东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2004, Vol. 25 ›› Issue (1): 40-43.DOI: -

• 论著 • 上一篇    下一篇

低碳钢的高温力学性能

邸洪双;康向东;王国栋;刘相华   

  1. 东北大学轧制技术及连轧自动化国家重点实验室;东北大学轧制技术及连轧自动化国家重点实验室;东北大学轧制技术及连轧自动化国家重点实验室;东北大学轧制技术及连轧自动化国家重点实验室 辽宁沈阳　110004
  • 收稿日期:2013-06-24 修回日期:2013-06-24 出版日期:2004-01-15 发布日期:2013-06-24
  • 通讯作者: Di, H.-S.
  • 作者简介:-
  • 基金资助:
    国家自然科学基金资助项目(59995440);;国家重点基础研究发展规划项目(G2000067208-4);;辽宁省自然科学基金资助项目(2001101021)·

High temperature mechanical properties of low carbon steel

Di, Hong-Shuang (1); Kang, Xiang-Dong (1); Wang, Guo-Dong (1); Liu, Xiang-Hua (1)   

  1. (1) Lab. of Rolling and Automat., Northeastern Univ., Shenyang 110004, China
  • Received:2013-06-24 Revised:2013-06-24 Online:2004-01-15 Published:2013-06-24
  • Contact: Di, H.-S.
  • About author:-
  • Supported by:
    -

RichHTML

1

PDF (PC)

1885

摘要： 利用Gleeble 1500热模拟实验机,采用加热法和凝固法两种加热变形制度,研究了实验用低碳钢的热塑性及强度,测定了该钢种的零塑性温度(ZDT)θd及零强度温度(ZST)θs,分析了其裂纹敏感性及断口组织·结果表明,凝固法所测结果更符合实际;实验钢的高温脆性温度范围为1300℃至熔点,在1100～1300℃范围内,此钢的断面收缩率均大于60%,具有良好的塑性·实验用低碳钢的高温脆性区较小,具有较强的抗高温裂纹特性·其θd和θs分别为1350℃和1400℃·

关键词: 双辊铸轧, 薄带, 低碳钢, 高温力学性能, 零塑性温度, 零强度温度

Abstract: The hot ductility and strength of low carbon steel were studied by using Gleeble-1500 thermal stress/strain simulator according to the hot deformation schedules of heating and solidifying separately. θd and θs, zero ductility temperature (ZDT) and zero strength temperature (ZST) respectively, were measured. Meanwhile, crack sensitivity and fracture microscopic structure were analyzed. The results show that the measurements of solidifying method are closer to the actuality. The brittle temperature of tested steel is from 1350°C to melting point. The cross section contraction rate of the test steel is greater than 60% in the range from 1100-1300°C, which shows the steel has higher resistance to high temperature cracking. The θd and θs of the steel are 1350°C and 1400°C respectively.

中图分类号: