基于PHF-LSM-MT法岩石材料细观边界建模与水力裂缝扩展研究

doi:10.12068/j.issn.1005-3026.2022.10.013

东北大学学报（自然科学版） ›› 2022, Vol. 43 ›› Issue (10): 1461-1468.DOI: 10.12068/j.issn.1005-3026.2022.10.013

基于PHF-LSM-MT法岩石材料细观边界建模与水力裂缝扩展研究

李明，赵岐，陈昭，梁力

(东北大学资源与土木学院，辽宁沈阳110819)

修回日期:2021-09-30 接受日期:2021-09-30 发布日期:2022-11-07
通讯作者: 李明
作者简介:李明(1980-)，男，辽宁沈阳人，东北大学副教授; 梁力(1955-)，男，辽宁丹东人，东北大学教授，博士生导师.
基金资助:
中央高校基本科研业务费专项资金资助项目(N2001015)；国家留学基金资助项目(201906085021).

Study on Mesostructure Boundary Modeling and Hydraulic Fracture Propagation for Rock Material Based on the PHF-LSM-MT Method

LI Ming， ZHAO Qi， CHEN Zhao， LIANG Li

School of Resources & Civil Engineering， Northeastern University， Shenyang 110819， China.

Revised:2021-09-30 Accepted:2021-09-30 Published:2022-11-07
Contact: ZHAO Qi
About author:-
Supported by:
-

摘要/Abstract

摘要： 天然非均质岩石具有复杂的细观结构和分布特征，本文结合柏林噪声建立考虑非规则边界的颗粒几何模型，实现考虑任意粒径、长短半轴、倾角和平面填充率的非规则颗粒填充.基于完全流-固耦合弹塑性理论，在已有的PHF-LSM(permeability-based hydraulic fracture level set method)模型基础上，通过引入MT (Mori-Tanaka)均匀化方法考虑积分点有效范围内细观尺度的材料分布特征，进而建立了PHF-LSM-MT非均质岩石材料细观特征建模及其水力压裂过程模拟方法.结合误差分析验证了该方法的可行性，在此基础上对非均质岩石材料进行了水力压裂过程模拟，得到了等效开裂区域.模拟结果表明:注水点水压力呈先升高后降低的趋势，起裂压力随包裹体体积分数增加而降低.

关键词: 水力压裂；细观建模；柏林噪声；岩石材料界面；PHF-LSM

Abstract: Natural heterogeneous rock material has complex mesostructure and distribution characteristics. An approach to model inclusions with irregular boundary by using the Perlin noise， and considering features， e.g.， specific radius， semi-axial ratio， orientation angle and plane filling rate， is introduced. In order to include the mesostructure characteristics of rock material at integration point， the permeability-based hydraulic fracture level set method (PHF-LSM) is improved by introducing the Mori-Tanaka (MT) homogenization method based on a coupled fluid-solid elastoplastic theory. The proposed PHF-LSM-MT method is verified by error analysis. Finally， the propagation features of equivalent fracture zone in heterogeneous rock material were simulated by using the proposed method. The results indicate that the water pressure at injection point first increases and rapidly decreases， and the breakdown pressure decreases while the inclusion fraction increases.

Key words: hydraulic fracture; mesostructure modeling; Perlin noise; interface of rock material; PHF-LSM(permeability-based hydraulic fracture level set method)

中图分类号:

TV139.1
TE31

李明，赵岐，陈昭，梁力. 基于PHF-LSM-MT法岩石材料细观边界建模与水力裂缝扩展研究[J]. 东北大学学报（自然科学版）, 2022, 43(10): 1461-1468.

LI Ming， ZHAO Qi， CHEN Zhao， LIANG Li. Study on Mesostructure Boundary Modeling and Hydraulic Fracture Propagation for Rock Material Based on the PHF-LSM-MT Method[J]. Journal of Northeastern University(Natural Science), 2022, 43(10): 1461-1468.

参考文献

[1]Zhang J，Li Y W，Pan Y S，et al. Experiments and analysis on the influence of multiple closed cemented natural fractures on hydraulic fracture propagation in a tight sandstone reservoir［J］.Engineering Geology，2021，281:105981.
[2]Zhou Y，Yang D，Zhang X，et al.Numerical investigation of the interaction between hydraulic fractures and natural fractures in porous media based on an enriched FEM［J］.Engineering Fracture Mechanics，2020，235:107175.
[3]Linkov A M，Markov N S.Improved pseudo three-dimensional model for hydraulic fractures under stress contrast［J］.International Journal of Rock Mechanics and Mining Sciences，2020，130:104316.
[4]Liu C，Zhang J N，Yu H，et al.New insights of natural fractures growth and stimulation optimization based three-dimensional cohesive zone model［J］.Journal of Natural Gas Science and Engineering，2020，76:103165.
[5]Roostaei M，Taghipoor S，Nouri A，et al.Smeared modeling of hydraulic fracture using partially coupled reservoir and geomechanics simulators［J］.International Journal of Rock Mechanics and Mining Sciences，2019，113:99-111.
[6]Sun Y，Liu Z Y，Tang X H.A hybrid FEMM-phase field method for fluid-driven fracture propagation in three dimension［J］.Engineering Analysis with Boundary Elements，2020，113:40-54.
[7]Yan C Z，Zheng H，Sun G H，et al.Combined finite-discrete element method for simulation of hydraulic fracturing［J］.Rock Mechanics and Rock Engineering，2016，49(4):1389-1410.
[8]张国凯，李海波，夏祥，等.岩石细观结构及参数对宏观力学特性及破坏演化的影响［J］.岩石力学与工程学报，2016，35(7):1341-1352.(Zhang Guo-kai，Li Hai-bo，Xia Xiang，et al.Effects of microstructure and micro parameters on macro mechanical properties and failure of rock［J］.Chinese Journal of Rock Mechanics and Engineering，2016，35(7):1341-1352.)
[9]Li M，Guo P J，Dieter S，et al.Heterogeneous rock modeling method and characteristics of multistage hydraulic fracturing based on the PHF-LSM method［J］.Journal of Natural Gas Science and Engineering，2020，83:103518.
[10]Skala V.Barycentric coordinates computation in homogeneous coordinates［J］.Computer & Graphics，2008，32:120-127.
[11]Meng Q X，Wang H L，Xu W Y，et al.Numerical homogenization study on the effects of columnar jointed structure on the mechanical properties of rock mass［J］.International Journal of Rock Mechanics and Mining Sciences，2019，124:104127.
[12]Perlin K.An image synthesizer［J］.Computer & Graphics，1985，19(3):287-296.
[13]Zirwes T，Zhang F，Wang Y Q，et al.In-situ flame particle tracking based on barycentric coordinates for studying local flame dynamics in pulsating Bunsen flames［J］.Proceedings of the Combustion Institute，2021，38:2057-2066.
[14]李明，郭培军，李鑫，等.基于水平集法的非均质岩石建模及水力压裂传播特性研究［J］.岩土力学，2016，37(12):3591-3607.(Li Ming，Guo Pei-jun，Li Xin，et al.Modelling method of heterogeneous rock material based on level set method and hydraulic fracture propagation features［J］.Rock and Soil Mechanics，2016，37(12):3591-3607.)
[15]Barral M，Chatzigeorgiou G，Meraghni F，et al.Homogenization using modified Mori-Tanaka and TFA framework for elastoplastic-viscoelastic-viscoplastic composites:theory and numerical validation［J］.International Journal of Plasticity，2020，127:102632.
[16]Nguyen B N，Hou Z S，Last G V，et al.Three-dimensional analysis of a faulted CO₂ reservoir using an Eshelby-Mori-Tanaka approach to rock elastic properties and fault permeability［J］.Journal of Rock Mechanics and Geotechnical Engineering，2016，8:828-845.
[17]Strazzeri V，Karrech A，Elchalakani M.Micromechanics modelling of cement stabilized rammed earth［J］.Mechanics of Materials，2020，148:103540.
[18]Zhang H T，Zhu J M，Liu Y H，et al.Strength properties of jointed rock masses based on the homogenization method［J］.Acta Mechanica Solida Sinica，2012，25(2):177-185.
[19]Halpin J C，Kardos J L.Halpin-Tsai equations:areview［J］.Polymer Engineering and Science，1976，16(5):344-352.
[20]Corey A T.The interrelation between gas and oil relative permeabilities［J］.Producers Monthly，1954，19:38-41.

基于PHF-LSM-MT法岩石材料细观边界建模与水力裂缝扩展研究

Study on Mesostructure Boundary Modeling and Hydraulic Fracture Propagation for Rock Material Based on the PHF-LSM-MT Method

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 6

编辑推荐

Metrics

本文评价

[1]	李明，史艺涛，李鑫，梁力. 基于水平集法的三维非均质岩石建模及水力压裂特性[J]. 东北大学学报:自然科学版, 2019, 40(1): 109-114.
[2]	刘杰，赵兴东，温新亮. 地下水封储油洞库各向异性渗流特征的数值模拟[J]. 东北大学学报:自然科学版, 2015, 36(11): 1638-1642.
[3]	李明，梁力， GUO Pei-jun，李鑫. 弥散裂缝模型水力压裂数值方法的网格敏感性分析[J]. 东北大学学报:自然科学版, 2015, 36(9): 1337-1341.
[4]	李明，张砚琨，赵岐，梁力. 基于EPHF模型均质多孔岩石材料水力压裂特性[J]. 东北大学学报（自然科学版）, 2021, 42(7): 996-1004.
[5]	李明，赵岐，张砚琨，梁力. 基于PHF-LSM-MT的非均质岩石细观界面与水力压裂数值建模[J]. 东北大学学报（自然科学版）, 2021, 42(8): 1127-1135.
[6]	李明，陈昭，赵岐，梁力. 基于PHF-LSM模型岩石分段水力压裂应力阴影效应[J]. 东北大学学报（自然科学版）, 2022, 43(11): 1613-1622.