连铸结晶器非正弦振动共振分析

doi:10.12068/j.issn.1005-3026.2019.09.011

东北大学学报:自然科学版 ›› 2019, Vol. 40 ›› Issue (9): 1273-1278.DOI: 10.12068/j.issn.1005-3026.2019.09.011

连铸结晶器非正弦振动共振分析

孟祥宁，崔禹，吕则胜，彭修星

(东北大学冶金学院，辽宁沈阳110819)

收稿日期:2018-09-05 修回日期:2018-09-05 出版日期:2019-09-15 发布日期:2019-09-17
通讯作者: 孟祥宁
作者简介:孟祥宁(1977-)，男，辽宁本溪人，东北大学副教授，博士生导师.
基金资助:
中央高校基本科研业务费专项资金资助项目(N172502006)；辽宁省自然科学基金资助项目(201602258).

Resonance Analysis of Non-sinusoidal Oscillations of Continuous Casting Mold

MENG Xiang-ning， CUI Yu， LYU Ze-sheng， PENG Xiu-xing

School of Metallurgy， Northeastern University， Shenyang 110819， China.

Received:2018-09-05 Revised:2018-09-05 Online:2019-09-15 Published:2019-09-17
Contact: MENG Xiang-ning
About author:-
Supported by:
-

摘要/Abstract

摘要： 根据谐波共振理论，连铸结晶器做非正弦振动且振频低于振动机构自然频率时，由于谐波频率是振频的整数倍，一部分幅值较大的谐波可引发共振.利用傅里叶变换对连铸结晶器非正弦振动加速度函数进行谐波分析，得该波形谐波幅值与振幅、振频、非正弦因子和谐波阶数的变化关系，从理论上给出一种削弱共振的方法.当结晶器振动机构的自然频率已知时，不同振频下可引起共振的谐波阶数是确定的.通过谐波幅值与各振动参数的变化关系，得到不同振动参数组合对应的谐波幅值.采用谐波幅值较小的振动参数组合，可削弱共振现象对连铸结晶器振动机构的不利影响，减小结晶器偏摆量，维持钢液液面稳定，改善连铸机工作状况.

关键词: 连铸, 结晶器, 非正弦振动, 共振, 谐波分析

Abstract: According to the harmonic resonance theory， when the continuous casting mold is non-sinusoidal oscillation and the vibration frequency is lower than the natural frequency of the oscillator in the mold， partial harmonics with a higher amplitude can lead to resonance because the harmonic frequencies is an integer multiple of the oscillation frequency， which can directly affect the quality of slab. Using Fourier transformation， the acceleration curve of non-sinusoidal oscillation of the mold is analyzed and the relationships between harmonic amplitude and other factors， such as initial amplitude， oscillation frequency， non-sinusoidal oscillation factor and harmonic order are obtained. Then， a theoretical method of restraining resonance can be given. When the natural frequency of the oscillator in the mold is known， the harmonic order of resonance under different oscillation frequencies is determined. The harmonic amplitude corresponding to the combination of different oscillation parameters can be given by the relationship between the harmonic amplitude and the variation of each oscillation parameter. Consequently， selecting an oscillation parameter combination with a smaller harmonic amplitude can reduce the adverse effect of resonance phenomenon on the oscillator in the mold， resulting to reduce the deflection of mold， maintain liquid level stabilizing and improve the working conditions of continuous casting machine.

Key words: continuous casting, mold, non-sinusoidal oscillation, resonance, harmonic analysis

中图分类号:

TF341.6

孟祥宁，崔禹，吕则胜，彭修星. 连铸结晶器非正弦振动共振分析[J]. 东北大学学报:自然科学版, 2019, 40(9): 1273-1278.

MENG Xiang-ning， CUI Yu， LYU Ze-sheng， PENG Xiu-xing. Resonance Analysis of Non-sinusoidal Oscillations of Continuous Casting Mold[J]. Journal of Northeastern University Natural Science, 2019, 40(9): 1273-1278.

参考文献

[1]李宪奎，朱清香，郑学然，等.结晶器非正弦振动波形及参数研究［J］.钢铁，1998，33(11):28-31.(Li Xian-kui，Zhu Qing-xiang，Zheng Xue-ran，et al.Research on non-sinusoidal oscillation waveform and parameters of mold ［J］. Iron and Steel，1998，33(11):28-31.)
[2]方一鸣，郑会成，王宏斌，等.伺服电动机驱动的连铸结晶器非正弦振动控制系统［J］.冶金自动化，2016，40(6):12-18，29.(Fang Yi-ming，Zheng Hui-cheng，Wang Hong-bin，et al.Non-sinusoidal oscillation control system of continuous casting mold driven by servo motor ［J］.Metallurgical Industry Automation，2016，40(6):12-18，29.)
[3]Sotnikov A L，Kikin A B.Theoretical foundations of the design of a lever mechanism of oscillations of the mold of a sorting machine for the continuous casting of billets ［J］.Metallurgist，2018，61(11/12):1075-1083.
[4]Park Y H，Park H.Dynamic characteristic analysis of mold oscillator including improved gear mesh model and cam profile for eccentric shaft ［J］. Journal of Mechanical Science and Technology，2014，28(11):4465-4473.
[5]仲红刚.连铸坯凝固过程热模拟研究［D］.上海:上海大学，2013.(Zhong Hong-gang.Thermal simulation study on solidification process of continuous casting billet ［D］.Shanghai:Shanghai University，2013.)
[6]Park J Y，Sohn I.Evaluating the heat transfer phenomena and the interfacial thermal resistance of mold flux using a copper disc mold simulator［J］.International Journal of Heat and Mass Transfer，2017，109:1014-1025.
[7]Arunkumar S，Rao K V S，Kumar T S P.Spatial variation of heat flux at the metal-mold interface due to mold filling effects in gravity die-casting［J］.International Journal of Heat and Mass Transfer，2008，51(11):2676-2685.
[8]Rywotycki M，Malinowski Z，Gielecki J，et al.Modelling liquid steel motion caused by electromagnetic stirring in continuous casting steel process［J］.Archives of Metallurgy and Materials，2014，59(2):487-492.
[9]Opiela M，Grajcar A.Modification of non-metallic inclusions by rare-earth elements in microalloyed steels［J］.Archives of Foundry Engineering，2012，12(2):129-134.
[10]Lipiński T，Wach A.Size of non-metallic inclusions in high-grade medium carbon steel［J］.Archives of Foundry Engineering，2014，14(4):55-60.
[11]Lamut J，Falkus J，Jurjevec B，et al.Influence of inclusions modification on nozzle clogging［J］.Archives of Metallurgy and Materials，2012，57(1):319-324.
[12]孟祥宁，朱苗勇.连铸结晶器非正弦振动波形构造及参数研究［J］.中国机械工程，2007，18(15):1779-1782.(Meng Xiang-ning，Zhu Miao-yong.Non-sinusoidal oscillation waveform conformation and parametrical research for continuous casting mold ［J］.China Mechanical Engineering，2007，18(15):1779-1782.)
[13]杨红普，李宪奎，张兴中，等.结晶器非正弦振动谐波共振［J］.机械工程学报，2007，43(7):207-212.(Yang Hong-pu，Li Xian-kui，Zhang Xing-zhong，et al.Harmonic resonance in non-sinusoidal oscillation of mold ［J］.Journal of Mechanical Engineering，2007，43(7):207-212.)
[14]吴晓明.连铸结晶器非正弦振动控制的研究［D］.秦皇岛:燕山大学，2001.(Wu Xiao-ming.Study on non-sinusoidal oscillation control used in continuous casting mold ［D］.Qinhuangdao:Yanshan University，2001.)
[15]孟祥宁，朱苗勇.高拉速连铸结晶器非正弦振动同步控制模型［J］.钢铁研究学报，2007，19(7):19-23.(Meng Xiang-ning，Zhu Miao-yong.Non-sinusoidal oscillation synchro-control model for continuous casting mold at high casting speed ［J］.Journal of Iron and Steel Research，2007，19(7):19-23.)(上接第1244页)
[8]Kips J G，Schutte A E，Vermeersch S J，et al.Comparison of central pressure estimates obtained from SphygmoCor，Omron HEM-9000AI and carotid applanation tonometry ［J］.Journal of Hypertension，2011，29(6):1115-1120.
[9]Hahn J O，Reisner A T，Asada H H.Blind identification of two-channel IIR systems with application to central cardiovascular monitoring ［J］.Journal of Dynamic Systems Measurement & Control，2009，131(5):545-553.
[10]Qiu W，Hua Y.Performance comparison of three methods for blind channel identification［C］// IEEE International Conference on Acoustics.［S.l.］:ICASSP，1996:2423-2426.
[11]Xu G，Liu H，Tong L，et al.A least-squares approach to blind channel identification ［J］.IEEE Transactions on Signal Processing， 1995，43(12):2982-2993.
[12]Hua Y B.Fast maximum likelihood for blind identification of multiple FIR channels ［C］//Proceedings of 1994 28th Asilomar Conference on Signals， Systems and Computers.Pacific Grove，1994:471-478.
[13]Patel A，Li J，Finegan B，et al.Aortic pressure estimation using blind identification approach on single input multiple output non-linear Wiener systems ［J］. IEEE Transactions on Biomedical Engineering，2018，65(6):1193-1200.
[14]Mayyala Q，Meraim K A，Zerguine A.Structure-based subspace method for multi-channel blind system identification ［J］.IEEE Signal Processing Letters，2017，24(8):1183-1187.
[15]Moulines E，Duhamel P，Cardoso J F，et al.Subspace methods for the blind identification of multichannel FIR filters ［J］.IEEE Transactions on Signal Processing， 1995，43(2):516-525.
[16]Diamantaras K I，Papadimitriou T.An efficient subspace method for the blind identification of multichannel FIR systems ［J］.IEEE Transactions on Signal Processing，2008，56(12):5833-5839.
[17]方崇智.过程辨识［M］.北京:清华大学出版社，1998.(Fang Chong-zhi.Process identification ［M］.Beijing:Tsinghua University Press，1998.)
[18]马春华.基于子空间的盲辨识和盲均衡算法［D］.西安:西安电子科技大学，2005.(Ma Chun-hua.Subspace-based methods for blind identification and blind equalization ［D］.Xi′an:Xidian University of Electronic Technology，2005.)

连铸结晶器非正弦振动共振分析

Resonance Analysis of Non-sinusoidal Oscillations of Continuous Casting Mold

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	郭嘉欢，王伯昕，张添奇，王诗煜. 纤维编织网增强混凝土抗渗性能研究[J]. 东北大学学报（自然科学版）, 2022, 43(9): 1354-1360.
[2]	信俊昌，郭恩铭，张嘉正. 基于时序区分子图的阿尔茨海默症辅助诊断方法[J]. 东北大学学报（自然科学版）, 2022, 43(8): 1089-1096.
[3]	宋红宇，刘海涛，王国栋. 薄带连铸取向硅钢的热轧孪生行为[J]. 东北大学学报（自然科学版）, 2022, 43(2): 182-187.
[4]	赵春雨，端维海，姜孟超，王元昊. 双液压马达驱动沉桩系统的自同步理论[J]. 东北大学学报（自然科学版）, 2022, 43(10): 1446-1453.
[5]	王艳飞，覃文军，杨金柱，康雁. 一种快速自旋回波的受激回波伪影校正方法[J]. 东北大学学报（自然科学版）, 2021, 42(1): 147-152.
[6]	王卓，李宝宽，刘中秋，牛冉. 垂直连铸凝固过程的数值模拟研究[J]. 东北大学学报:自然科学版, 2020, 41(9): 1257-1261.
[7]	王艳飞，杨金柱，康雁. 永磁磁共振扩散加权平面回波成像涡流伪影校正[J]. 东北大学学报:自然科学版, 2020, 41(7): 1048-1053.
[8]	宋红宇，刘海涛，王国栋. 薄带连铸因瓦合金的组织、织构及力学性能研究[J]. 东北大学学报:自然科学版, 2020, 41(5): 723-728.
[9]	李稷，徐安军. 炼钢车间多天车动态调度仿真方案[J]. 东北大学学报:自然科学版, 2020, 41(12): 1699-1707.
[10]	吕江涛，王筱钧，鄂思宇，张亚男. 用于硝酸根浓度测量的反射式光纤SPR传感器[J]. 东北大学学报:自然科学版, 2019, 40(8): 1075-1079.
[11]	翟莹莹，厉英，敖志广. 基于改进多目标遗传算法的连铸二冷过程优化[J]. 东北大学学报:自然科学版, 2019, 40(5): 658-662.
[12]	齐守良，李萌，高青君，余晖. 多发性硬化症患者DTI图像定量化分析[J]. 东北大学学报:自然科学版, 2018, 39(9): 1232-1237.
[13]	马树军，玄航，孙嘉蔚，杨磊. 在非黏性流体域中微悬臂梁振动的建模与仿真[J]. 东北大学学报:自然科学版, 2018, 39(9): 1272-1276.
[14]	王鹤松，袁国，曹光明，王国栋. 双辊薄带连铸低碳微合金钢的铸态组织[J]. 东北大学学报:自然科学版, 2018, 39(4): 497-500.
[15]	杨金柱，陆琳，曹鹏，赵大哲. 基于改进BET的MRI脑组织自动提取算法[J]. 东北大学学报:自然科学版, 2018, 39(2): 186-190.