东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2011, Vol. 32 ›› Issue (5): 622-625.DOI: -

• 论著 • 上一篇    下一篇

热连轧机轧制力和轧制力矩模型研究

李维刚;谭树彬;李家波;李龙;   

  1. 东北大学信息科学与工程学院;东北大学流程工业综合自动化国家重点实验室;宝钢集团有限公司自动化研究所;
  • 收稿日期:2013-06-19 修回日期:2013-06-19 发布日期:2013-04-04
  • 通讯作者: -
  • 作者简介:-
  • 基金资助:
    国家自然科学基金;;

Modelling rolling force and rolling torque in a hot strip mill

Li, Wei-Gang (1); Tan, Shu-Bin (1); Li, Jia-Bo (3); Li, Long (1)   

  1. (1) School of Information Science and Engineering, Northeastern University, Shenyang 110819, China; (2) State Key Laboratory of Integrated Automation for Process Industries, Northeastern University, Shenyang 110819, China; (3) Institute of Automation, Baosteel Co., Ltd., Shanghai 201900, China
  • Received:2013-06-19 Revised:2013-06-19 Published:2013-04-04
  • Contact: Li, W.-G.
  • About author:-
  • Supported by:
    -

RichHTML

0

PDF (PC)

978

摘要： 研究了一种适用于热连轧机的新型高精度轧制力和轧制力矩模型,建立了一个轧制力功系数和轧制力矩功系数的新型指数公式,将两个系数的表达式统一起来,仅含"压下率"和"压扁半径与出口厚度之比"两个影响因子,形式简洁,物理意义明显.给出了新型指数公式中待定参数的确定方法,求得的待定参数值对不同钢种和不同精轧机架具有通用性.预测实践表明,新型轧制力和轧制力矩模型提高了热连轧过程中轧制力和轧制力矩的预报精度,可用于热轧板带生产线精轧机架的在线控制.

关键词: 热轧带钢, 轧制力, 轧制力矩, 轧制力功系数, 轧制力矩功系数

Abstract: A new model for a type of rolling force and rolling torque for finishing stands of a hot strip mill was investigated. A new formula unifying rolling force and rolling torque coefficients was used to simultaneously model rolling force and rolling torque. Its physical meaning is readily understood, and it involves only two impacting factors, namely reduction rate and the ratio of flattening radius to exit thickness. A method is provided for obtaining unknown parameters in the new formula. The parameter values obtained are universal for different steel grades and different finishing stands. Simulation and experimental results show that the new model improves prediction accuracy of rolling force and rolling torque and can be used in online control in a hot mill strip rolling process.

中图分类号: