东北大学学报(自然科学版) ›› 2009, Vol. 30 ›› Issue (5): 720-723.DOI: -

• 论著 • 上一篇    下一篇

数控车床主轴部件有限元分析及其验证

张耀满;王伟;刘永贤;   

  1. 东北大学机械工程与自动化学院;
  • 收稿日期:2013-06-22 修回日期:2013-06-22 出版日期:2009-05-15 发布日期:2013-06-22
  • 通讯作者: Zhang, Y.-M.
  • 作者简介:-
  • 基金资助:
    国家自然科学基金资助项目(50475052)

FEA of spindle assembly of NC lathe and its verification

Zhang, Yao-Man (1); Wang, Wei (1); Liu, Yong-Xian (1)   

  1. (1) School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110004, China
  • Received:2013-06-22 Revised:2013-06-22 Online:2009-05-15 Published:2013-06-22
  • Contact: Zhang, Y.-M.
  • About author:-
  • Supported by:
    -

摘要: 研究了主轴部件有限元动力学分析模型的建立方法,分析得到弹簧阻尼单元沿圆周方向布置角度的变化,对有限元分析结果影响很小,因此采用沿圆周方向均匀布置的弹簧阻尼单元模拟建立主轴支承模型的方法,确定了建立较为合理的分析模型.以沈阳第一机床厂生产的CKS6125数控车床为研究对象,对主轴部件进行动力学仿真分析.通过机床主轴部件动态性能试验,验证了有限元分析模型可行性和分析结果可信性.

关键词: 数控机床, 主轴部件, 有限元分析, 动态性能

Abstract: How to develop an FEA-based dynamic model of spindle assembly was investigated. The change in the central angles of equally and circularly arranged bearing supports of spring-damper elements around the spindle assembly has so small influence on FEA that the FEA-based dynamic model can be developed via developing a rational spindle-support model with those spring-damper elements. Exemplified with the CKS6125 NC lathe manufactured by Shenyang No.1 Plant of Machine Tools, a simulation was done to analyze dynamically the spindle assembly. And the dynamic performance tests of the spindle assembly verified the feasibility of the FEA-based model by experiments, after analysis and evaluation on its dynamic and the convincibility of FEA results.

中图分类号: