东北大学学报(自然科学版) ›› 2010, Vol. 31 ›› Issue (7): 957-961.DOI: -

• 论著 • 上一篇    下一篇

连续退火模拟实验机的模糊专家温度控制系统

崔席勇;花福安;李建平;张殿华;   

  1. 东北大学轧制技术及连轧自动化国家重点实验室;
  • 收稿日期:2013-06-20 修回日期:2013-06-20 出版日期:2010-07-15 发布日期:2013-06-20
  • 通讯作者: -
  • 作者简介:-
  • 基金资助:
    国家自然科学基金资助项目(50527402)

Expert system of fuzzy temperature control for continuous annealing simulator

Cui, Xi-Yong (1); Hua, Fu-An (1); Li, Jian-Ping (1); Zhang, Dian-Hua (1)   

  1. (1) The State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, China
  • Received:2013-06-20 Revised:2013-06-20 Online:2010-07-15 Published:2013-06-20
  • Contact: Cui, X.-Y.
  • About author:-
  • Supported by:
    -

摘要: 在连续退火模拟实验机温度控制系统的开发中,针对系统的非线性、时变性、变结构、多层次和大滞后等缺点,引入模糊专家系统的结构和理论基础,并结合实际调试过程中总结出的专家策略,即采用分段PID控制方法和动态变结构控制方法相结合的控制策略,建立了模糊专家温度控制系统.实验结果表明,该控制系统控制效果好,温度超调量小,针对不同尺寸规格试样的控制性能稳定,适用范围广,达到了冷轧带钢连续退火模拟实验机温度控制系统的设计性能指标.

关键词: 连续退火模拟实验机, 冷轧带钢, 控制系统, 模糊专家系统, 温度控制

Abstract: According to the disadvantages of the continuous annealing simulator's temperature control system, such as nonlinearity, time-varying, variable structure, multi-level and long time delays, an expert system of fuzzy temperature control was developed via introducing the structure and theoretical basis of fuzzy expert system in combination with some expert control strategies generalized from actual debugging process, i.e., combining the sectional PID control with dynamic structure-varying control. Testing results showed that the control system is effective with low temperature overshoot, steady controllability for the specimens of different sizes and wide scopes of applications. Thus, the temperature control system comes up to its performance indices designed for the continuous annealing simulator to cold strips.

中图分类号: