Journal of Northeastern University(Natural Science) ›› 2024, Vol. 45 ›› Issue (5): 636-642.DOI: 10.12068/j.issn.1005-3026.2024.05.004
• Materials & Metallurgy • Previous Articles
Hang SUN1, Wei CHEN2, Chang LUO2, Chang-sheng LIU1
Received:
2022-12-12
Online:
2024-05-15
Published:
2024-07-31
CLC Number:
Hang SUN, Wei CHEN, Chang LUO, Chang-sheng LIU. Microstructure and Properties of Tempered High Vanadium Semi High Speed Steel Alloy Cladding Layer[J]. Journal of Northeastern University(Natural Science), 2024, 45(5): 636-642.
材料 | C | Si | Mn | Cr | Ni | Mo | V | Fe |
---|---|---|---|---|---|---|---|---|
基体 | 0.74 | 0.70~0.90 | 0.25~0.45 | 5.00~5.50 | 0.25 | 0.96 | 0.40 | 余量 |
半高速钢合金粉末 | 0.74 | — | — | — | — | — | 1.60 | 余量 |
Table 1 The composition of roller alloy steel and high vanadium semi high speed steel alloy powder
材料 | C | Si | Mn | Cr | Ni | Mo | V | Fe |
---|---|---|---|---|---|---|---|---|
基体 | 0.74 | 0.70~0.90 | 0.25~0.45 | 5.00~5.50 | 0.25 | 0.96 | 0.40 | 余量 |
半高速钢合金粉末 | 0.74 | — | — | — | — | — | 1.60 | 余量 |
点 | C | Fe | V | Cr | Mo | Si |
---|---|---|---|---|---|---|
1 | 21.60 | 48.54 | 6.73 | 8.95 | 13.72 | 0.47 |
2 | 24.80 | 33.20 | 4.34 | 15.88 | 21.37 | 0.41 |
3 | 2.59 | 85.66 | 0.55 | 4.54 | 3.34 | 0.33 |
Table 2 Analysis results of carbides in figure 5c (mass fraction)
点 | C | Fe | V | Cr | Mo | Si |
---|---|---|---|---|---|---|
1 | 21.60 | 48.54 | 6.73 | 8.95 | 13.72 | 0.47 |
2 | 24.80 | 33.20 | 4.34 | 15.88 | 21.37 | 0.41 |
3 | 2.59 | 85.66 | 0.55 | 4.54 | 3.34 | 0.33 |
样品 | 磨痕宽度/mm | 磨损体积/mm3 | 磨损率/(mm3·N-1·m-1) | 最大摩擦系数 |
---|---|---|---|---|
基体 | 1.865 | 1.112 89 | 154.567×10-6 | 0.783 |
熔覆层 | 0.656 | 0.044 42 | 6.142×10-6 | 0.708 |
Table 3 Friction and wear test results of laser cladding layer
样品 | 磨痕宽度/mm | 磨损体积/mm3 | 磨损率/(mm3·N-1·m-1) | 最大摩擦系数 |
---|---|---|---|---|
基体 | 1.865 | 1.112 89 | 154.567×10-6 | 0.783 |
熔覆层 | 0.656 | 0.044 42 | 6.142×10-6 | 0.708 |
1 | Meng L, Zhu B B, Xian C,et al.Comparison on the wear properties and rolling contact fatigue damage behaviors of rails by laser cladding and laser‐induction hybrid cladding[J].Wear,2020,458/459:203421. |
2 | Zhang S H, Zhang G L, Liu J S,et al.A fast rigid‐plastic finite element method for online application in strip rolling[J].Finite Elements in Analysis and Design,2010,46(12):1146-1154. |
3 | Kanematsu W.A review of rolling contact fatigue behavior of silicon nitride focusing on testing practices and crack propagation analysis[J].Wear,2018,400/401:10-20. |
4 | 白万真,魏世忠,龙锐,等.冷轧辊典型失效形式分析综述[J].铸造技术,2006,27(9):1010-1014. |
Bai Wan‐zhen, Wei Shi‐zhong, Long Rui,et al.Analysis and review on typical failure forms of cold roll[J].Foundry Technology,2006,27(9):1010-1014. | |
5 | Qu H W, Liao B, Liu L G,et al.Precipitation rule of carbides in a new high speed steel for rollers[J].Calphad,2012,36:144-150. |
6 | Zhu H T, Zhu Q, Tieu A K,et al.A Simulation of wear behaviour of high‐speed steel hot rolls by means of high temperature pin‐on‐disc tests[J].Wear,2013,302(1/2):1310-1318. |
7 | 宫开令,高春利,张自立.半高速钢轧辊材料性能的研究[J].轧钢,2003(6):22-24. |
Gong Kai‑ling, Gao Chun‑li, Zhang Zi‑li.Research of performance of easy‐cut high speed of roll[J].Steel Rolling,2003(6):22-24. | |
8 | 吴琼,孙大乐.半高速钢冷轧辊材料的锻后淬火工艺[J].钢铁,2011,46 (8):68-72,77. |
Wu Qiong, Sun Da‐le.Ausform hardening process of semi‐HSS cold forged roll materials[J].Iron & Steel,2011,46 (8):68-72,77. | |
9 | 鲁莎,郭秋娟,田明艳.半高速钢轧辊显微组织和碳化物类型研究[J].大型铸锻件,2017(2):4-6,49. |
Lu Sha, Guo Qiu‑juan, Tian Ming‑yan.Study on the microstructure and carbide types of semi‑high speed steel roll[J].Heavy Casting and Forging,2017(2):4-6,49. | |
10 | Zhu L D, Xue P S, Qing L,et al.Recent research and development status of laser cladding:A review[J].Optics & Laser Technology,2021,138:106915. |
11 | Selvaraj K S, Prasad S K, Yasin S Y,et al.Additive manufacturing of dental material parts via laser melting deposition:a review,technical issues,and future research directions[J].Journal of Manufacturing Processes,2022,76:67-78. |
12 | Liu Y, Yang J J, Yang H,et al.Cu‐bearing 316L stainless steel coatings produced by laser melting deposition:microstructure and corrosion behavior in simulated body fluids[J].Surface and Coatings Technology,2021,428:127868. |
13 | 王彦芳,赵晓宇,陆文俊,等.抽油杆接箍表面高速激光熔覆不锈钢涂层的组织与性能[J].中国激光,2021,48(6):175-184. |
Wang Yan‐fang, Zhao Xiao‐yu, Lu Wen‐jun,et al.Microstructure and properties of high speed laser cladding stainless steel coating on sucker rod coupling[J].Chinese Journal of Lasers,2021,48(6):175-184. | |
14 | Rahman N U, Rooij M B D, Matthews D T A,et al.Wear characterization of multilayer laser cladded high speed steels[J].Tribology International,2019,130:52-62. |
15 | Hashemi N, Mertens A, Montrieux H M,et al.Oxidative wear behaviour of laser clad high speed steel thick deposits:influence of sliding speed,carbide type and morphology[J].Surface & Coatings Technology,2017,315:519-529. |
16 | Wang M J, Wang Y, Sun F F.Tempering behavior of a semi‐high speed steel containing nitrogen[J].Materials Science and Engineering A,2006,438/439/440:1139-1142. |
17 | 葛永胜,朱国芳,王成辉,等.半高速钢轧辊的锻造工艺研究[J].大型铸锻件,2006(2):1-3. |
Ge Yong‐sheng, Zhu Guo‐fang, Wang Cheng‐hui,et al.The forging process of semi‐high speed steel roll[J].Heavy Casting and Forging,2006(2):1-3. | |
18 | 尹钟大,刘德富,徐德祥,等.冷轧工作辊用半高速钢的二次硬化效应[J].钢铁,2006,41(2):72-75. |
Yi Zhong‐da, Liu De‐fu, Xu De‐xiang,et al.Secondary hardening of semi high speed steel for cold work rolls[J].Iron & Steel,2006,41(2):72-75. | |
19 | Wei S Z, Zhu J H, Xu L J.Effects of vanadium and carbon on microstructures and abrasive wear resistance of high speed steel[J].Tribology International,2006,39(7):641-648. |
20 | Zhao Z Z, Cao Y L, Wan X L,et al.Effect of cooling rate on carbide characteristics of the high vanadium high‐speed steel[J].ISIJ International,2022,62(3):524-531. |
21 | Cao Y L, Zhao Z R, Wan X L.Carbide characteristics of high vanadium high‐speed steel manufactured by electroslag remelting[J].ISIJ International,2022,62(7):1430-1438. |
22 | Rahman N U, Capuano L, Cabeza S,et al.Directed energy deposition and characterization of high‑carbon high speed steels[J].Additive Manufacturing,2019,30:100838. |
[1] | Jin-zhe JIANG, Yue LIU, Chun-ming LIU. Regulation of Secondary Carbide Characteristics and Its Effect on Wear Resistance of High Carbon High Alloy Martensitic Steel [J]. Journal of Northeastern University(Natural Science), 2024, 45(4): 490-498. |
[2] | Da-zeng SUN, Wen ZHAO, Xing-liang XU, Xin WANG. Microscopic Failure Characteristics of Sandstones with Different Composition and Microstructures [J]. Journal of Northeastern University(Natural Science), 2024, 45(4): 584-591. |
[3] | Wen-bo YAO, Chen LIU, Shuo SHANG, Chang-sheng LIU. Microstructure and Properties of Laser Cladding Fe‐Al Alloy at Different Scanning Speeds [J]. Journal of Northeastern University(Natural Science), 2024, 45(2): 170-178. |
[4] | LIU Jun-ru, ZHANG Guo-hua, ZHOU Guo-zhi. Effect of w(Fe)/w(Ni) Ratio on Mo2FeB2 Based Cermet [J]. Journal of Northeastern University(Natural Science), 2023, 44(9): 1269-1278. |
[5] | ZHANG Ya-jing, WANG Jin-peng, CHEN Xin, WU Hang-yu. Preparation and Properties of Biodegradable Zn-3Cu-xMn Alloys [J]. Journal of Northeastern University(Natural Science), 2023, 44(8): 1104-1110. |
[6] | WANG Ming-kun, LUO Zong-an, ZENG Zhou-yu, XIE Guang-ming. Effect of Heat Treatment on Microstructure and Mechanical Properties of Super Austenitic Stainless Steel Clad Plate [J]. Journal of Northeastern University(Natural Science), 2023, 44(6): 777-783. |
[7] | WANG Hai-tao, LI Jia-dong, DENG Xiang-tao, WANG Zhao-dong. Effect of Solution Temperature on Microstructure and Mechanical Properties of Fe-20Mn-9Al-1.2C Low-Density Steel [J]. Journal of Northeastern University(Natural Science), 2023, 44(5): 609-616. |
[8] | WANG Zhen, JIANG Mao-fa, LIU Cheng-jun, MIN Yi. Microstructure Analysis of Mold Flux of Cao-SiO2-Al2O3-Na2O-MgO System for Ingot Casting [J]. Journal of Northeastern University(Natural Science), 2023, 44(4): 517-523. |
[9] | WEN Xue-long, WANG Cheng-bao, LIU Wen-bo, REN Hai-yang. Experimental Study on the Microstructure of FeCoNiCr High-Entropy Alloys by Selective Laser Melting [J]. Journal of Northeastern University(Natural Science), 2023, 44(4): 536-543. |
[10] | JIA Peng, ZHU Peng-cheng, LI Bo, MAO Song-ze. Experimental Study on Wave Characteristics and Acoustic Emission Characteristics of Thermal Damaged Marble [J]. Journal of Northeastern University(Natural Science), 2023, 44(2): 279-288. |
[11] | LI Hui-jie, WEI Hao, XU Xiao-ning, YE Qi-bin. Microstructure Characteristics and Strengthening Mechanism of Ultrafine-Grain Low-Carbon Steel Prepared by Gradient-Structure Intermediate Billet [J]. Journal of Northeastern University(Natural Science), 2023, 44(11): 1578-1584. |
[12] | ZHI Wei-jun , YAO Zan, JIANG Zhou-hua. Microstructure Evolution of High Carbon Galvanized Steel Wire and Effect on Torsional Property [J]. Journal of Northeastern University(Natural Science), 2023, 44(1): 49-54. |
[13] | DONG Yan-wu, PENG Fei, TIAN Jia-long, JIANG Zhou-hua. Effect of Aging Treatment on Microstructure and Mechanical Properties of 10Ni10Mn2CuAl Steel [J]. Journal of Northeastern University(Natural Science), 2022, 43(5): 646-651. |
[14] | ZHI Wei-jun , YAO Zan, JIANG Zhou-hua. Research on Fine Characterization of Microstructure Difference of High Carbon Galvanized Steel Wire [J]. Journal of Northeastern University(Natural Science), 2022, 43(4): 501-508. |
[15] | SONG Hong-yu, LIU Hai-tao, WANG Guo-dong. Hot Rolling Twinning Behavior of Strip Casting Grain-Oriented Silicon Steel [J]. Journal of Northeastern University(Natural Science), 2022, 43(2): 182-187. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||