LIN Chao， GU Si-jia. Tooth Contact Algorithm of Line Contact Curve-Face Gear[J]. Journal of Northeastern University Natural Science, 2016, 37(8): 1149-1154.
[1]Litvin F L.Gear geometry and applied theory［M］.Englewood Cliffs:Prentice Hall，1994. [2]Litvin F L，Fuentes A，Zanzi C，et al.Design，generation，and stress analysis of two versions of geometry of face-gear drives［J］.Mechanism and Machine Theory，2002，37(10):1179-1211. [3]Litvin F L，Fuentes A，Zanzi C，et al.Face-gear drive with spur involute pinion:geometry，generation by a worm，stress analysis［J］.Computer Methods in Applied Mechanics and Engineering，2002，191(25):2785-2813. [4]Zanzi C，Pedrero J I.Application of modified geometry of face gear drive［J］.Computer Methods in Applied Mechanics and Engineering，2005，194(27):3047-3066. [5]Guingand M，de Vaujany J P，Icard Y.Analysis and optimization of the loaded meshing of face gears［J］.Journal of Mechanical Design，2005，127(1):135-143. [6]Barone S，Borgianni L，Forte P.Evaluation of the effect of misalignment and profile modification in face gear drive by a finite element meshing simulation［J］.Journal of Mechanical Design，2004，126(5):916-924. [7]彭先龙，方宗德，苏进展，等.应用大碟形刀具加工面齿轮的理论分析［J］.哈尔滨工业大学学报，2013，45(5):80-85.(Peng Xian-long，Fang Zong-de，Su Jin-zhan，et al.Theory analysis for application of disk tool of long radius in face gear machining［J］. Journal of Harbin Institute of Technology，2013，45(5):80-85.) [8]唐进元，刘艳平.直齿面齿轮加载啮合有限元仿真分析［J］.机械工程学报，2012，48(5):124-131.(Tang Jin-yuan，Liu Yan-ping.Loaded meshing simulation of face-gear drive with spur involute pinion based on finite element analysis［J］.Journal of Mechanical Engineering，2012，48(5):124-131.) [9]林超，李莎莎，龚海.正交变传动比面齿轮的设计及三维造型［J］.湖南大学学报 (自然科学版)，2014，41(3):49-55.(Lin Chao，Li Sha-sha，Gong Hai.Design and 3D modeling of orthogonal variable transmission ratio face gear［J］.Journal of Hunan University (Nature Science)，2014，41(3):49-55.)
