RAO Hong-yan， WANG Shao-jie， HOU Liang， SU De-ying. Global Power Matching of Concrete Pump Truck Based on Advanced Particle Swarm Optimization Algorithm[J]. Journal of Northeastern University(Natural Science), 2023, 44(6): 840-848.
[1]Guo X R，Wu H K，Chen D S，et al.Estimation and prediction of pollutant emissions from agricultural and construction diesel machinery in the(BTH) region，China［J］.Environmental Pollution，2020，260(5):113973-113983. [2]Wang H，Wang Q.Parameter matching and control of series hybrid hydraulic excavator based on electro-hydraulic composite energy storage［J］.IEEE Access，2020，8(6):111899-111912. [3]Li T Y，Huang L T，Liu H Y.Energy management and economic analysis for a fuel cell supercapacitor excavator［J］.Energy，2019，172(4):840-851. [4]Guo T，Lin T L.Research on constant power control strategy of pure electric excavator［J］.Applied Sciences Basel，2020，10(21):7599. [5]Ge L，Quan L，Zhang X G，et al.Efficiency improvement and evaluation of electric hydraulic excavator with speed and displacement variable pump［J］.Energy Conversion and Management，2017，150(20):62-71. [6]Yasutaka T，Ryugasaki K N.Engine speed control system for construction machine: 617612681［P］.2001-11-15. [7]滕然伟.混凝土泵智能控制系统的研究与设计［D］.武汉:华中科技大学，2005.(Teng Ran-wei.Research and design for the intelligent control of a concrete pump［D］.Wuhan: Huazhong University of Science and Technology，2005.) [8]Hakgu K，Seungjin Y，Sungwoo C，et al.Hybrid control algorithm for fuel consumption of a compound hybrid excavator［J］.Automation in Construction，2016，68(8):1-10. [9]王冬云，管成，潘双夏，等.液压挖掘机功率匹配与动力源优化综合控制策略［J］.农业机械学报，2009，40(4):91-95.(Wang Dong-yun，Guan Cheng，Pan Shuang-xia，et al.Control strategy of power matching and power sources optimization for hydraulic excavators［J］.Transactions of the Chinese Society for Agricultural Machinery，2009，40(4):91-95.) [10]彭天好，杨华勇，傅新.液压挖掘机全局功率匹配与协调控制［J］.机械工程学报，2001，37(11):50-53.(Peng Tian-hao，Yang Hua-yong，Fu Xin.Global power matching and coordination control of hydraulic excavator［J］.Journal of Mechanical Engineering，2001，37(11):50-53.) [11]郭艳萍，郝敏，王旭，等.混凝土泵车节能控制系统研究开发［J］.现代信息科技，2018，2(7):168-170.(Guo Yan-ping，Hao Min，Wang Xu，et al.Research and development of energy saving control system for concrete pump truck［J］.Modern Information Technology，2018，2(7):168-170.) [12]夏益民，石鹏飞，赵宇峰，等.混凝土泵车节能技术分析与研究［J］.机械研究与应用，2014，27(3):20-22.(Xia Yi-min，Shi Peng-fei，Zhao Yu-feng，et al.Analysis and research of energy saving technology for concrete pump truck［J］.Mechanical Research and Application，2014，27(3):20-22.) [13]秦丽敏.混凝土泵车动态规划匹配节能机理研究［D］.西安:长安大学，2017.(Qin Li-min.Research on energy saving mechanism of dynamic programming matching of concrete pump truck［D］.Xi’an: Changan University，2017.) [14]揭琳锋，李悦，刘洪庆，等.混凝土泵车泵送作业节能控制策略［J］.工程机械，2010，41(12):20-23.(Jie Lin-feng，Li Yue，Liu Hong-qing，et al.An energy saving control strategy for pumping operation of concrete pump trucks［J］.Construction Machinery and Equipment，2010，41(12):20-23.) [15]Ye M，Yi X G，Jiao S J.Energy optimization by parameter matching for a truck-mounted concrete pump［J］.Energy Procedia，2016，88(6):574-580. [16]Chen Q H，Lin T L，Ren H L.Parameters optimization and control strategy of power train systems in hybrid hydraulic excavators［J］.Mechatronics，2018，56(6):16-25. [17]Yang X，Liu L.A multi-objective bus rapid transit energy saving dispatching optimization considering multiple types of vehicles［J］.IEEE Access，2020，8:79459-79471. [18]Soni B，Roy S，Warsi S.Particle swarm optimization in bioinformatics，image processing，and computational linguistics［J］.International Journal of Swarm Intelligence Research，2021，12(4):25-44. [19]Kennedy J，Eberhart R.Particle swarm optimization［C］//International Conference Neural Networks.［s.l.］:IEEE 1995:1942-1948. [20]Guo J，Wang B.Particle swarm optimization with gaussian disturbance［C］//International Conference on Industrial Informatics-Computing Technology Intelligent Industrial Information Integration.Wuhan: IEEE，2017: 266-269. [21]Khan T A，Lin S H，Mohan A S.Advanced particle swarm optimization algorithm with improved velocity update strategy［C］//IEEE International Conference on Systems，Man，and Cybernetics.Miyazaki: IEEE，2018: 3944-3949. [22]Xie H B，Chen J，Liu F，et al.Analysis and optimization of pressure shock and cylinder stroke deviation in open circuit hydraulic system of concrete pump［J］.Journal of the Chinese Society of Mechanical Engineers，2018，39(2):153-161. [23]马昌训.混凝土泵车泵送液压系统故障仿真研究［D］.长沙:中南大学，2011.(Ma Chang-xun.Research on fault simulation of pumping hydraulic system of concrete pump truck［D］.Changsha: Central South University，2011.) [24]杨柳.混凝土泵车泵送压力动态特性分析与实验研究［D］.重庆:重庆大学，2019.(Yang Liu.Analysis and experimental study on dynamic characteristics of pumping pressure of concrete pump truck［D］.Chongqing: Chongqing University，2019.) [25]Morinaga S.Pump ability of concrete and pumping pressure in pipelines［C］//Proceedings of RILEM Seminar.Leeds: University of Leeds，1973:1-39. [26]Zhang W X，Lu X T，Fang R，et al.Calculation model including time-varying coefficients for calculating the lateral pressure of bottom-up pumping self-compacting concrete［J］.Construction and Building Materials，2022，315(1):125672-125687. [27]中华人民共和国住房和城乡建设部.混凝土泵送施工技术规程: JGJ/T10—2011［S］.北京: 中国建筑工业出版社，2011.(Ministry of Housing and Urban-Rural Development of the People’s Republic of China.Technical specification for concrete pumping construction: JGJ/T10—2011［S］.Beijing: China Construction Industry Press，2011.)(上接第815页) [6]Min C S，Young H M.Coupled electromagnetic and thermal analysis of induction heating for the forging of marine crank-shafts［J］.Applied Thermal Engineering，2016，98:98-109. [7]Han Y，Yu E L，Zhang H L，et al.Numerical analysis on the medium-frequency induction heat treatment of welded pipe［J］.Applied Thermal Engineering，2013，51(1/2):212-217. [8]Yu C，Xiao H，Qi Z C，et al.Finite element analysis and experiment on induction heating process of slab continuous casting-direct rolling［J］.Metallurgical Research & Technology，2019，116(4):403-502. [9]Barglik J，Smagor A，Smalcerz A，et al.Induction heating of gear wheels in consecutive contour hardening process［J］.Energies，2021，14(13):3885-3899. [10]Barglik J，Ducki K，Kuc D，et al.Hardness and microstructure distributions in gear wheels made of steel AISI 4340 after consecutive dual frequency induction hardening［J］.International Journal of Applied Electromagnetics and Mechanics，2020，63(sup1):131-140. [11]Su Y H，Oikawa K，Shinohara T，et al.Neutron bragg-edge transmission imaging for microstructure and residual strain in induction hardened gears［J］.Scientific Reports，2021，11(1):4155-4169. [12]Bioul F，Dupret F.Application of asymptotic expansions to model two-dimensional induction heating systems.part I:calculation of electromagnetic field distribution［J］.IEEE Transactions on Magnetics，2005，41(9):2496-2505. [13]Dughiero F，Forzan M.3D solution of electromagnetic and thermal coupled field-problems in the continuous transverse flux heating of metal strips［J］.IEEE Transactions on Magnetics，1997，33(2):2147-2150. [14]Luo J，Shih A J.Inverse heat transfer solution of the heat flux due to induction heating［J］.Journal of Manufacturing Science and Engineering，2004，127(3):555-563. [15]Xu W，Ding W F，Zhu Y J，et al.Investigation on heating temperature characteristics during rotating induction brazing of monolayer CBN grinding wheels:numerical simulation and experimental verification［J］.International Journal of Applied Electromagnetics and Mechanics，2017，53(4):697-713. [16]周丹，梁丰瑞，王天琪，等.高强度球扁钢感应加热有限元模拟与工艺优化［J］.中国冶金，2019，29(8):45-51.(Zhou Dan，Liang Feng-rui，Wang Tian-qi，et al.Finite element simulation and process optimizing of induction heating for high strength bulb flat steel［J］.China Metallurgy，2019，29(8):45-51.) [17]肖瑶，牛身身，韩毅，等.高频直缝焊管中频热处理参数分析［J］.钢铁，2021，56(5):113-121.(Xiao Yao，Niu Shen-shen，Han Yi，et al.Analysis of intermediate frequency heat treatment parameters on high frequency straight welded pipe［J］.Iron and Steel，2021，56(5):113-121.) [18]Cho K H.Coupled electro-magneto-thermal model for induction heating process of a moving billet［J］.International Journal of Thermal Sciences，2012，60:195-204. [19]Yun J O，Yang Y S.Analysis of the induction heating for moving inductor coil［J］.Journal of Mechanical Science and Technology，2006，20(8):1217-1223.
