东北大学学报(自然科学版) ›› 2009, Vol. 30 ›› Issue (8): 1139-1142.DOI: -

• 论著 • 上一篇    下一篇

鞍钢铁矿石烧结基础性能研究

尚策;周明顺;翟立委;沈峰满;   

  1. 东北大学材料与冶金学院;鞍钢股份有限公司炼铁厂;
  • 收稿日期:2013-06-22 修回日期:2013-06-22 出版日期:2009-08-15 发布日期:2013-06-22
  • 通讯作者: Shen, F.-M.
  • 作者简介:-
  • 基金资助:
    国家自然科学基金资助项目(50474014)

Study on basic sintering properties of iron ores in ANSTEEL

Shang, Ce (1); Zhou, Ming-Shun (2); Zhai, Li-Wei (2); Shen, Feng-Man (1)   

  1. (1) School of Materials and Metallurgy, Northeastern University, Shenyang 110004, China; (2) Iron-Making Plant, Angang Steel Company Limited, Anshan 114009, China
  • Received:2013-06-22 Revised:2013-06-22 Online:2009-08-15 Published:2013-06-22
  • Contact: Shen, F.-M.
  • About author:-
  • Supported by:
    -

摘要: 利用微型烧结实验装置及烧结杯试验,对鞍钢铁矿粉的同化特性、液相固结强度、液相流动性及连晶能力等烧结特性进行综合评价.在此基础上,提出了烧结合理配矿原则,并应用到生产实践.研究结果表明,鞍钢烧结生产应以精矿B,D搭配精矿C为主,球团生产应以精矿A为主.配矿优化调整后,炼铁技术经济指标明显改善,高炉利用系数提高了0.043 t/(m3.d),入炉焦比降低了5.28 kg/t,烧结矿成本降低2.2元/t.

关键词: 铁矿石, 烧结矿, 基础性能, 合理配矿, 配矿试验

Abstract: The basic sintering properties of iron ores were investigated experimentally by miniature sintering setup and pot, and evaluated comprehensively, such as assimilability of iron concentrates, strength of liquid consolidation, fluidity of liquid phase, capability of crystal stock. Then, a rule of reasonable batching by weight for sintering was found and applied to practical production. The results showed that in the sintering process the batching mainly depends on the concentrates B and D mixed with C, while in the pelletizing process the concentrate A is principal in ANSTEEL. The ironmaking technical-economic indices are thus improved obviously after optimizing and readjusting the batching, e.g., the BF utilization coefficient increases by 0.043 (t/m3·d), and the coke ratio decreases by 5.28 kg/t with sinter cost being reduced by 2.2¥/t.

中图分类号: