Damage Tolerance and Remain Fatigue Life Evaluation of Shattered Rim of EMU Wheels
CONG Tao1,2， CHEN Gang3， WU Si2， ZHAO Sa2
1. School of Mechanical， Electronic and Control Engineering， Beijing Jiaotong University， Beijing 100044， China; 2. Metals and Chemistry Research Institute， China Academy of Railway Sciences Corporation Limited， Beijing 100081， China; 3. Baowu Group Masteel Rail Transit Materials Technology Company Limited， Maanshan 243021， China.
CONG Tao， CHEN Gang， WU Si， ZHAO Sa. Damage Tolerance and Remain Fatigue Life Evaluation of Shattered Rim of EMU Wheels[J]. Journal of Northeastern University(Natural Science), 2022, 43(12): 1740-1747.
[1]Kabo E.Material defects in rolling contact fatigue influence of overloads and defect clusters［J］.International Journal of Fatigue，2002，24(8):887-894. [2]Ekberg A，Kabo E.Fatigue of railway wheels and rails under rolling contact and thermal loading—an overview［J］.Wear，2005，258(7/8):1288-1300. [3]Lansler E，Kabo E.Subsurface crack face displacements in railway wheels［J］.Wear，2005，258(7/8):1038-1047. [4]Ekberg A，Kabo E，Nielsen J C O，et al.Subsurface initiated rolling contact fatigue of railway wheels as generated by rail corrugation［J］.International Journal of Solids and Structures，2007，44(24):7974-7987. [5]Bevan A，Molyneux-Berry P，Eickhoff B.Development and validation of a wheel wear and rolling contact fatigue damage model［J］.Wear，2013，307(1/2):100-111. [6]Li S X.Effects of inclusions on very high cycle fatigue properties of high strength steels［J］.International Materials Reviews，2012，57(2):92-114. [7]Cong T，Han J M，Hong Y S，et al.Shattered rim and shelling of high-speed railway wheels in the very-high-cycle fatigue regime under rolling contact loading［J］.Engineering Failure Analysis，2019，97:556-567. [8]高彩茹，朱长友，张大伟，等.车轮轮辐钢S500LF的疲劳性能［J］.东北大学学报(自然科学版)，2020，41(8):1148-1152.(Gao Cai-ru，Zhu Chang-you，Zhang Da-wei，et al.Fatigue property of spoke steel S500LF［J］.Journal of Northeastern University(Natural Science)，2020，41(8):1148-1152.) [9]Ekberg A，Kabo E，Andersson H.An engineering model for prediction of rolling contact fatigue of railway wheels［J］.Fatigue Fracture of Engineering Materials and Structrues，2002，25:899-909. [10]丛韬.铁路车轮超高周疲劳行为研究和寿命评估方法［D］.北京:北京交通大学，2019.(Cong Tao.Study on the very-high-cycle fatigue behavior of railway wheels and fatigue life assessment method［D］.Beijing:Beijing Jiaotong University，2019.) [11]Irwin G R.Discussions:″analysis of stresses and strains near the end of a crack traversing a plate″［J］.Journal of Applied Mechanics，1957，24:361-364. [12]赵诒枢.最大能量释放率断裂准则在Ⅱ-Ⅲ和Ⅰ-Ⅱ-Ⅲ复合型断裂中的应用［J］.力学与实践，1985(3):20-22.(Zhao Yi-shu.The application of maximum energy release rate criteria in the fracture caused by mixed mode II-III and I-II-III cracks［J］.Mechanics and Engineering，1985(3):20-22.)(上接第1739页) [5]Lei Y G，Lin J，Zuo M J，et al.Condition monitoring and fault diagnosis of planetary gearboxes:a review［J］.Measurement，2014，48(1):292-305. [6]Hammami A，Alfonso F D R，Chaari F，et al.Effects of variable loading conditions on the dynamic behaviour of planetary gear with power recirculation［J］.Measurement，2016，94(6):306-315. [7]Parra J，Vicuna C M.Two methods for modeling vibrations of planetary gearboxes including faults:comparison and validation［J］.Mechanical Systems and Signal Processing，2017，92(4):213-225. [8]Xue S，Howard I.Torsional vibration signal analysis as a diagnostic tool for planetary gear fault detection［J］.Mechanical Systems and Signal Processing，2018，100(1):706-728. [9]马辉，段田堂，孙衍宁，等.齿顶修形行星轮系啮合刚度分析［J］.东北大学学报(自然科学版)，2019，40(3):380-385.(Ma Hui，Duan Tian-tang，Sun Yan-ning，et al.Mesh stiffness analysis of planetary gear system with gear tip relief［J］.Journal of Northeastern University(Natural Science)，2019，40(3):380-385.) [10]Chen Z G，Zhu Z F，Shao Y M.Fault feature analysis of planetary gear system with tooth root crack and flexible ring gear rim［J］.Engineering Failure Analysis，2015，49(2):92-103. [11]Wan Z G，Cao H R，Zi Y Y，et al.An improved time-varying mesh stiffness algorithm and dynamic modeling of gear-rotor system with tooth root crack［J］.Engineering Failure Analysis，2014，42(4):157-177. [12]张子明，杜成斌，周星德.结构动力学［M］.北京:清华大学出版社，2008:88-90.(Zhang Zi-ming，Du Cheng-bin，Zhou Xing-de.Dynamics of structures［M］.Beijing:Tsinghua University Press，2008:88-90.) [13]Parker R G，Lin J.Mesh phasing relationships in planetary and epicyclic gears［J］.Journal of Mechanical Design，2004，126(2):365-370. [14]Feng Z P，Zuo M J.Vibration signal models for fault diagnosis of planetary gearboxes［J］.Journal of Sound and Vibration，2012，331(22):4919-4939.
