者简介:李小彭(1976-)，男，江西宁都人，东北大学教授，博士生导师.
基金资助:
国家自然科学基金资助项目(51875092); 中央高校基本科研业务费专项资金资助项目(N170302001).

Leakage Model of Contacting Mechanical Seal Based on Fractal Theory

LI Xiao-peng¹， YANG Ze-min¹， WANG Lin-lin¹， YANG Yu-xing²

1. School of Mechanical Engineering & Automation， Northeastern University， Shenyang 110819， China; 2.School of Information Science & Engineering， Northeastern University， Shenyang 110819， China.

Received:2018-01-29 Revised:2018-01-29 Online:2019-04-15 Published:2019-04-26
Contact: LI Xiao-peng
About author:-
Supported by:
-

摘要/Abstract

摘要： 目前对于密封的大多数研究都基于密封端面形貌和摩擦条件不变的假设，且大多忽略了密封端面形貌对泄漏的影响，也并未从微观角度考虑端面形貌的影响.基于分形理论，将动、静环端面的接触简化为粗糙表面与理想刚性平面的接触，建立了机械密封的泄漏模型，并对各分形参数、端面比载荷和材料参数对泄漏率的影响进行了研究，得到了机械密封分形维数D和端面比载荷p_○g与其泄漏量Q成反比;而特征长度尺度参数G和综合弹性模量E与其泄漏量Q成正比.计算泄漏率与实验数据验证了模型的准确性.

关键词: 分形理论, 机械密封, 接触端面, 端面形貌, 泄漏

Abstract: At present， most studies about the seal are based on the assumption that the seal surface topography and friction conditions are changeless. The influence of the seal surface topography on the leakage is mostly ignored as well as the effect of the microscopic perspective. Based on the fractal theory， the contact between surfaces of dynamic and static rings was simplified to the contact between rough surface and the ideal rigid plane， and a mechanical seal leakage model was established. The effects of fractal parameters， the surface unit load and material parameters on leakage rate were studied to obtain that the mechanical seal fractal dimension D and the end face specific load p_○g were inversely proportional to the leakage amount Q. The characteristic length scale parameter G and the comprehensive elastic modulus E were proportional to its leakage amount Q. The calculated leakage rate and experimental data verify the accuracy of the model.

Key words: fractal theory, mechanical seal, contact surface, surface topography, leakage

中图分类号:

TH136

李小彭，杨泽敏，王琳琳，杨语星. 基于分形理论的接触式机械密封端面泄漏模型[J]. 东北大学学报:自然科学版, 2019, 40(4): 526-530.

LI Xiao-peng， YANG Ze-min， WANG Lin-lin， YANG Yu-xing. Leakage Model of Contacting Mechanical Seal Based on Fractal Theory[J]. Journal of Northeastern University Natural Science, 2019, 40(4): 526-530.

参考文献

[1]顾永泉.机械密封实用技术［M］.北京:机械工业出版社，2001:10-30.(Gu Yong-quan.Mechanical seal technology ［M］.Beijing:Mechanical Industry Press，2001:10-30.)
[2]孙玉霞，李双喜，李继和.机械密封技术［M］.北京:化学工业出版社，2014:20-40.(Sun Yu-xia，Li Shuang-xi，Li Ji-he.Mechanical seal technology［M］.Beijing:Chemical Industry Press，2014:20-40.)
[3]Heinze E.ber gleitringdichtungen，mit besondererberücksic-htigung ihrer verwendung im kltemaschinenbau［J］.Kltetechnik，1949，1(2):26-32.
[4]Mayer E.Mechanical seals［M］.London:Newnes-Butterworths，1977:50-70.
[5]Lebeck A O.A study of mixed lubrication in contacting mechanical face seals［C］//4th Leeds Lyon Symposium on Lubrication.Lyon，1977:150-170.
[6]Lebeck A O.Hydrodynamic lubrication in wavy contacting face seals—a two dimensional model［J］.Journal of Tribology，1981，103(4):578-583.
[7]彭旭东，顾永泉.不同相态下端面形貌和流体惯性对机械密封性能的影响［J］.中国石油大学学报(自然科学版)，1990(3):62-70.(Peng Xu-dong，Gu Yong-quan.Effect of face morphology and fluid inertia on mechanical seal performance under different phase states［J］.Journal of China University of Petroleum(Natural Science)，1990(3):62-70.)
[8]Sun J J，Wei L，Feng X，et al.Leakage prediction method for contacting mechanical seals with parallel faces［J］.Chinese Journal of Mechanical Engineering，2010，23(1):7-15.
[9]Jordan D L，Hollins R C，Jakeman E.Measurement and characterization of multiscale surfaces［J］.Wear，1986，109(1/2/3/4):127-134.
[10]陈奇，黄守武，张振，等.考虑摩擦因素的两圆柱体表面接触承载能力的分形模型研究［J］.机械工程学报，2016，52(7):114-121.(Chen Qi，Huang Shou-wu，Zhang Zhen，et al.Fractal model of contact load-carrying capacity of two cylinders considering friction factors［J］.Journal of Mechanical Engineering，2016，52(7):114-121.)
[11]Chen H，Hu Y Z，Wang H，et al.Simulation and characteri-zation of fractalrough surfaces［J］.Chinese Journal of Mechanical Engineering，2006，42(9):219-226.
[12]Pan W J，Li X P，Wang L L，et al.Influence of contact stiffness of joint surfaces on oscillation system based on the fractal theory［J］.Archive of Applied Mechanics，2017，88(4):1-17.
[13]Pan W J，Li X P，Wang L L，et al.A normal contact stiffness fractal prediction model of dry-friction rough surface and experimental verification［J］.European Journal of Mechanics-A/Solids，2017，66:94-102.
[14]Chen Q，Xu F，Liu P，et al.Research on fractal model of normal contact stiffness between two spheroidal joint surfaces considering friction factor［J］.Tribology International，2016，97:253-264.
[15]成雨，原园，甘立，等.尺度相关的分形粗糙表面弹塑性接触力学模型［J］.西北工业大学学报，2016，34(3):485-492.(Cheng Yu，Yuan Yuan，Gan Li，et al.Scale correlation fractal rough surface elastic-plastic contact mechanics model［J］.Journal of Northwestern Polytechnical University，2016，34(3):485-492.)
[16]Pan W J，Li X P，Wang L L，et al.A loading fractal prediction model developed for dry-friction rough joint surfaces considering elastic-plastic contact［J］.Acta Mechanica，2018，229(9):1-14.
[17]孙见君.机械密封泄漏预测理论及其应用研究［D］.南京:南京工业大学，2006.(Sun Jian-jun.Mechanical seal leakage prediction theory and its application ［D］.Nanjing:Nanjing University of Technology，2006.)(上接第525页)
[7]Noda T，Nagaoka N，Ametani A.Fault-surge calculation using phase-domain ARMA line model［J］.Electrical Engineering in Japan，2015，121(3):27-35.
[8]Pan C，Wang J，Wang J，et al.Dynamics of an unsteady stagnation vortical flow via dynamic mode decomposition analysis［J］.Experiments in Fluids，2017，58(3):21-26.
[9]Honarbakhsh B，Tavakoli A.Application of an IE-based domain decomposition method for analysis of planar microstrip array structures:mesh less approach［J］.Applied Computational Electromagnetics Society Journal，2015，30(8):884-890.
[10]李瑞莹，康锐.基于ARMA模型的故障率预测方法研究［J］.系统工程与电子技术，2008(8):1588-1591.(Li Rui-ying，Kang Rui.Research on failure rate forecasting method based on ARMA model［J］.Systems Engineering and Electronics，2008(8):1588-1591.)
[11]王燕.应用时间序列分析［M］.北京:中国人民大学出版社，2005.(Wang Yan.Application time series analysis［M］.Beijing:China Renmin University Press，2005.)

基于分形理论的接触式机械密封端面泄漏模型

Leakage Model of Contacting Mechanical Seal Based on Fractal Theory

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 12

编辑推荐

Metrics

本文评价

[1]	程习康，刘巍，孙明浩，罗唯奇. 永磁涡流耦合器传递转矩计算方法研究[J]. 东北大学学报（自然科学版）, 2021, 42(12): 1739-1746.
[2]	李国军，李依擎，邱勇. 园区供热管网泄漏工况建模及分析[J]. 东北大学学报:自然科学版, 2020, 41(10): 1402-1409.
[3]	闫玉涛，王爽，胡广阳，张立静. 偏摆角对圆周密封结构特性及泄漏的影响[J]. 东北大学学报:自然科学版, 2019, 40(10): 1454-1461.
[4]	潘五九，李小彭，王雪，李木岩. 考虑三维结合部形貌的静摩擦因数非线性分形模型[J]. 东北大学学报:自然科学版, 2017, 38(10): 1447-1452.
[5]	闫放，许开立，姚锡文，王延瞳. 基于BN-bow-tie的生物质气化中毒事故分析[J]. 东北大学学报:自然科学版, 2015, 36(3): 437-441.
[6]	刘金海;张化光;冯健;. 基于压力时间序列的输油管道在线泄漏故障诊断算法[J]. 东北大学学报(自然科学版), 2009, 30(3): 321-324.
[7]	于海;徐喆;朱伟勇. 单纯形空间中的四元数分形集的构造与分析[J]. 东北大学学报(自然科学版), 2005, 26(1): 243-246.
[8]	伦淑娴;张化光;冯健. 基于神经网络的多传感器自适应滤波及其应用[J]. 东北大学学报(自然科学版), 2003, 24(8): 727-730.
[9]	冯健;张化光;伦淑娴;王占山. 输油管道泄漏监测与定位系统的研制[J]. 东北大学学报(自然科学版), 2003, 24(8): 731-734.
[10]	肖国清;温丽敏;陈宝智;王浩. 毒气泄漏时的最佳疏散路径[J]. 东北大学学报(自然科学版), 2001, 22(6): 674-677.
[11]	徐新阳;徐继润;罗茜;康雁. 微细粒赤铁矿凝聚体的内部结构[J]. 东北大学学报:自然科学版, 1997, 18(5): 4--.
[12]	徐新阳;徐继润罗茜;康雁. 表面电位对异向凝聚影响的计算机模拟[J]. 东北大学学报:自然科学版, 1996, 17(1): 5--.