东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2008, Vol. 29 ›› Issue (10): 1474-1477.DOI: -

• 论著 • 上一篇    下一篇

高速机床主轴部件有限元分析

张耀满;刘春时;谢志坤;刘永贤;   

  1. 东北大学机械工程与自动化学院;沈阳机床(集团)有限责任公司;
  • 收稿日期:2013-06-22 修回日期:2013-06-22 出版日期:2008-10-15 发布日期:2013-06-22
  • 通讯作者: Zhang, Y.-M.
  • 作者简介:-
  • 基金资助:
    国家自然科学基金资助项目(50475052)

FEA on the spindle assembly of high speed machine tool

Zhang, Yao-Man (1); Liu, Chun-Shi (2); Xie, Zhi-Kun (2); Liu, Yong-Xian (1)   

  1. (1) School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110004, China; (2) Shenyang Machine Tool (Group) Co. Ltd., Shenyang 110142, China
  • Received:2013-06-22 Revised:2013-06-22 Online:2008-10-15 Published:2013-06-22
  • Contact: Zhang, Y.-M.
  • About author:-
  • Supported by:
    -

RichHTML

0

PDF (PC)

1269

摘要： 在对主轴部件分析模型进行研究的基础上,采用弹簧阻尼单元模拟轴承支承的方法,建立了主轴部件动力学分析有限元模型.分别建立了采用两组和三组弹簧阻尼单元,且弹簧阻尼单元沿圆周方向以不同角度布置的机床主轴有限元模型,分析了不同支承情况及弹簧阻尼不同布置角度对主轴模态分析的影响.在对比分析的基础上,确定了合理的分析模型.以沈阳第一机床厂研制和开发的CHH6125高速数控机床主轴为对象,对主轴部件进行有限元模态分析和谐响应分析,并将其和机床试验的结果进行对比,验证了有限元分析模型的正确性.

关键词: 数控机床, 高速机床, 主轴部件, 有限元分析, 动态性能

Abstract: The finite element dynamic analysis model of the spindle assembly was developed by taking the advantage of the spring-damper elements to simulate the bearing supports. The FEA model were developed first by introducing 2 or 3 groups of circumferential spring-damper elements which were arranged at different angle around the spindle, then the effect of different supporting conditions and different arrange angles on the modal analysis of the spindle assembly were comparatively discussed to select the most rational FEA modal. The modal analysis and harmonic analysis were both made to confirm the dynamic characteristics of spindle assembly of CHH6125 high-speed NC machine tool developed and manufactured by Shenyang No.1 Plant of Machine Tools, and the results were compared with the testing ones. The correctness of the FEA model is available to the dynamic performance of the spindle assembly.

中图分类号: