东北大学学报（自然科学版）

东北大学学报:自然科学版 ›› 2016, Vol. 37 ›› Issue (1): 74-78.DOI: 10.12068/j.issn.1005-3026.2016.01.016

• 资源与土木工程 • 上一篇    下一篇

基于Mathews稳定图法的采空区稳定性评价

赵永1， 杨天鸿1， 王薪荣2， 胡高建1   

  1. (1. 东北大学 资源与土木工程学院， 辽宁 沈阳110819；2. 中冶京诚(秦皇岛)工程技术有限公司， 河北 秦皇岛066000)
  • 收稿日期:2014-12-01 修回日期:2014-12-01 出版日期:2016-01-15 发布日期:2016-01-08
  • 通讯作者: 赵永
  • 作者简介:赵永(1991-)，男，山东临沂人，东北大学博士研究生； 杨天鸿(1968-)，男，辽宁抚顺人，东北大学教授，博士生导师.
  • 基金资助:
    国家重点基础研究发展计划项目(2013CB227902); 国家自然科学基金资助项目(51174045，51474051).

Stability Evaluation of Stope Based on Mathews Graph Method

ZHAO Yong1， YANG Tian-hong1， WANG Xin-rong2， HU Gao-jian1   

  1. 1.School of Resources & Civil Engineering，Northeastern University， Shenyang 110819， China; 2. MCC Capital Engineering & Research Incorporation Qinhuangdao Co.， Ltd.，Qinhuangdao 066000， China.
  • Received:2014-12-01 Revised:2014-12-01 Online:2016-01-15 Published:2016-01-08
  • Contact: ZHAO Yong
  • About author:-
  • Supported by:
    -

RichHTML

0

PDF (PC)

871

摘要： 针对赤峰红岭铅锌矿多年开采遗留下的80个未处理的采空区问题，通过对该矿山工程地质调查、矿岩力学试验，获取了表征矿山岩体质量的多种指标.依据获取的矿岩力学指标，利用Mathews稳定图法计算出试验采空区的稳定数和水力半径，并通过重新绘制的Mathews稳定图和等概率图的合成图，评价出采空区的稳定性以及稳定概率.利用FLAC3D对试验采空区进行数值模拟，结果与利用Mathews稳定图法评价的结果一致.对不稳定采空区进行了参数优化，并对不稳定采空区提出了支护措施.可通过该方法对红岭铅锌矿所有采空区进行评价，并可为类似矿山提供参考.

关键词: Mathews稳定图, Q系统, 采空区稳定性, FLAC3D, 支护设计

Abstract: There are eighty unprocessed mined-out areas in Hongling lead-zinc ore for years of mining.In order to evaluate the stability of the goafs， several kinds of indexes representing the engineering quality of rock mass in mines were acquired by the survey of engineering geology and the ore-bearing rock mechanics experiments. According to the acquired ore and rock mechanics index， the stability number and radius of hydraulic in testing goaf were calculated using the Mathews stability graph method.And stability and probability of the testing goaf were evaluated by rendering synthetic map including the isoprobability contours and the Mathews stability graph. The testing goaf was simulated with FLAC3D， and the results agreed well with the results by using the Mathews stability graph method. The parameters for unstable goaf were optimized， and some supporting measures for the unstable goaf were proposed. This method can be used to evaluate all goafs in Hongling ore and provide reference for the similar mines.

Key words: Mathews stability graph, Q system, stability of goaf, FLAC3D, support design

中图分类号: