基于加热炉多场耦合传热的板坯加热均匀性

doi:10.12068/j.issn.1005-3026.2019.10.009

东北大学学报:自然科学版 ›› 2019, Vol. 40 ›› Issue (10): 1413-1418.DOI: 10.12068/j.issn.1005-3026.2019.10.009

基于加热炉多场耦合传热的板坯加热均匀性

齐凤升，王子松，李宝宽

(东北大学冶金学院，辽宁沈阳110819)

收稿日期:2018-12-30 修回日期:2018-12-30 出版日期:2019-10-15 发布日期:2019-10-10
通讯作者: 齐凤升
作者简介:齐凤升(1980-)，男，辽宁沈阳人，东北大学副教授；李宝宽(1963-)，男，辽宁辽阳人，东北大学教授，博士生导师.
基金资助:
国家重点研发计划项目(2017YFB0304100).

Slab Heating Uniformity Based on Multi-field Coupling Heat Transfer in Reheating Furnace

QI Feng-sheng， WANG Zi-song， LI Bao-kuan

School of Metallurgy， Northeastern University， Shenyang 110819， China.

Received:2018-12-30 Revised:2018-12-30 Online:2019-10-15 Published:2019-10-10
Contact: QI Feng-sheng
About author:-
Supported by:
-

摘要/Abstract

摘要： 针对某钢厂步进式加热炉建立了炉内燃烧、烟气流动、烟气和钢坯传热的全耦合三维模型，采用动网格方法模拟钢坯运动.重点分析了炉内烟气与钢坯耦合传热、钢坯温度均匀性及不同垫块结构(一字型垫块、千岛式垫块、错位梁)时钢坯温度的分布规律.研究结果表明:所提加热炉数学模型能够准确描述炉内燃烧、湍流和传热过程;垫块结构对钢坯温度分布具有决定性影响，千岛式垫块、错位梁分别能减少40%和50%的黑印温差.该数学模型解决了步进梁、钢坯、垫块和水管立柱等复杂结构的钢坯运动问题和加热炉与钢坯的共轭传热问题.

关键词: 步进式加热炉, 炉内燃烧, 耦合传热, 黑印, 数学模型

Abstract: A three-dimensional model， which fully coupled the combustion， flue gas flow， flue gas and billet heat transfer in an eight-staged walking beam reheating furnace in a steel plant was established. The billet motion was simulated by the dynamic mesh method. The heat transfer between flue gas and billet in furnace， temperature uniformity and temperature distribution of billet under different cushion structures(i.e.， a column of cushion block， thousand island cushion block and dislocation beam)were analyzed. The results show that the proposed numerical model for reheating furnace can accurately simulate the combustion， turbulence and heat transfer processes. The structure of cushion block has a decisive influence on the temperature distribution of the billet. Thousand island cushion block and dislocation beam can reduce the temperature difference of skid marks by 40% and 50%， respectively. The numerical model can successfully solve the problems of billet movement and the coupled heat transfer between flue gas and billet for the complex structures like walking beam， billet， pad block and water pipe column in walking beam reheating furnace.

Key words: walking beam reheating furnace, combustion in furnace, coupled heat transfer, skid marks, numerical model

中图分类号:

TK121

齐凤升，王子松，李宝宽. 基于加热炉多场耦合传热的板坯加热均匀性[J]. 东北大学学报:自然科学版, 2019, 40(10): 1413-1418.

QI Feng-sheng， WANG Zi-song， LI Bao-kuan. Slab Heating Uniformity Based on Multi-field Coupling Heat Transfer in Reheating Furnace[J]. Journal of Northeastern University Natural Science, 2019, 40(10): 1413-1418.

参考文献

[1]Kim J G，Huh K Y.Three dimensional analysis of the walking beam type reheating furnace in hot strip mills［J］.Heat Transfer A，2000，38(6):589-609.
[2]Kim J G，Huh K Y.Prediction of transient slab temperature distribution in the re-heating furnace of a walking-beam type for rolling of steel slabs［J］.ISIJ International，2000，40(11):1115-1123.
[3]Kim M Y.A heat transfer model for the analysis of transient heating of the slab in a direct-fired walking beam type reheating furnace［J］.International Journal of Heat and Mass Transfer，2007，50(19):3740-3748.
[4]Han S H，Baek S W，Kim M Y.Transient radiative heating characteristics of slabs in a walking beam type reheating furnace［J］.International Journal of Heat and Mass Transfer，2009，52:1005-1011.
[5]Han S H，Chang D J，Kim C Y.A numerical analysis of slab heating characteristics in a walking beam type reheating furnace［J］.Heat Mass Transfer，2010，53(19):3855-3861.
[6]Han S H，Chang D J，Huh C.Efficiency analysis of radiative slab heating in a walking-beam-type reheating furnace［J］.Energy，2011，36(2):1265-1272.
[7]Han S H，Chang D J.Radiative slab heating analysis for various fuel gas compositions in an axial-fired reheating furnace［J］.International Journal of Heat and Mass Transfer，2012，55:4029-4036.
[8]张卫军，王芳，齐凤升，等.推钢式板坯加热炉流场、温度场和浓度场的模拟研究［J］.东北大学学报(自然科学版)，2011，32(2):266-269.(Zhang Wei-jun，Wang Fang，Qi Feng-sheng，et al.Modeling of flow，temperature and concentration fields in the pusher-type slab reheating furnace［J］.Journal of Northeastern University(Natural Science)，2011，32(2):266-269.)
[9]李国军，刘筱婷，陈海耿.加热炉三维段法动态数学模型在待轧中的应用［J］.东北大学学报(自然科学版)，2011，32(6):818-821.(Li Guo-jun，Liu Xiao-ting，Chen Hai-geng.Application of three-dimensional zone method dynamic mathematic model to rolling delay on reheating furnace ［J］.Journal of Northeastern University (Natural Science)，2012，32(6):818-821.)
[10]李国军，刘筱婷，伊智，等.步进梁式加热炉内布料间距的优化研究［J］.东北大学学报(自然科学版)，2012，33(3):389-391.(Li Guo-jun，Liu Xiao-ting，Yi Zhi，et al.Optimum study of billet space in walking beam furnace［J］.Journal of Northeastern University(Natural Science)，2012，33(3):389-391.)
[11]Dubey S K，Srinivasan P.Development of three dimensional transient numerical heat conduction model with growth of oxide scale for steel billet reheat simulation［J］.International Journal of Thermal Sciences，2014，84:214-227.
[12]Gu M Y，Chen G，Liu W，et al.Numerical simulation of slab heating process in a regenerative walking beam reheating furnace［J］.International Journal of Heat and Mass Transfer，2014，76:405-410.
[13]Mayr B，Prieler R，Demuth M，et al.CFD analysis of a pusher type reheating furnace and the billet heating characteristic［J］.Applied Thermal Engineering，2017，115:986-994.
[14]Chakraborty S，Rajora A，Singh S P，et al.Heat transfer and discrete phase modeling of coal combustion in a pusher type reheating furnace［J］.Applied Thermal Engineering，2017，116:66-78.
[15]Tang G W，Wu B，Bai D Q，et al.CFD modeling and validation of a dynamic slab heating process in an industrial walking beam reheating furnace［J］.Applied Thermal Engineering，2018，132:779-789.
[16]Qi F S，Wang Z S，Li B K，et al.Numerical study on characteristics of combustion and pollutant formation in a reheating furnace［J］.Thermal Science，2018，22(5):2103-2112.

基于加热炉多场耦合传热的板坯加热均匀性

Slab Heating Uniformity Based on Multi-field Coupling Heat Transfer in Reheating Furnace

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	黄雪驰，李宝宽，段怡如，刘中秋. 电渣重熔过程钢中氧含量预测及控制[J]. 东北大学学报（自然科学版）, 2022, 43(4): 524-534.
[2]	叶翠丽，王娜，庞硕，闫航. 基于改进遗传算法的秸秆还田机刀片功耗优化[J]. 东北大学学报（自然科学版）, 2021, 42(9): 1290-1298.
[3]	张镭，赵鑫. 金属链式无级变速器动力特性的研究[J]. 东北大学学报:自然科学版, 2020, 41(3): 361-366.
[4]	郁肖兵，倪文杰，邹宗树. 富氧高炉综合模型[J]. 东北大学学报:自然科学版, 2018, 39(9): 1248-1253.
[5]	杨磊，邱景平，孙晓刚，邢军. 双暴露面的阶段充填体孤柱需求强度模型及影响因素[J]. 东北大学学报:自然科学版, 2018, 39(9): 1327-1331.
[6]	周晓光，陈其源，刘振宇，吴思炜. Ti微合金化汽车大梁钢510L动态再结晶行为[J]. 东北大学学报:自然科学版, 2018, 39(5): 624-629.
[7]	杨红，李建平，许征，孙涛. AZ31温轧过程变形区温度模拟[J]. 东北大学学报:自然科学版, 2017, 38(9): 1247-1250.
[8]	龚殿尧，徐建忠，宋向荣，余四清. 热轧中宽带钢凸度控制模型开发与应用[J]. 东北大学学报:自然科学版, 2017, 38(4): 512-516.
[9]	陈立杰，张明耀，康亚栋. 圆柱度误差可视化的理论研究[J]. 东北大学学报:自然科学版, 2017, 38(4): 527-530.
[10]	陈树宗，李旭，彭文，张殿华. 基于数值积分与功率损耗测试的冷轧电机功率模型[J]. 东北大学学报:自然科学版, 2017, 38(3): 361-365.
[11]	周晓光，郭洪河，蒋小冬，刘振宇. Ti微合金化Q390高强钢热变形行为研究[J]. 东北大学学报:自然科学版, 2017, 38(12): 1702-1706.
[12]	徐海良，陈旺，赵宏强，徐绍军. 反向扩孔气动冲击器内活塞结构的仿真研究与优化设计[J]. 东北大学学报:自然科学版, 2016, 37(9): 1293-1298.
[13]	沈继程，贾涛，刘振宇. 低碳、Ti-V复合微合金化钢的流变应力模型[J]. 东北大学学报:自然科学版, 2016, 37(5): 638-642.
[14]	赵千里，孙志礼，佟操，柴小冬. 移动交界面流固耦合传热的数值稳定性分析[J]. 东北大学学报:自然科学版, 2016, 37(2): 222-226.
[15]	柳政根，储满生，王峥，王宏涛. 高铁铝土矿热压块抗压强度影响因素响应曲面优化[J]. 东北大学学报:自然科学版, 2015, 36(9): 1278-1282.