1 |
Kim S H, Seo M, Ban J,et al.Mold oscillation feedforward control algorithm for sinusoidal oscillation of various asymmetries[J].ISIJ International,2017,57(11):2016-2021.
|
2 |
Chao Z, Yang C, Zhang X Z,et al.Conformation and experiment on non‐sinusoidal oscillation waveform function for continuous casting mold[J].Mechanics of Solids,2021,56(6):1114-1123.
|
3 |
Kamaraj A, Haldar N, Murugaiyan P,et al.High‐temperature simulation of continuous casting mould phenomena[J].Transactions of the Indian Institute of Metals,2020,73(8):2025-2031.
|
4 |
Zhou C, Zhang X Z, Wang F,et al.Mold oscillating system with optimized non‑sinusoidal oscillation profile[J].Metallurgist,2019,63(5/6):585-597.
|
5 |
Wang W L, Long X K, Zhang H H,et al.Mold simulator study of effect of mold oscillation frequency on heat transfer and lubrication of mold flux[J].ISIJ International,2018,58(9):1695-1704.
|
6 |
Meng X N, Zhu M Y.Optimization of non‑sinusoidal oscillation parameters for continuous casting mold with high casting speed[J].Journal of Iron and Steel Research,International,2008,15(1):510-516.
|
7 |
张兴中,刘庆国,黄文,等.连铸结晶器非正弦振动函数及工艺参数研究[J].钢铁,2014,49(8):42-47.
|
|
Zhang Xing‑zhong, Liu Qing‑guo, Huang Wen,et al.Investigation of non‑sinusoidal oscillation waveform function and technological parameters for continuous casting mold[J].Iron & Steel,2014,49(8):42-47.
|
8 |
张兴中,周超,刘平飞,等.双偏心驱动结晶器非正弦振动波形及工艺参数研究[J].中国机械工程,2016,27(23):3125-3129,3135.
|
|
Zhang Xing‑zhong, Zhou Chao, Liu Ping‑fei,et al.Investigation of waveform and technological parameters for non‑sinusoidal oscillation of mold driven by double eccentric shafts[J].China Mechanical Engineering,2016,27(23):3125-3129,3135.
|
9 |
Zhou C, Zhang X Z, Wang F,et al.Investigation of non‑sinusoidal oscillator driven by double servomotors for continuous casting mold[J].IEEE Access,2019,8:1235-1239.
|
10 |
Zhou C, Zhang X Z, Wang F,et al.Investigation of non‑sinusoidal oscillator of continuous casting mold synchronously driven by double servomotors and technological parameters[J].Journal of the Chinese Society of Mechanical Engineers,Series C:Transactions of the Chinese Society of Mechanical Engineers,2019,40(1):33-40.
|
11 |
Deng Y K, Zhang Y B, Wang Q Q,et al.Study of mold oscillation parameters and modes on slag lubrication in slab continuous casting[J].Journal of the Minerals,Metals & Materials Society,2018,70(12):2909-2916.
|
12 |
孟祥宁,朱苗勇,汪宁,等.连铸结晶器非正弦振动方法:201610983770.1[P].2017-01-17.
|
|
Meng Xiang‑ning, Zhu Miao‑yong, Wang Ning,et al.Non‑sinusoidal oscillation method of continuous casting mold:201610983770.1[P].2017-01-17.
|
13 |
Zhang X J.Simulation and study on non‑sinusoidal oscillation control system of continuous casting mold[J].Advanced Engineering Forum,2012(2/3):53-56.
|
14 |
刘大伟,任廷志.非圆齿轮驱动结晶器非正弦振动的研究[J].中国机械工程,2013,24(3):327-331.
|
|
Liu Da‑wei, Ren Ting‑zhi.Research on nonsinusoidal oscillation of mold driven by noncircular gears[J].China Mechanical Engineering,2013,24(3):327-331.
|
15 |
周超,张兴中,刘平飞,等.连铸结晶器非正弦振动装置建模与固有特性分析[J].中国机械工程,2018,29(16):1921-1926.
|
|
Zhou Chao, Zhang Xing‑zhong, Liu Ping‑fei,et al.Modeling and natural characteristic of non‑sinusoidal oscillator of continuous casting molds[J].China Mechanical Engineering,2018,29(16):1921-1926.
|
16 |
Zhou C, Zhang X Z, Wang F,et al.Mechanism analysis of non‑sinusoidal oscillation of continuous casting mold synchronously driven by double servomotors[J].Journal of Iron and Steel Research,International,2017,24(3):251-257.
|
17 |
Yang J, Meng X N, Wang N,et al.Oscillation‑mark formation and liquid‐slag consumption in continuous casting mold[J].Metallurgical and Materials Transactions B,2017,48(2):1230-1247.
|
18 |
Yang J, Meng X N, Zhu M Y.Experimental study on mold flux lubrication for continuous casting[J].Steel Research International,2014,85(4):710-717.
|
19 |
孟祥宁,朱苗勇.连铸结晶器非正弦振动波形构造及参数研究[J].中国机械工程,2007,18(15):1779-1782.
|
|
Meng Xiang‑ning, Zhu Miao‑yong.Non‑sinusoidal oscillation waveform conformation and parametrical research for continuous casting mold[J].China Mechanical Engineering,2007,18(15):1779-1782.
|