ZHANG Guang-ji, LIU Xiang-hua, HU Xian-lei, ZHI Ying. Research on Variation of Work Piece Horizontal Velocity for Variable Gauge Rolling[J]. Journal of Northeastern University:Natural Science, 2013, 34(1): 75-79.
[1]Fumimaru K,Kazuyki M,Tadashi O,et al.Steel plates for bridge use and their application technologies[J].JFE Technical Report,2004(2):85-89. [2]Suzuki S,Muraoka R,Obinata T,et al.Steel products for shipbuilding[J].JFE Technical Report,2004(2):41-46. [3]Meyer A,Wietbrock B,Hirt G.Increasing of the drawing depth using tailor rolled blanks-numerical and experimental analysis[J].International Journal of Machine Tools and Manufacture,2008,48(5):522-531. [4]Liu X H.Prospects for variable gauge rolling:technology,theory and application[J].Journal of Iron and Steel Research International,2011,18(1):1-4. [5]刘相华,张广基.变厚度轧制力平衡微分方程研究[J].钢铁研究学报,2012,24(4):10-14.(Liu Xiang-hua,Zhang Guang-ji.Force equilibrium differential equations for variable gauge rolling[J].Journal of Iron and Steel Research,2012,24(4):10-14.) [6]Zhang G J,Liu X H.Research on roll force for variable gauge rolling[J].Advanced Materials Research,2012,418/419/420:1232-1236. [7]方智.差厚板的轧制速度及轧制微跟踪模型研究[D].沈阳:东北大学,2010.(Fang Zhi.Rolling speed and model for micro-tracking of tailor rolled blank[D].Shenyang:Northeastern University,2010.) [8]杜平,胡贤磊,王君,等.变截面轧制过程的多点动态设定[J].钢铁研究学报,2009,21(11):27-31.(Du Ping,Hu Xian-lei,Wang Jun,et al.Mechanism research and experiment of multiple-point dynamic setup for variable cross-section rolling process[J].Journal of Iron and Steel Research,2009,21(11):27-31.) [9]Liu X H,Wu Z Q,Fang Z,et al.From TRB and LP plate to variable gauge rolling:technology,theory,simulation and experiment[J].Materials Science Forum,2012,706/707/708/709:1448-1453. [10]孙小平,秦建平.轧制理论[M].北京:冶金工业出版社,2006:54-58.(Sun Xiao-ping,Qin Jian-ping.Rolling theories[M].Beijing:Metallurgical Industry Press,2006:54-58.)