东北大学学报（自然科学版）

东北大学学报:自然科学版 ›› 2014, Vol. 35 ›› Issue (11): 1617-1621.DOI: 10.12068/j.issn.1005-3026.2014.11.022

• 机械工程 • 上一篇    下一篇

响应曲面法优化氨法焙烧后粉煤灰除铁工艺

王鹏，魏徳洲   

  1. (东北大学 资源与土木工程学院， 辽宁 沈阳110819)
  • 收稿日期:2013-08-23 修回日期:2013-08-23 出版日期:2014-11-15 发布日期:2014-07-03
  • 通讯作者: 王鹏
  • 作者简介:王鹏(1978-)，男，辽宁葫芦岛人，东北大学博士研究生；魏德洲(1956-)，男，河南南阳人，东北大学教授，博士生导师.
  • 基金资助:
    国家科技支撑计划项目(2012BAB01B00).

Optimization of Iron Removal Process for Calcine of Fly Ash and Ammonium Sulfate via Response Surface Methodology

WANG Peng， WEI Dezhou   

  1. School of Resources & Civil Engineering， Northeastern University， Shenyang 110819， China.
  • Received:2013-08-23 Revised:2013-08-23 Online:2014-11-15 Published:2014-07-03
  • Contact: WANG Peng
  • About author:-
  • Supported by:
    -

RichHTML

0

PDF (PC)

522

摘要： 通过响应曲面法(RSM)对粉煤灰与硫酸铵焙烧产物的浸出液进行除铁工艺参数的优化.以反应温度、溶液pH值和晶种加入量为变量，反应后溶液中铝离子质量浓度和铁离子质量浓度为相应变量，分别对黄铵铁矾法除铁过程和针铁矿法除铁过程建立相应的数学模型，并对影响因素进行了分析.通过实验对模型进行了检验，其误差在5%以内，表明模型具有一定的可靠性.对模型进行求解后，分别得出黄铵铁矾法除铁和针铁矿法除铁最佳工艺条件.

关键词: 响应曲面法, 黄铵铁矾法除铁, 针铁矿法除铁, 工艺条件

Abstract: The optimization of process parameters of iron removal for leachable liquid which is from calcined production of the fly ash and ammonia sulfate was described. The corresponding mathematical model on iron removal by ammonium jarosite method and goethite method were established，respectively. In the above process， the reaction temperature， pH value and adding amount of seed precipitation were variable， and the concentration of aluminum ions and iron ions were corresponding variables. The affecting factors were analyzed at the same time. The models are checked by experiment， and the error is less than 5%， which indicates the models are reliable. After the solution of the models， the best process condition of iron removal is given via ammonium jarosite method and goethite method respectively.

Key words: response surface methodology(RSM), removal of iron by ammonium jarosite method, removal of iron by goethite method, process condition

中图分类号: