LIN Chao， CAO Xi-jun， WANG Yao， XU Ping. Normal Error of Tooth Surface Measurement and Analysis of Orthogonal Fluctuating Gear Ratio Face Gear[J]. Journal of Northeastern University Natural Science, 2015, 36(11): 1658-1662.
[1]Lin C，Gong H，Nie N，et al.Geometry design three-dimensional modeling and kinematic analysis of orthogonal fluctuating gear ratio face gear drive［J］.Part C:Journal of Mechanical Engineering Science，2013，227 (4):779-793. [2]唐德威，邓宗全，于红英，等.非圆齿轮的测绘设计方法研究［J］.哈尔滨工业大学学报，2005，37(5):581-583.(Tang De-wei，Deng Zong-quan，Yu Hong-ying，et al.Study on mapping design method of non-circular gear［J］.Journal of Harbin Institute of Technology，2005，37(5):581-583.) [3]Guenther A.Interpretation of bevel gear topography measurements［J］.CIRP Annals - Manufacturing Technology，2011，60(1):551-554. [4]Suh S H，Lee E S，Kim H C，et al.Geometric error measurement of spiral bevel gears using a virtual gear model for STEP-NC［J］.International Journal of Machine Tools & Manufacture，2002，42(3):335-342. [5]José S，Gerardo R，Sergio P，et al.Geometrical principles for analysing hypoidal gears in coordinate measuring machines:involutometry，protocols，data interpretation ［J］.Measurement，2012，45(10):2368-2375. [6]林超，曾庆龙，聂玲，等.高阶椭圆锥齿轮齿距误差的三坐标测量方法［J］.重庆大学学报:自然科学版，2013，36(10):1-7.(Lin Chao，Zen Qin-long，Nie Ling，et al.Pitch error measurement of high-order oval bevel gear on three dimensional measuring maching［J］.Journal of Chongqing University:Natural Science，2013，36(10):1-7.) [7]Litvin F L，Faydor L.Gear geometry and applied theory［M］.New York:Cambridge University Press，2004. [8]Faydor L L，Alfonso F，Claudio Z，et al.Face-gear drive with spur involute pinion:geometry，generation by a worm，stress analysis［J］.Computer Methods in Applied Mechanics and Engineering，2002，191(25):2785-2813. [9]王亚平，郑彦龙.三维测量软件系统中坐标系的建立方法［J］.工业计量，2004，14(6):27-30.(Wang Ya-ping，Zheng Yan-long.Creation method of coordinate system in 3- D measuring software system［J］.Industrial Measurement，2004，14(6):27-30.) [10]Anke G，Karin K，Frank H，et al.Introduction of a new bevel gear measurement standard［J］.CIRP Annals - Manufacturing Technology，2013，62(1):515-518.
