东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2012, Vol. 33 ›› Issue (9): 1261-1265.DOI: -

• 论著 • 上一篇    下一篇

异步轧制无取向硅钢的再结晶织构演变

裴伟;沙玉辉;赵瑞清;左良;   

  1. 东北大学 材料各向异性与织构教育部重点实验室;河北宣化钢铁机械制造有限公司;
  • 收稿日期:2013-06-19 修回日期:2013-06-19 出版日期:2012-09-15 发布日期:2013-04-04
  • 通讯作者: -
  • 作者简介:-
  • 基金资助:
    国家自然科学基金资助项目(51171042);;

Recrystallization texture development in asymmetrically rolled non-oriented silicon steel

Pei, Wei (1); Sha, Yu-Hui (1); Zhao, Rui-Qing (2); Zuo, Liang (1)   

  1. (1) Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), Northeastern University, Shenyang 110819, China; (2) Hebei Xuanhua Steel Machinery Co. Ltd., Xuanhua 075100, China
  • Received:2013-06-19 Revised:2013-06-19 Online:2012-09-15 Published:2013-04-04
  • Contact: Sha, Y.-H.
  • About author:-
  • Supported by:
    -

RichHTML

0

PDF (PC)

740

摘要： 在无取向硅钢冷轧过程中采用同步轧制和速比为1.06,1.125,1.19的异步轧制,以考察异步轧制对冷轧和再结晶织构的影响.研究发现,异步轧制减弱冷轧织构中{001}～{112}〈110〉组分,增强{111}〈112〉并减弱{111}〈110〉组分.{111}〈112〉和{111}～{225}〈110〉形变晶粒内剪切带处分别形成η(〈001〉∥RD)及偏离其15°的η′(Ψ=75°,θ=0～45°,φ=0°)再结晶晶粒,η′因晶核尺寸优势发展成为主要织构组分.异步轧制下形变织构的变化有利于改善再结晶织构特征及性能,其影响随速比增大而增强.

关键词: 无取向硅钢, 异步轧制, 织构, EBSD, 磁性能

Abstract: The non-oriented silicon steel sheets were produced by asymmetric cold rolling with three speed ratios of 1.06, 1.125 and 1.19, respectively, and produced also by conventional symmetric cold rolling for comparison. It was found that the asymmetric rolling weakens {001}~{112}<110> components in α fiber (<110>//RD), while strengthens {111}<112> and weakens {111}<110> in γ fiber (<111>//ND). EBSD results showed that η(<001>//RD) and η′ (Ψ=75°, θ=0~45°, φ=0°) grains nucleate within shear bands in {111}<112> and {111}~{225}<110> deformed grains, respectively. η′ becomes the main recrystallization component because of nuclei size advantage. Recrystallization texture and magnetic properties can be improved by the change of cold rolling texture induced by asymmetric rolling, and the effect of asymmetric rolling is more obvious with the increasing of speed ratio.

中图分类号: