东北大学学报(自然科学版) ›› 2005, Vol. 26 ›› Issue (5): 437-439.DOI: -

• 论著 • 上一篇    下一篇

半固态ZL201合金的重熔加热合金组织

王平;康皓;路贵民;崔建忠   

  1. 东北大学材料电磁过程研究教育部重点实验室;东北大学材料电磁过程研究教育部重点实验室;东北大学材料电磁过程研究教育部重点实验室;东北大学材料电磁过程研究教育部重点实验室 辽宁沈阳 110004
  • 收稿日期:2013-06-24 修回日期:2013-06-24 出版日期:2005-05-15 发布日期:2013-06-24
  • 通讯作者: Wang, P.
  • 作者简介:-
  • 基金资助:
    国家高技术研究发展计划项目(2002AA337010;2003AA305090);;

Microstructural evolution of the semi-solid ZL201 alloy during remelting

Wang, Ping (1); Kang, Hao (1); Lu, Gui-Min (1); Cui, Jian-Zhong (1)   

  1. (1) Key Laboratory of Electromagnetic Processing of Materials, Northeastern University, Shenyang 110004, China
  • Received:2013-06-24 Revised:2013-06-24 Online:2005-05-15 Published:2013-06-24
  • Contact: Wang, P.
  • About author:-
  • Supported by:
    -

摘要: 采用电子显微镜及图像分析仪,系统研究了近液相线铸造ZL201合金在二次加热过程中的组织演变·结果表明:ZL201铝合金半固态坯料在620~630℃保温5~10min,能够获得适用于半固态成形的触变组织,此时,晶粒平均等积圆直径为43 8μm,晶粒平均圆度为1 87·近液相线半连续铸造可以获得理想的ZL201合金半固态坯料·

关键词: ZL201铝合金, 半固态, 半连续铸造, 重熔加热, 组织

Abstract: The microstructural evolution nearby-liquidus semi-continuous casting ZL201 aluminum alloy during remelting was studied by means of electron microscope and image analyzer. The results showed that a thixotropic microstructure liable to form semi-solid metal is obtained when the alloy is remelted at 620°C - 630°C then held for 5 min - 10 min. Under such conditions, the average equal-area-circle grain diameter is 43.8 μm with average roundness 1.87. An ideal semi-solid or paste-like ZL201 Al-alloy is thus obtained through nearby liquidus semi-continuous casting.

中图分类号: