东北大学学报(自然科学版) ›› 2008, Vol. 29 ›› Issue (12): 1715-1717+1741.DOI: -

• 论著 • 上一篇    下一篇

冷轧薄带钢工作辊边部接触研究

赵启林;刘相华;王国栋;   

  1. 东北大学轧制技术及连轧自动化国家重点实验室;
  • 收稿日期:2013-06-22 修回日期:2013-06-22 出版日期:2008-12-15 发布日期:2013-06-22
  • 通讯作者: Zhao, Q.-L.
  • 作者简介:-
  • 基金资助:
    国家自然科学基金资助项目(50634030)

On the direct contact between work roll surfaces outside workpiece width during thin strip cold rolling

Zhao, Qi-Lin (1); Liu, Xiang-Hua (1); Wang, Guo-Dong (1)   

  1. (1) The State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, China
  • Received:2013-06-22 Revised:2013-06-22 Online:2008-12-15 Published:2013-06-22
  • Contact: Zhao, Q.-L.
  • About author:-
  • Supported by:
    -

摘要: 为研究工作辊接触对冷轧带钢生产的影响,用影响函数法建立模型,并用现场生产数据模拟计算了四辊轧机的辊系变形.通过计算得到的接触压力、带钢厚度、张应力等分布数据分析了冷轧薄带时发生工作辊接触现象对轧制压力、出口厚度、出口张应力以及板形等的影响.结果表明,工作辊接触使带钢边部轧制压力降低,工作辊与支撑辊间接触压力增大.工作辊接触使带钢凸度和横向厚差减小,对降低边部减薄有利;使出口张应力分布更加均匀,减小了边浪,提高了带钢的平直度.

关键词: 辊系变形, 影响函数法, 工作辊接触, 冷轧, 板形

Abstract: To investigate the influence of the direct contact between work roll surfaces outside workpiece width on thin strip cold rolling process, a simulation model was developed by means of influence function, with which the production data during rolling were taken to calculate the roll deformation on a four-high mill. Such distributive data as contact pressure, strip thickness and tensile stress were calculated to analyze the effect of work roll surface contact mentioned above on the distribution of rolling force, strip thickness, and tensile strength at exit and strip shape. It was found that when the work roll surface contact occurs, the rolling force decreases at the verge of strip, while the contact pressure between the surfaces of work roll and back-up roll increases at the end of back-up roll. The direct work roll contact enables both the strip crown and transverse thickness difference to decrease, thus resulting in thinning down the strip verge and it also makes the distribution of tensile stress at exit more uniform so as to improve strip shape and flatness.

中图分类号: