东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2007, Vol. 28 ›› Issue (3): 397-400.DOI: -

• 论著 • 上一篇    下一篇

SSCK40的数控机床防护罩设计

刘阳;朱春霞;黄亚力;蔡光起;   

  1. 东北大学机械工程与自动化学院;东北大学机械工程与自动化学院;东北大学机械工程与自动化学院;东北大学机械工程与自动化学院 辽宁沈阳110004;辽宁沈阳110004;辽宁沈阳110004;辽宁沈阳110004
  • 收稿日期:2013-06-24 修回日期:2013-06-24 出版日期:2007-03-15 发布日期:2013-06-24
  • 通讯作者: Liu, Y.
  • 作者简介:-
  • 基金资助:
    国家自然科学基金资助项目(50475052)

Design for shields of NC machine tool SSCK40

Liu, Yang (1); Zhu, Chun-Xia (1); Huang, Ya-Li (1); Cai, Guang-Qi (1)   

  1. (1) School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110004, China
  • Received:2013-06-24 Revised:2013-06-24 Online:2007-03-15 Published:2013-06-24
  • Contact: Liu, Y.
  • About author:-
  • Supported by:
    -

RichHTML

1

PDF (PC)

1703

摘要： 根据人机工程学原理对数控机床SSCK40防护罩外观造型进行虚拟设计,利用AUTOCAD软件绘制二维图,用SolidWorks软件进行三维造型,然后进行装配干涉检验,最后由PhotoShop软件生成数控机床外观造型设计图,这样可以缩短产品的开发研制周期,降低生产成本,使产品在市场上更具有竞争力.

关键词: 数控机床, 防护罩, 造型设计, 人机工程学, 虚拟设计

Abstract: Based on ergonomics, a virtual appearance design was carried out for the shields of the NC machine tool SSCK40. The whole design process was completed by such softwares as AUTOCAD, SolidWorks and PhotoShop for 2-D drawing, 3-D modeling and the entire appearance design of the NC machine tool, respectively. The virtual design process proposed is proved available to shorten the R&D period of new products and decrease production cost, thus enhancing the competitiveness of the NC machine tool on market.

中图分类号: