东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2010, Vol. 31 ›› Issue (6): 803-807.DOI: -

• 论著 • 上一篇    下一篇

Nb-Ti微合金化热轧多相钢的组织和性能

郑东升;朱伏先;张明亚;李艳梅;   

  1. 东北大学轧制技术及连轧自动化国家重点实验室;
  • 收稿日期:2013-06-20 修回日期:2013-06-20 出版日期:2010-06-15 发布日期:2013-06-20
  • 通讯作者: -
  • 作者简介:-
  • 基金资助:
    “十一五”国家科技支撑计划项目(2006BAE03A08)

On the microstructure and mechanical properties of hot-rolled Nb-Ti microalloyed multiphase steel

Zheng, Dong-Sheng (1); Zhu, Fu-Xian (1); Zhang, Ming-Ya (1); Li, Yan-Mei (1)   

  1. (1) The State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, China
  • Received:2013-06-20 Revised:2013-06-20 Online:2010-06-15 Published:2013-06-20
  • Contact: Zheng, D.-S.
  • About author:-
  • Supported by:
    -

RichHTML

1

PDF (PC)

771

摘要： 通过两阶段控轧和随后的三段冷却,获得了14mm厚的Nb-Ti微合金化热轧多相钢板.利用光学显微镜、扫描电镜、透射电镜、X射线衍射(XRD)、电子背散射衍射(EBSD)和力学性能测试等手段对其组织和性能进行了研究.结果表明,试验钢的显微组织由铁素体、贝氏体和少量马氏体组成;其平均屈服强度为518MPa,抗拉强度为616MPa,延伸率高达41%;组织中大量的铁素体大角度晶界、近似等轴状铁素体晶粒和较小尺寸贝氏体束的存在,大大提高了试验钢的塑性;铁素体和贝氏体组织的细化,细小的(Nb,Ti)C粒子以及铁素体晶粒和贝氏体板条内的位错提高了试验钢的强度.

关键词: Nb-Ti微合金钢, 热轧多相钢, 控轧控冷, 显微组织, 力学性能

Abstract: The 14mm-thick Nb-Ti microalloyed hot-rolled multiphase steel plate was developed by two-stage rolling and subsequent three-step cooling, then it was characterized by optical microscopy, SEM, TEM, XRD, EBSD (electron back-scattered diffraction) and other tests to investigate its microstructure and mechanical properties. The results indicated that the microstructure of the steel specimen is composed of ferrite, bainite and small amount of martensite, and that the mean yield strength, tensile strength and percentage elongation are 518MPa, 616MPa and 41%, respectively. The existence of lots of big-angle ferrite grain boundaries, near-equiaxial ferrite grains and small bainitic beams significantly improves the ductility. The refinement of ferrite grains and bainitic structures, fine (Nb, Ti)C particles and the dislocations in ferrite and lath bainite increase the strength.

中图分类号: