东北大学学报(自然科学版) ›› 2010, Vol. 31 ›› Issue (4): 515-518.DOI: -

• 论著 • 上一篇    下一篇

电磁引流系统的出钢效果分析

高翱;王强;金百刚;赫冀成;   

  1. 东北大学材料电磁过程研究教育部重点实验室;鞍山钢铁集团公司鞍钢股份有限公司;
  • 收稿日期:2013-06-20 修回日期:2013-06-20 出版日期:2010-04-15 发布日期:2013-06-20
  • 通讯作者: -
  • 作者简介:-
  • 基金资助:
    辽宁省科技厅科技攻关项目(2008221015);;

Effect analysis of a newly developed electromagnetic steel tapping system

Gao, Ao (1); Wang, Qiang (1); Jin, Bai-Gang (1); He, Ji-Cheng (1)   

  1. (1) Key Laboratory of Electromagnetic Processing of Materials, Northeastern University, Shenyang 110004, China; (2) Angang Steel Company Limited, Anshan Iron and Steel Group Corporation, Anshan 114021, China
  • Received:2013-06-20 Revised:2013-06-20 Online:2010-04-15 Published:2013-06-20
  • Contact: Gao, A.
  • About author:-
  • Supported by:
    -

摘要: 利用ANSYS有限元分析软件模拟了在电磁引流系统中用铁粒和碳粉混合物替代传统引流砂时上水口处1,3 h及稳态(时间无限长)的温度场分布,发现Fe/C混合物的温度由上向下逐渐降低,形成一定的温度梯度.在此基础上,验证了Fe/C混合物中的铁粒在一定的工艺参数下可以短时间内熔化,从而实现钢包的顺利出钢.验证了钢包耐火材料在电磁引流过程中可以满足工艺要求.提取了钢包底板的温度场分布,校验了钢包底部钢板在感应加热作用下的安全性.

关键词: 连铸, 感应加热, 电磁场, 数值模拟, 传热

Abstract: With the mixture of iron particles and carbon powder used instead of the conventional nozzle sand in the electromagnetic steel tapping system, the distribution of temperature field in nozzle upper was simulated for 1, 3?h and in steady state (infinite time) by the FEM software ANSYS. It was found that the temperature of the Fe/C mixture decreases gradually from top to bottom, thus forming a certain temperature gradient. Then, it was verified that the iron particles in the mixture can be melted quickly on certain process parameters so as to make sure that the operation of steel tapping from ladle is successful. How the ladle refractory meets the technological requirements in the electromagnetic steel tapping process was discussed. And the safety of the ladle bottom plate under the action of electromagnetic induction heating was checked via the distribution of temperature field on the plate.

中图分类号: