基于PHF-LSM-MT的非均质岩石细观界面与水力压裂数值建模

doi:10.12068/j.issn.1005-3026.2021.08.010

东北大学学报（自然科学版） ›› 2021, Vol. 42 ›› Issue (8): 1127-1135.DOI: 10.12068/j.issn.1005-3026.2021.08.010

基于PHF-LSM-MT的非均质岩石细观界面与水力压裂数值建模

李明，赵岐，张砚琨，梁力

(东北大学资源与土木工程学院，辽宁沈阳110819)

修回日期:2020-11-10 接受日期:2020-11-10 发布日期:2021-09-02
通讯作者: 李明
作者简介:李明(1980-)，男，辽宁沈阳人，东北大学副教授.
基金资助:
中央高校基本科研业务费专项资金资助项目(N2001015)；国家留学基金委项目(201906085021)；国家自然科学基金资助项目(51474048).

Numerical Modeling for the Material Interface of Heterogeneous Rock at Mesoscale and Hydraulic Fracturing Based on the PHF-LSM-MT

LI Ming， ZHAO Qi， ZHANG Yan-kun， LIANG Li

School of Resources & Civil Engineering， Northeastern University， Shenyang 110819， China.

Revised:2020-11-10 Accepted:2020-11-10 Published:2021-09-02
Contact: ZHAO Qi
About author:-
Supported by:
-

摘要/Abstract

摘要： 基于PHF(permeability-based hydraulic fracture)模型，采用水平集方法(level set method，LSM)描述材料边界分布，并用多尺度方法MT模型，对材料有效参数进行均匀化，建立适用于考虑非均质岩石材料细观界面特征分布与水力裂缝动态发展过程的PHF-LSM-MT数值计算模型.该模型解决了已有PHF-LSM模型无法精确描述积分点作用范围内细观尺度材料分布特征的问题.通过比较包裹体几何分布和体积分数影响下的有效弹性参数，验证了采用MT模型均匀化细观特征的可行性;在此基础上，对非均质岩石水力裂缝发展过程进行研究，得到了考虑细观界面特征情况下的裂缝发展过程，探讨了等效开裂区域影响范围内关键位置的水压力变化特征和应力路径发展过程.

关键词: 水力压裂;岩石材料界面;PHF-LSM;均匀化方法

Abstract: The permeability-based hydraulic fracture(PHF) method is integrated with the level set method(LSM) and Mori-Tanaka(MT) model to study the hydraulic fracture propagation in heterogeneous rock(HR)with the mesoscale material interface being considered. In the proposed method， the PHF method is for simulating the hydraulic fracture propagation， and the LSM is for capturing the material interface with the mesoscale material properties of integration points being homogenized by MT model. To verify the mesoscale homogenization modeling procedure for HR， numerical simulations were carried out to estimate the effective elastic properties of HR with the volume fraction and inclusions’ dimension being taken into account， and the results indicate that the proposed method is capable of homogenizing the material properties at mesoscale. Numerical simulations of hydraulic fracture propagation in HR with the mesoscale material interface show the characteristics of hydraulic fracture development， the features of pore pressures and stress paths of the equivalent fracture zone.

Key words: hydraulic fracture; material interface of rock; PHF-LSM; homogenization method

中图分类号:

TV139.1
TE31

李明，赵岐，张砚琨，梁力. 基于PHF-LSM-MT的非均质岩石细观界面与水力压裂数值建模[J]. 东北大学学报（自然科学版）, 2021, 42(8): 1127-1135.

LI Ming， ZHAO Qi， ZHANG Yan-kun， LIANG Li. Numerical Modeling for the Material Interface of Heterogeneous Rock at Mesoscale and Hydraulic Fracturing Based on the PHF-LSM-MT[J]. Journal of Northeastern University(Natural Science), 2021, 42(8): 1127-1135.

参考文献

[1]Rahman M M，Rahman M K.A review of hydraulic fracture models and development of an improved pseudo-3D model for stimulating tight oil gas sand［J］.Energy Sources，Part A:Recovery，Utilization，and Environmental Effects，2010，32(1):1416-1436.
[2]Hu Y J，Chen G L，Cheng W P，et al.Simulation of hydraulic fracturing in rock mass using a smeared crack model［J］.Computer and Structure，2014，137:72-77.
[3]Zhai L H，Zhang H，Pan D B，et al.Optimisation of hydraulic fracturing parameters based on cohesive zone method in oil shale reservoir with random distribution of weak planes［J］.Journal of Natural Gas Science and Engineering，2020，75:103130.
[4]Saberhosseini S E，Ahangari K，Mohammadrezaei H.Optimization of the horizontal-well multiple hydraulic fracturing operation in a low-permeability carbonate reservoir using fully coupled XFEM model［J］.International Journal of Rock Mechanics and Mining Sciences，2019，114:33-45.
[5]Zhuang X Y，Zhou S W，Sheng M，et al.On the hydraulic fracturing in naturally-layered porous media using the phase field method［J］.Engineering Geology，2020，266:105306.
[6]Li M，Guo P J，Stolle D，et al.Development of hydraulic fracture zone in heterogeneous material based on smeared crack method［J］.Journal of Natural Gas Science and Engineering，2016，35:761-774.
[7]Li M，Guo P J，Stolle D，et al.Modeling hydraulic fracture in heterogeneous rock materials using permeability-based hydraulic fracture model［J］.Underground Space，2020，5(2):167-183.
[8]Osher S，Sethian J A.Fronts propagating with curvature-dependent speed:algorithms based on Hamilton-Jacobi formulations［J］.Journal of Computational Physics，1988，79(1):12-49.
[9]Li M，Guo P J，Stolle D，et al.Modeling method for a rock matrix with inclusions distributed and hydraulic fracturing characteristics［J］.Journal of Petroleum Science and Engineering，2017，157:409-421.
[10]Li M，Guo P J，Stolle D，et al.Modeling method and hydraulic fracture propagation for jointed rock mass using PHF-LSM method［J］.Journal of Natural Gas Science and Engineering，2019，68:102910.
[11]Li M，Guo P J，Stolle D，et al.Heterogeneous rock modelling method and characteristics of multistage hydraulic fracturing based on the PHF-LSM method［J］.Journal of Natural Gas Science and Engineering，2020，83:103518.
[12]Klusemann B，Bhm H J，Svendsen B.Homogenization methods for multi-phase elastic composites with non-elliptical reinforcements:comparisons and benchmarks［J］.European Journal of Mechanics A:Solids，2012，34:21-37.
[13]Will J，Eckardt S，Ranjan A.Numerical simulation of hydraulic fracturing process in an enhanced geothermal reservoir using a continuum homogenized approach［J］.Procedia Engineering，2017，191:821-828.
[14]Meng Q X，Wang H L，Xu W Y，et al.Numerical homogenization study on the effects of columnar jointed structure on the mechanical properties of rock mass［J］.International Journal of Rock Mechanics and Mining Sciences，2019，124:104127.
[15]Cao Y J，Shen W Q，Shao J F，et al.Numerical homogenization of elastic properties and plastic yield stress of rock-like materials with voids and inclusions at same scale［J］.European Journal of Mechanics A:Solids，2020，81:103958.
[16]Mori T，Tanaka K.Averages stress in matrix and average elastic energy of materials with misfitting inclusions［J］.Acta Metallurgica et Materialia，1973，21(5):571-574.
[17]Qu J M，Cherkaoui M C.Inclusions and inhomogeneities［M］// Fundamentals of Micromechanics of Solids.［S.l.］:John Wiley & Sons，2006.
[18]Halpin J C，Kardos J L.Halpin-Tsai equations:a review［J］.Polymer Engineering and Science.1976，16(5):344-352.
[19]Zhang H T，Zhu J M，Liu Y H，et al.Strength properties of jointed rock masses based on the homogenization method［J］.Acta Mechanica Solida Sinica，2012，25(2):177-185.
[20]李明，梁力，Guo Pei-jun，等.弥散裂缝模型水力压裂数值方法的网格敏感性分析［J］.东北大学学报(自然科学版)，2015，36(9):1337-1341.(Li Ming，Liang Li，Guo Pei-jun，et al.Mesh sensitivity analysis of solution to hydraulic fracture problems based on a smeared crack model［J］.Journal of Northeastern University(Nature Science)，2015，36(9):1337-1341.)
[21]Corey A T.The interrelation between gas and oil relative permeabilities［J］.Producers Monthly，1954，19:38-41.
[22]Yew C H，Weng X W.Mechanics of hydraulic fracturing［M］.［S.l.］:Gulf Professional Publishing，1997.

基于PHF-LSM-MT的非均质岩石细观界面与水力压裂数值建模

Numerical Modeling for the Material Interface of Heterogeneous Rock at Mesoscale and Hydraulic Fracturing Based on the PHF-LSM-MT

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 6

编辑推荐

Metrics

本文评价

[1]	李明，史艺涛，李鑫，梁力. 基于水平集法的三维非均质岩石建模及水力压裂特性[J]. 东北大学学报:自然科学版, 2019, 40(1): 109-114.
[2]	刘杰，赵兴东，温新亮. 地下水封储油洞库各向异性渗流特征的数值模拟[J]. 东北大学学报:自然科学版, 2015, 36(11): 1638-1642.
[3]	李明，梁力， GUO Pei-jun，李鑫. 弥散裂缝模型水力压裂数值方法的网格敏感性分析[J]. 东北大学学报:自然科学版, 2015, 36(9): 1337-1341.
[4]	李明，张砚琨，赵岐，梁力. 基于EPHF模型均质多孔岩石材料水力压裂特性[J]. 东北大学学报（自然科学版）, 2021, 42(7): 996-1004.
[5]	李明，赵岐，陈昭，梁力. 基于PHF-LSM-MT法岩石材料细观边界建模与水力裂缝扩展研究[J]. 东北大学学报（自然科学版）, 2022, 43(10): 1461-1468.
[6]	李明，陈昭，赵岐，梁力. 基于PHF-LSM模型岩石分段水力压裂应力阴影效应[J]. 东北大学学报（自然科学版）, 2022, 43(11): 1613-1622.