东北大学学报:自然科学版 ›› 2014, Vol. 35 ›› Issue (4): 466-469.DOI: 10.12068/j.issn.1005-3026.2014.04.003

• 信息与控制 • 上一篇    下一篇

磁感应成像测量系统的三维仿真模型

宣杨1,王旭1,2,刘承安1,杨丹2   

  1. (1. 东北大学 中荷生物医学与信息工程学院, 辽宁 沈阳110819; 2. 东北大学 信息科学与工程学院, 辽宁 沈阳110819)
  • 收稿日期:2012-12-25 修回日期:2012-12-25 出版日期:2014-04-15 发布日期:2013-11-22
  • 通讯作者: 宣杨
  • 作者简介:宣杨(1985-),女,辽宁辽阳人,东北大学博士研究生;王旭(1956-),男,辽宁沈阳人,东北大学教授,博士生导师.
  • 基金资助:
    中央高校基本科研业务费青年教师科研启动基金资助项目(N100304008).

3D Numerical Model for Magnetic Induction Tomography Measurement System

XUAN Yang1, WANG Xu1,2, LIU Chengan1, YANG Dan1   

  1. 1. School of SinoDutch Biomedical & Information Engineering, Northeastern University, Shenyang 110819, China; 2. School of Information Science & Engineering, Northeastern University, Shenyang 110819, China.
  • Received:2012-12-25 Revised:2012-12-25 Online:2014-04-15 Published:2013-11-22
  • Contact: XUAN Yang
  • About author:-
  • Supported by:
    -

摘要: 为了获得磁感应成像(MIT)三维正问题的解,基于ANSYS软件建立三维磁感应成像测量系统模型,并采用有限元分析方法进行求解.为了验证有限元方法可靠性,建立了Griffiths系统模型,在这一模型基础上进行了相应仿真试验分析.结果与理论计算值及Griffiths的试验结果一致,证明所提方法适用于求解磁感应成像测量系统三维正问题,为进一步研究MIT反问题及更复杂测量系统的设计提供基础.

关键词: 磁感应成像(MIT), 有限元分析, ANSYS软件, 三维仿真, 生物组织电导率

Abstract: The finite element analysis method was used to evaluate the forward problem of threedimensional magnetic induction tomography(MIT). The model of MIT measurement system was established by the ANSYS software. The Griffiths’s system was simulated to validate the reliability of the finite element method. The corresponding tests of simulation analysis were performed based on this model. The results were corresponded with the theoretical value and the Griffiths’s test results. The results showed that the method was suitable for solving the forward problem of threedimensional MIT measurement system, which provided the basis to the further study of MIT inverse problem and more complex measurement system design.

Key words: magnetic induction tomography(MIT), finite element analysis, ANSYS software, 3D simulation, biological tissue conductivity

中图分类号: